Tungsten Carbide Balls

The component of yg6 tc-balls Grade component hardness density Applications: yg6 tc-balls all is widely used in a variety of hardware industry, valves, bearings, die-casting, punching parts, grinding, measuring. Features: the main components are tungsten-cobalt alloy (wc-co) with a high hardness, hra90-92, abrasion resistance is better, Its wear resistance is hundreds time previous to steel balls The component of yg6x tc-balls Grade component hardness density Bending strength porosity analysis Wc co hra g/cm3 g/�o Yg6x 94% 6% 92 14.6-15.0 1450 a02b02c02 Applications: yg6x carbide ball is widely used in a variety of hardware industry, valves, bearings, die-casting, punching parts, grinding, measuring, Chemical, petroleum, and military.Features: the main components are tungsten-cobalt alloy (wc-co) with a high hardness it is a fine-grained alloy. It��s hardness and wear resistance is a little better than yg6x alloy balls, but it��s toughness is slightly lower than the ball of yg8, So it is suitable for production of wear-resistant alloy and impact-resistant parts The component of yg8 tc-balls Grade component hardness density Bending strength porosity analysis Wc co hra g/cm3 g/�o Yg8 92% 8% 89 14.4-14.8 1800 a02b02c02 Applications: yg8 carbide is widely used in ball valves, bearings, die-casting, punching parts, grinding, measuring, hardness tester, petroleum, chemical, aviation and aerospace. Features: the main components are tungsten-cobalt alloy (wc-co) with a high hardness and wear resistance, it��s toughness is better than yg6 alloy ball and has good anti-vibration shock engaged in the performance, suitable for production of strong shock and vibration components

Tungsten carbide (TC) balls are used where extreme hardness and wear resistance is required; in such applications as bearings, ball screws, valves and flow meters. They are also used for coining and as pivots, detents and tips for gages and tracers. Decimal-inch sized tungsten carbide balls are widely used for ballizing (below) or measuring hole sizes (see Inspection Products data sheet.) They are also used for inspection tools, comparative checking and gaging.

Features: --Superior wear resistance --High hardness and mechanical strength --Good corrosion resistance --High precision for tolerance They're widely used in oil&gas, bearings, ball screws,valves and flow meters.pen,spraying machines,pump,machinery parts and other industries. Grade Density g/cm3 Hardness HRA(hv) T.R.S (M Pa) Performances & applications recommended YG6 14.9 89.5 2150 Good Wear resistance, used for hard wood,processing original wood,aluminum section bar,brass rod and cast iron. YG8 14.6 89 2320 Suitable for the roughening of cast iron and light alloys and also for the milling of cast iron and low-alloy steel.

This balls and valve seats are comprise of tungsten carbide (WC) and Co or Ni in high temperature sintering.With high hardness, better wear-resistant, high-temperature corrosion -resistant and maching properties of high working accuracy.high finish etc. Widely supplied ball-rolling element in bearing industry, pump valve spool for fluid seal, check valve for pretroleum digger etc.also used in high-tech area in army and civil. The specification can be made upon customer' s requirements

Material: YG6 YG6X YG8 YG10 YG13 YN6 YN8 YN10 YN12 Diameter: 0.4-50.8mm Application: Subtle bearings, precision sealing, measurement tools, squeeze the hole, stamping steel / brass stampings.

Material: YG6 YG6X YG8 YG10 YG13 YN6 YN8 YN10 YN12 Diameter: 0.4-50.8mm Application: Subtle bearings, precision sealing, measurement tools, squeeze the hole, stamping steel / brass stampings.

Features: --superior wear resistance --high hardness and mechanical strength --good corrosion resistance --high precision for tolerance They're widely used in oil&gas, bearings, ball screws, valves and flow meters.Pen, spraying machines, pump, machinery parts and other industries. Grade Density G/cm3 Hardness Hra(hv) T.R.S (m pa) Performances & applications recommended Yg6 14.9 89.5 2150 Good wear resistance, used for hard wood, processing Original wood, aluminum section bar, brass rod and cast iron. Yg8 14.6 89 2320 Suitable for the roughening of cast iron and light alloys and Also for the milling of cast iron and low-alloy steel. Faq: Q1. Can i have a sample order ? A: yes, we welcome sample order to test and check quality. Mixed samples are acceptable. Q2. What about the production time? A:sample needs 3-5 days, mass production time needs 2-3 weeks for order quantity more than Q3. How do you ship the goods and how long does it take to arrive? A: we usually ship by dhl, ups, fedex or tnt. It usually takes 3-5 days to arrive. Airline and sea shipping also optional. Q4. How to proceed an order ? Firstly let us know your requirements or application. Secondly we quote according to your requirements or our suggestions. Thirdly customer confirms the samples and places deposit for formal order. Fourthly we arrange the production.

Damage Free Tungsten Carbide Ball Ultra Smooth Writing Technology Elegant Look Pocket Size

Tungsten carbide ball and valve seats for oil industry