Fsg rosin glycerol ester tackifying resin series
Fsg series glycerol ester of rosin is made up of rosin or modified rosin as the basic raw material , through decoloration , esterification , stabilizing process with a lighter color, stability of tackifying resin products.
Itemfsg80fsg85fsg90fsg95fsg100fsg105
Color (gardner color 50% toluene solution)2-42-42-42-42-42-4
Softening point77-8383-8788-9593-9898-106103-108
Acid value (mgkoh/g)303030303030
Melt viscosity (150) centipoise200-600300-700300-800800-2000800-20001500-4000
Ash content 0.10.10.10.10.10.1
Relative density (20)â±0.031.061.061.061.061.061.06
Flash point230230230240240250
Application: used in hot melt adhesive, pressure sensitive adhesive, film adhesive , such as bookbinding glue, all-purpose adhesive, adhesive, adhesive tape, hot melt woodworking adhesives products , can also be used for coating products.
Product feature: high softening point , light color , low odor , good antioxidant and heat resistance, can greatly improve the adhesion of pressure-sensitive adhesives, available with a variety of polymer , such as sis|, sbs, nr, cr, sbr, eva, and eaa miscible in any proportion, soluble in many organic solvents such as toluene, xylene, petroleum ether, ethyl acetate, acetone.
Package: 25kg net in pe bag or paper bag.
Safety attention: waterproof, fireproof, away from flammable item and peroxides.
Remarks: can produce according to customers specific requirement or method.
Fsp series pentaerythritol ester is made by rosin or modified rosin through esterification, esters, stabilized and made of light color, low odor, strong stability of a series of tackifying resin. Itemfsp95fsp95afsp100fsp100afsp105fsp110fsp115fsp120 Color (gardner color 50% toluene solution)2-42-42-42-40-12-40-1.52-5 Softening point ?95-10095-10098-10399-106100-106100-106108-116108-116 Acid value (mgkoh/g)¤30¤30¤3030-40¤30¤30¤30¤30 Melt viscosity (150?) centipoise 600-1800600-18001000-25001000-25001500-30002000-50002500-60004000-16000 Ash content %¤0.10.10.10.10.10.10.10.1 Relative density (20?)0.031.061.061.061.061.061.061.061.06 Flash poin240240240240250250260260 Application: used in hot melt adhesive, pressure sensitive adhesive, film adhesive, plastic, such as adhesive glue stick, colloidal particles, such as sanitary napkin glue, adhesive, adhesive tape, glue, wood glue, etc.; can also be used for coating products. Product feature: light color, low odor, good heat tolerance, can improve adhesion of hot melt pressure sensitive adhesive, and can mix with a variety of polymers such as eva, eaa, nr, sbs, sis , soluble in toluene, xylene, ethyl acetate, acetone, petroleum ether, vegetable oils, and other organic solvents. Package: 25kg net in pe bag or paper bag Safety attention: waterproof, fireproof, away from flammable item and peroxides. Remarks: can produce according to customer?s specific requirement or method.
Supplier: All type clothes, urea, all type agriculture and food items, all personal and entertainment items, all industrial and automotive items, all construction household and furnishing, all computers electronics and electrical, handicraft, items, npk, fertilizers t shirt, blanket,dry fruits, animal feeds, towel, bedsheets, toys, all grocery, copper wire scrap, copper ore concentrate, zinc ore concentrate, lead concentrate, fly ash, a4 paper, a3 paper, craft paper, occ, ldpe, hdpe , pvc resin, petroleum products, jp54, jet a1, crude oil, blco , biodiesel, diesel, fuel, coal, d2, petcock, pulses, mustard oil, spices , sanitizer, gloves, medical products, cement, core sand, old ships lng, lpg, all groceries items, food products, hms1 and hms2, fish, chicken feet, chicken paws, agri & food processing agriculture products, fertilizers, seeds, farm products grains, fruits, vegetables, river sands, aggregates, pvc electrical wire, rice, charcoal, wheat flour
Services: Export, import, merchant export import
Buyer: All metals, minerals, petroleum products, food products and paper products
We deals in the following products :- 1) PVC Resin 2) Caustic Soda Flakes
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Crystals Benzoin Siam Crystals
Nitrogen - 46% min Moisture - 1% max Biuret - 1% max Prilled - 0.85-2mm Granular - 2-4mm 90-94%min color - Pure White Radiation - Non-Radiactive Free Ammonia - 160pxt ppm max
Damar products is still needed throughout the world, it can have significant impact on price increases. We provide this Damar on an ongoing basis and can serve exports to your country
Damar products is still needed throughout the world, it can have significant impact on price increases. We provide this Damar on an ongoing basis and can serve exports to your country. With quality packaging and production processes, making the products we sell have selling points that are not only economical but also safe. With our full support we help you become an importer of the products we sell.
We are supplier and exporter of Ferro Silicon. Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags. Ferro Silicon Ferro Silicon has a melting point of 1200�?�°C to 1250�?�°C with a boiling point of 2355�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
