PBO fiber is the kind of material that can resist high temperature up to 600. The needle-punched endless belt that combines PBO and Kevlar layer is the ideal product to use for pick-up.
We can supply PU timing belt for aluminium extrusion industry , it's real seamless belt , if you have any request ,please contact me
Product introduction: High temperature resistant felt belt is often used in aluminum factory. Our product is made of PBO and Kevlar. It have heat resistance characteristics.Its temperature resistance can up to 600 degrees for a short time (about 15 minutes) and 550 degrees for a long time. Specifications: Brand:HUATAO material :PBO + kevlar + one layer Nomex tension member color:brown and yellow Size:Make-to-order Work temperature:600 degrees for a short time(15mins) 550 degree for a long time Length:900mm-25000mm Width:20mm-1700mm Thickness:5mm-15mm PBO Thickness: 2mm~8mm Advantages: 1. Temperature resistance up to 600�C; 2. High density structure; 3. Abrasion resistance with smooth cutting and even surface; 4. Long service life against high quality; 5. Pollution-free for extrusions; 6. Competitive price and good service after sales.
Twisted woven endless round belts, twisted woven rope belts, twisted woven o-ring. These are truly endless belts, the joint of the belt gets builded-up in the weaving itself. These are made in nylon, polyester and kevlar yarn. These are extensively used in textile, spinning, woollen mills. These drive belts are quite suitable for machine tool industry. These replacement belts can be supplied on wooden board to make sure the accurate size. These rope belts can also be made in interlock weaving for high speed rotations. These belts are specially treated with industrial chemicals to reduce the elongation and to make the resistance against high temperature. These belts can be maid either in twisted or interlock weaving in the following sizes. Diameter : 3 to 24 mm or 0.13" to 2" Length : 360 mm or 14" to unlimited endless length.
Kevlar endless belt for aluminum extrusion.
Pob+kevlar endless belt.
Supplier: PBO/kevlar roller sleeve, kevlar roller sleeve, nomex roller sleeve, polyester roller sleeve, PBO /kevalr endless endless belt, kevlar endless belt, nomex endless belt, polyester endless belt, PBO /kevlar pad, kevlar pad, nomex pad, nomex spacer sleeve, kevlar gloves, timing belt
Flat transmission belt is a common flat rubber belt, also called transmission belt, usually uses high-quality cotton canvas as its skeleton layers.It is mainly used in factories, mines, docks, metallurgical industry, ordinary mechanical power transmission, great power processing of grains like rice and wheat, irrigation equipment, wood cutting and other power transmitting equipment for industry.
Description: Kevlar endless belts are mainly used in pick-up and the first-stage cooling table. Our Kevlar endless belt is very good in temperature resistance (500?)and anti-abrasion. Specification: Material:PU felt+synchronous belt(hot melt bonding) Temperature Resistance:180?600? Length:2000mm25000mm Width:20mm200mm Total Thickness:6mm 8mm 10mm 12mm Feature:Strong tension,no deviation,non slip,low noise Application Area:2500T10000T Extrusion production line Application: Mostly suitable for the aluminum profiles with the high quality surface requirement,avoid the loss in second operation's and transit bumps or rub when in roduction. Company Name:HUATAO
100% Nomex Heat Transfer Endless Belt Description: Heat Transfer Printing Belts are produced from 100% Nomex fiber. They are the most important component of the heat transfer printing machines. We can offer the felts with the normal and special size according to customer?s request. Felt Features: needled felt, smooth surface,elastic, non-off tracking. Heat Transfer Printing Felts are used on the following machines : Monti, Lemaire, Bater, Stork, Futanet, Gessner etc. Specification: Material:100%Nomex Temperature:220°c ~ 280°c Colors:White Density:2800g/m2- 3600g/m2 Function:Belt Conveyor Part Place Of Origin:China Delivery Time:Within 15 Days Delivery After Receipt Your Payment Advantage 1. Selection Of Brand Raw Material,Common Specifications Have Temperature 160-180? And 220-280?. 2. The Felt Belt Contains Heat Shrinkable Fiber Material Inside,The Felt Will Automatically Shrink After Heating,Wrapped Tightly. 3. The Belt Surface Formation,Uniform Density,Good Resistance,Long Work Life. Application 1. Selection Of Brand Raw Material,Common Specifications Have Temperature 16-180? And 220-280?. 2. The Felt Belt Contains Heat Shrinkable Fiber Material Inside,The Felt Will Automatically Shrink After Heating,Wrapped Tightly. 3. The Belt Surface Formation,Uniform Density,Good Resistance,Long Work Life. Direction of our felt belt 1. The blanket must be install as the direction of the arrow, fixing both sides of the perimeter to see if the perimeter is the same. 2. Adjust the machine pressure within 2kg. heat up to 150 ?, idle for 2 hours; heat up to 170?, idle for 2 hours; heat up to 190?, idle 3 hours( important); heat up to 200?, idle for 2 hours. 3. Then the belt will suitable for your machine, you can adjust the machine pressure in 3--5kg according to your needed and start to printing.