Coating Series

BOYET Series Product Name/Modelï¼?BYT Clear Coat Series Characteristic: 1ã?� BYT518 Clear Coat ï¼?Two- component 518 clear coat with super-high density and solid,deep rich gloss, high hardness, excellent weathering and chemical resistance. Applies to senior cars, suitable for overall refinish, quality and performance compare favourably with many imported clear Coats 2ã?� GH418 Clear Coatï¼?Two-component fast drying 418 clear coat with excellent gloss, high hardness, excellent weathering and chemical resistance. 3ã?� LA318 Clear Coatï¼?High gloss 318 clear coat, with high richness, good levelling property, easy construction, high hardness, excellent chemical and weathering resitance. Be paint film in lower temperature. Application in Medium, Senior car, MPV, Bus. 4ã?� BYT228 Clear Coatï¼?High gloss and high hardness two-component 228 clear coat, easy construction, fast dry, good pretective power and weathering resistance, save cost and time during refinish.Application in standard car, construction machinery.

Gx series coating machine Usage: for producing half-finished products of opp box sealing adhesive tape, double-faced adhesive tape, mask tape, pvc adhesive tape, aluminun foil adhesive tape, and other adhesive tape . Width of the product roll:500mm-2000mm Terms of heating:by steam, eletric heat, hot-blast, hot-oil and other terms. Machine speed:10m-150m/min Standard lot size: Weight: Dimensions:

Silicone rubber coated fiberglass fabric series The products are made of fine fiberglass with excellent capacity of high temperature and corrosion resistance, coated and rolled with silicone rubber, which is a brand new product with good performance and multiple applications. W:1200mm l:100m

Series 1: Pure aluminum (high content of aluminum), low-cost and single process,as conventional industrial aluminum. 1100 alloy is general industrial pure aluminum with aluminum content of 99.0%. Lower strength but good ductility. Formability, weldability and corrosion resistance; O temper: Low tensile 75-105MPa, high elongation, Suitable for stretching products; H24 temper: Tensile above 110MPa, suitable for Ceiling/curtain wall; H26 temper: Relative to H24, the hardness is higher than 130MPa. Poor bending. Application: Large-scale stadiums, airports, high-speed rail stations and other interior decoration. url:

3003, an Al-Mn alloy, which is the most widely used rust-proof aluminum. The strength of this alloy is not high (slightly higher than industrial pure aluminum) and it cannot be strengthened by heat treatment. Therefore, cold processing method is used to improve its mechanical properties. In the annealed state, high plasticity. When the semi-cold hardening, the plasticity is still good, when the cold hardening, bad plasticity and machinability, but good corrosion resistance and weldability. For low load parts that require high plasticity and good weldability to work in liquid or gaseous media. Such as 3003H24 fuel tank, gasoline or lubricant conduit, various liquid containers and other deep-drawn low-load parts, and wire rods are used to make rivets. Bending performance: The conventional 90-degree bend, and below 0.8 can meet the requirement of short-edge roofing application. Coating Application: Roofing sheet, ceiling, interior decoration,curtain wall, ACP.

Series 1: Pure aluminum (high content of aluminum), low-cost and single process,as conventional industrial aluminum. 1100 alloy is general industrial pure aluminum with aluminum content of 99.0%. Lower strength but good ductility. Formability, weldability and corrosion resistance; O temper: Low tensile 75-105MPa, high elongation, Suitable for stretching products; H24 temper: Tensile above 110MPa, suitable for Ceiling/curtain wall; H26 temper: Relative to H24, the hardness is higher than 130MPa. Poor bending. Application: Large-scale stadiums, airports, high-speed rail stations and other interior decoration.

3003, an Al-Mn alloy, which is the most widely used rust-proof aluminum. The strength of this alloy is not high (slightly higher than industrial pure aluminum) and it cannot be strengthened by heat treatment. Therefore, cold processing method is used to improve its mechanical properties. In the annealed state, high plasticity. When the semi-cold hardening, the plasticity is still good, when the cold hardening, bad plasticity and machinability, but good corrosion resistance and weldability. For low load parts that require high plasticity and good weldability to work in liquid or gaseous media. Such as 3003H24 fuel tank, gasoline or lubricant conduit, various liquid containers and other deep-drawn low-load parts, and wire rods are used to make rivets. Bending performance: The conventional 90-degree bend, and below 0.8 can meet the requirement of short-edge roofing application. Coating Application: Roofing sheet, ceiling, interior decoration,curtain wall, ACP.

It is a kind of equipment integrating elegance, high efficiency, energy-saving, safety, easy to clean, which is applied for coating traditional Chinese and Western tablets and pills, including the micro pills and granulated pills, small pills, water pills, drip and granulated pills, with sugar, organic film, water soluble, film, slow and controlled release film in the fields of pharmacy, food and biology etc. The machine is equipped with the programmable PLC(machine and person interface), with which its operation process and process parameters such as negative pressure and temperature can be automatically controlled. Itf+s easy to operate, with reasonable and advanced process during run of the machine.Main machine, cleaning system, hot air cabinet, exhaust cabinet and the thermostatic mixing drum are all made of imported high quality, stainless steel, which conforms to GMP requirements.The tablets make complicated and constant track movement with easy and smooth turning and frequent exchanging in a clean and closed drum of the film coating machine. The coating mediums stirred in the constant temperature-stirring drum are prayed on tablets through the spray gun at the inlet under the action of crawler pump. Meanwhile, the hot air up to 100,000 level filtration is inhaled through the air-distributing pipe at the center of the drum and flowed through tablets around the fan blade. Under the action of air exhausted and negative pressure, hot air are exhausted from another side of the air-distributing pipe and discharged after dust abatement. So these coating mediums on the surface of tablets get dry quickly, forming a coat of film, fine and smooth film. Automatically controlled by PLC, itf+s in normal operation.

Supplier: Powder coating, epoxy/pure polyester/epoxy-polyester series powder coating