Machining Aluminum

Customized aluminum parts Cnc milled aluminum parts cnc turned aluminum parts edm / wire edm aluminum parts surface grinding aluminum parts welding aluminum parts swiss turning aluminum parts Description Customized aluminum parts Material: al7075al5052al6061al6063aluminum alloy. Surface roughness: max ra 0.4-0.8 Plating:electroless nickel.Anodizedhard anodized Industry: Automation and control engineering Automotive and vehicle construction Lighting industry Office machinery and supplies Electrical industry Telecommunication industry Packaging industry Machine tool manufacturing Medical technology Measurement and control technique, laboratory equipment Paper and printing machinery industry Special purpose machinery manufacturing Quantity: 1-5 pcs, 5-50pcs.50-500pcs, 500-10000pcs.

The machine for cutting short material, small, large amount of development design. The saw cut surface is bright and clean without burr, without secondary processing. High efficiency, high precision, suitable for cutting various kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic, plexiglass (acrylic), carbon fiber materials, etc. Especially suitable for electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk, MP3 shell aluminum shell, U disk shell...Precision sawing. 1. Strong structure, strong rigidity, small vibration, saw blade from the top down saw cutting, saw cutting precision is high. 2. NC controller and touch screen are used for easy operation and fault detection. 3. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing. 4. Servo motor is used to drive ball screw, with an accuracy up to 0.01mm. The machine will automatically stop without material induction during the processing. 5. The clamp is designed with pressing and side clamp, which can clamp irregular materials with firm clamping. 6. Special sawing action design feeding mode :1. Step feeding 2. Reciprocating feeding 3. Manual feeding. 7. A new design and upgrading of the waste discharge and discharge system creates a clean and tidy working environment. Model ZG-360NC Cutting Angle 90° Cutting ability mm 110 105Ã?105 175Ã?50 90 80Ã?80 Machine motor 5.5HP 4P Saw blade 2850R.P.M Feed servo motor 1KW Blade size Tungsten steel blade with blade tip Ï?305ã??405Ã?Ï?25.4mm Operating air pressure 6-8kg/cm2 Machine dimension 2000Ã?1100Ã?2006 Machine weight 960kg

Product Introduction: 5086 aluminum plate, with thickness more than 6mm and magnesium content between 3.5% - 4.5% by weight, belongs to high-magnesium and non-heat-treatable alloy, and has higher strength than 5052 and little lower strength than 5083 aluminum alloy. -

This equipment is widely used in manufacturers of aluminum alloy ingots and zinc alloy ingots. It has the characteristics of automatic aluminum water distribution, adjustable casting speed, automatic ingot tapping and demolding, high production efficiency, uniform aluminum ingot weight, no large or small ends, and smooth surface. The casting process has a high degree of automation and low labor intensity. The casting mold is made of ductile iron, with a long service life

Insruction This machine is used for winding coils for distribution transformer , electric motor in many kinds shapes.It is unique, professional, easy operating, plc control and get high praise from user, like toshiba of japan, abb, hyosung etc. Technical parameter Model Rx-1 General Power 3kw Working voltage Ac3 x 380v Coil Coil width (max) 1500mm Coil weight(max) 1000kg Winding shaft Rotation speed (max) 120rpm Shaft height 850mm

Instruction: Clamping core foil winding machine for power transformers and reactors industry foil line Laps wound. Foil coil or in a different thickness of copper foil with a conductor, like broadband Insulating material for interlayer insulation, complete wound on the winding machine, formed into a roll-shaped coil. Meanwhile End A coil inside and outside surface dressing. The shape of the coil may be circular, elliptical, rectangular and the like. Main components of the machine: 1. Foil material uncoiler 2. Feeding wool pressure device 3. Winding device 4. Insulation unwinding device 5. Correction system 6. Main Frame 7. Automatic welding equipment 8. Pneumatic devices 9. Electrical System Main Technical Parameters: Item Technical Parameters Product Name Foil winding machine Model BRJ1102 Height of coil 1100mm Thickness of foil 0.5-2.5 mm Max. outer diameter of coil 1000mm Form of coil Rectangular; Round;oval Winding speed 0-20r/min stepless frequency speed adjustment Max. tension of foil tape 6000N stepless and adjustable Winding power 15KW Welding method/speed TIG/0-1.5r/min Rectification accuracy±0.5mm

Product Detail: It is special machine used for processing series connection holes and grooves and the transmission device for plastic doors and windows. It is made up three hole drilling unit and copy routing unit. It can drill three horizontal holes and route longround holes in the vertical direction. Two working steps can be finished with one time clamping. It has the features of high accuracy, easy operation. . Main Technique Parameter: Voltage:380V~415V/ 50HZ Motor Power: 2.25Kw Air Pressure:0.5~0.8Mpa Air Consumption:30L/Min Hole Adjusting Range: 330*85*100mm Copy Routing Range: 90~290mm Overall Dimension:1000*1130*1500mm Weight:260KGS HONGKONG

Voltage:AC220V/380V Power:750W Blade:6/8inch Function:the aluminum gem cutting machine adopt high quality aluminum surface, and using 8 inch blade, the 20mm,25mm inner bore blade can also be installed. It's convenient to use and durable which is suitable for precise cutting.

Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass (acrylic) and carbon fiber materials, especially suitable for copper and aluminum electronic components, radiator, audio panels, graphics CARDS, network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell type aluminum extrusion and precision cutting of different profile. 1 high precision sawing, no burr, no need for secondary processing, high efficiency. 2 only foot switch, automatic mechanical pressure and sawing. Safe and easy. Pressure parts using high quality rubber strip, not easy to damage the surface of the workpiece. 3 hidden saw blade sawing from the bottom up, high safety, single or multiple materials sawing at the same time, small vibration, low noise. 4 the pressure system is driven by two-way linear bearing and controlled by an independent air pressure cylinder, with high pressure stability (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure) 5 press height and speed and saw cutting height and speed can be set according to material size and thickness. 6 the spindle runs at high speed, and equipped with automatic oil injection device, to provide the saw blade with proper lubrication, make the workpiece surface smoother without burr, extend the service life of the saw blade 7 additional Angle template can be cut Angle. Model ZG-455SAL specifications Sawing angle 90°&45° Maximum sawing width 300mm Maximum sawing height 140mm Saw blade 3200R.P.M Blade size Tungsten steel blade with blade tip Ï?355-455Ã?Ï?25.4mm Size of Table 650Ã?670Ã?860mm Machine motor 5HP/2P three-phase Pressure required 5-6kg/cm2 Machine dimension ( LxWxH ) 1030Ã?860Ã?1360mm Packing dimension ( LxWxH ) 1050Ã?880Ã?1380mm NW/GW 335/385kg