The problem of collection of ash, worn down, low temperature corrosion exists in the air preheater to effect the safe and economical operation for the boiler unit. At the moment, the investment of air preheater is 6%-8% of the whole boiler investment in the industrial boiler and power station boil, due to the problem of collection of ash, worn down, low temperature corrosion to incur the direct loss of replacing equipment and shutting down is 4-5% of the operation cost and the loss will be more large when the boiler is shut down incurred by this problem.
The enamel steel tube is manufactured with the enamel which is developed by our company with the scientific formula and is evenly coated on the surface of the steel tube by the auto enamel tube production line. To use enamel tube as the heat exchange parts will be anti-abrasion and anti-corrosion, the surface is smooth and low cost of maintenance.
Supplier: Chemical, chemical raw material, auxiliaries, solvents, paint, coating, rubber, plastic, plasticizer, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, pipe fitting, flange, fasteners, steel wire, steel accessories
Services: Transportation agent,customs clearance service,
Buyer: Import chemical raw materials, auxiliaries, bulk commodities
The air preheater exists the problem of collection of ash , worn down , low temperature corrosion to effect the safe and economical operation for the boiler unit . At the moment , the investment of air preheater is 6%-8% of the whole boiler investment in the industrial boiler and power station boil , due to the problem of collectionof ash, worn down, low temperature corrosion to incur the direct loss of replacing equipment and shuting down is 4~5% of the operation cost and the loss will be more large when the boiler is shut down incurred by this problem . Aim at the above questions,we develop the new heat transfer parts â??â??Enamel coated seam or seamless tubes with small enamel thickness ratio of thermal conductivity and received 5 patents . The uniform colour enameled tube is manufactured with the enamel which is our own developed with the scientific formula and is evenly coated on the surface of the steel tube by the auto enamel tube production line . To use best temperature change performance enameled tubes as the heat exchange parts will be anti-abrasion and anti-corrosion, the surface is smooth and low cost of maintenance .
Supplier: Paint, varnish, industrial coatings, flooring epoxy, epoxy primer, epoxy self leveling, nitrocellulose paints, heat resistant coatings, wood coatings, pu coatings, enamels, emulsions
Buyer: Titanium dioxide, pigments, additives and resins
Supplier: Emulsions, enamels, water based interior and exterior coatings. Epoxy, polyurethane, textured paints, universal tinters, nc paints for wood and metals and powder coatings, water based decorative paints, emulsions Enamel (oil based paints) , wood glue
Best price industrial boiler enamel tube air preheater with good quality is the equipment that uses the boiler tail flue smoke to heat the entering air with its inside tubes .It is used to improve the heat exchange performance of the boiler, and reduce energy consumption. 1. Best price industrial boiler enamel tube air preheater with good quality are not easily broken enamel surface, no crack, acid and alkali resistance, resistance to gas erosion, smooth and high, gas flow resistance, easy Fouling; 2. As the flue gas across tube, the flue gas side of the heat capacity of exile to strengthen, under the same heat transfer coefficient (enamel thickness ratio of thermal conductivity with very small, about 0.0002, the calculation is negligible), wall temperature vertical preheater than ordinary steel increased 10-30 Degree Celsius, the overall heat transfer coefficient of about 20.3-24.2W; 3. Two horizontal enamel sealing tube box, the sealed tube box structure welded high strength, pipe damaged or the overall change can only block, and heat-packing seal, can only replace the damaged pipe tube, easy maintenance; 4. Best price industrial boiler enamel tube air preheater with good quality is mainly used for boiler preheater, the low temperature.
1. The preheater tubes are not easily broken enamel surface, no crack, acid and alkali resistance, resistance to gas erosion, smooth and high, gas flow resistance, easy Fouling; 2. As the flue gas across tube, the flue gas side of the heat capacity of exile to strengthen, under the same heat transfer coefficient (enamel thickness ratio of thermal conductivity with very small, about 0.0002, the calculation is negligible), wall temperature vertical preheater than ordinary steel increased 10-30 Degree Celsius, the overall heat transfer coefficient of about 20.3-24.2W;
Supplier: Premium Enamels, Synthetic Enamels, Furniture Enamels, Hammertone/hammertex Finishes, Metallic Texture Finishes, Knifing Putties, Red Oxide Primers, White Primers, Green Primers, Yellow Primers, Grey Surfacers, Brown Primers, Greenboard Paint, Blackboard Paint, Pink Surfacers, Aluminum Paints, Gold Paints, Clear Varnishes, Insulating Varnish, Auto Finishes, & Water Based Exterior & Interior Finishes.
Supplier: Automotive coatings, body filer primer nc paint acrylic varnish, wood coatings, wood sealer wood stain nc surfacer wood varnish, solvents, nc thinner acrylic thinner industrial solvents
China hot water boiler spare parts enamel tube with asme standard is manufactured with the enamel which is developed by our company with the scientific formula and is evenly coated on the surface of the steel tube by the auto enamel tube production line. To use enamel tube as the heat exchange parts will be anti-abrasion and anti-corrosion, the surface is smooth and low cost of maintenance. The introduction of China hot water boiler spare parts enamel tube with asme standard. Material: carbon steel, corten steel or equivalent The air preheater exists the problem of collection of ash, worn down, low temperature corrosion to effect the safe and economical operation for the boiler unit. At the moment, the investment for air preheater is 6%-8% of the whole boiler investment in the industrial boiler and power station boil, due to the problem of collection of ash, worn down, low temperature corrosion to incur the direct loss of replacing equipment and shuting down is 4-5% of the operation cost and loss will be more large when the boiler is shut down incurred by this problem. Aim at the above questions, we established the exclusive enamel research and development center to supply the complete solution and organize the specific research personnel to tackle key problems, and proceed the large quantities of simulated test and operation test to develop the new heat transfer parts ---enamel tubes and received 5 patents.
