The air preheater exists the problem of collection of ash , worn down , low temperature corrosion to effect the safe and economical operation for the boiler unit . At the moment , the investment of air preheater is 6%-8% of the whole boiler investment in the industrial boiler and power station boil , due to the problem of collectionof ash, worn down, low temperature corrosion to incur the direct loss of replacing equipment and shuting down is 4~5% of the operation cost and the loss will be more large when the boiler is shut down incurred by this problem .
Aim at the above questions,we develop the new heat transfer parts â??â??Enamel coated seam or seamless tubes with small enamel thickness ratio of thermal conductivity and received 5 patents .
The uniform colour enameled tube is manufactured with the enamel which is our own
developed with the scientific formula and is evenly coated on the surface of the steel tube by
the auto enamel tube production line . To use best temperature change performance enameled tubes as the heat exchange parts will be anti-abrasion and anti-corrosion, the surface is smooth
and low cost of maintenance .
Best price industrial boiler enamel tube air preheater with good quality is the equipment that uses the boiler tail flue smoke to heat the entering air with its inside tubes .It is used to improve the heat exchange performance of the boiler, and reduce energy consumption. 1. Best price industrial boiler enamel tube air preheater with good quality are not easily broken enamel surface, no crack, acid and alkali resistance, resistance to gas erosion, smooth and high, gas flow resistance, easy Fouling; 2. As the flue gas across tube, the flue gas side of the heat capacity of exile to strengthen, under the same heat transfer coefficient (enamel thickness ratio of thermal conductivity with very small, about 0.0002, the calculation is negligible), wall temperature vertical preheater than ordinary steel increased 10-30 Degree Celsius, the overall heat transfer coefficient of about 20.3-24.2W; 3. Two horizontal enamel sealing tube box, the sealed tube box structure welded high strength, pipe damaged or the overall change can only block, and heat-packing seal, can only replace the damaged pipe tube, easy maintenance; 4. Best price industrial boiler enamel tube air preheater with good quality is mainly used for boiler preheater, the low temperature.
1. The preheater tubes are not easily broken enamel surface, no crack, acid and alkali resistance, resistance to gas erosion, smooth and high, gas flow resistance, easy Fouling; 2. As the flue gas across tube, the flue gas side of the heat capacity of exile to strengthen, under the same heat transfer coefficient (enamel thickness ratio of thermal conductivity with very small, about 0.0002, the calculation is negligible), wall temperature vertical preheater than ordinary steel increased 10-30 Degree Celsius, the overall heat transfer coefficient of about 20.3-24.2W;
China hot water boiler spare parts enamel tube with asme standard is manufactured with the enamel which is developed by our company with the scientific formula and is evenly coated on the surface of the steel tube by the auto enamel tube production line. To use enamel tube as the heat exchange parts will be anti-abrasion and anti-corrosion, the surface is smooth and low cost of maintenance. The introduction of China hot water boiler spare parts enamel tube with asme standard. Material: carbon steel, corten steel or equivalent The air preheater exists the problem of collection of ash, worn down, low temperature corrosion to effect the safe and economical operation for the boiler unit. At the moment, the investment for air preheater is 6%-8% of the whole boiler investment in the industrial boiler and power station boil, due to the problem of collection of ash, worn down, low temperature corrosion to incur the direct loss of replacing equipment and shuting down is 4-5% of the operation cost and loss will be more large when the boiler is shut down incurred by this problem. Aim at the above questions, we established the exclusive enamel research and development center to supply the complete solution and organize the specific research personnel to tackle key problems, and proceed the large quantities of simulated test and operation test to develop the new heat transfer parts ---enamel tubes and received 5 patents.
The problem of collection of ash, worn down, low temperature corrosion exists in the air preheater to effect the safe and economical operation for the boiler unit. At the moment, the investment of air preheater is 6%-8% of the whole boiler investment in the industrial boiler and power station boil, due to the problem of collection of ash, worn down, low temperature corrosion to incur the direct loss of replacing equipment and shutting down is 4-5% of the operation cost and the loss will be more large when the boiler is shut down incurred by this problem. The enamel steel tube is manufactured with the enamel which is developed by our company with the scientific formula and is evenly coated on the surface of the steel tube by the auto enamel tube production line. To use enamel tube as the heat exchange parts will be anti-abrasion and anti-corrosion, the surface is smooth and low cost of maintenance.
Supplier: Valve, enamelled copper wire, copper tube, magnet
Brief Introduction Air preheater is the equipment that uses the boiler tail flue smoke to heat the entering air with its inside tubes .It is used to improve the heat exchange performance of the boiler, and reduce energy consumption. To adapt the different boiler burning type, different fuel and different fume ingredient, we developed the below enamel tube air preheaters to fit the different mediem: 1. The CFB boiler and coal powder boiler used enamel steel tubes, seam or seamless steel tube with green colour. 2. The rubbish burning furnace, biomass boiler used enamel steel tubes, seam or seamless steel tube with blue colour. 3. The Chain grate and layer burning boiler used enamel steel tubes, seam or seamless steel tube with brown colour. 4. The oil burning boiler, coking boiler and gas boiler used enamel steel tubes,seam or seamless steel tube with dark green. Why Choose Us? 1). Chinese famous brand 2). Competitive price with trusted quality 3). Short delivery lead time and excellent after-sale service 4). Certificate ISO9001, ISO14001, 5). We always produce good quality products with competitive price. 6). We have 50 professional engineers, 15 professional and technical teams for boiler improvement and more than 100 success cases of boiler energy-saving technological transformation.
Supplier: Electrolytic copper, oxygen-free copper bar, various copper wire, enamel-covered wire, brass & bronze sheets/bar/tubes, brass & bronze valves and fittings, Nd-Fe-B magnets and stainless steel
Buyer: Copper & brass scrap, birch/cliff, honey, ocean, stainless steel scrap
1. The preheater tubes are not easily broken enamel surface, no crack, acid and alkali resistance, resistance to gas erosion, smooth and high, gas flow resistance, easy Fouling; 2. As the flue gas across tube, the flue gas side of the heat capacity of exile to strengthen, under the same heat transfer coefficient (enamel thickness ratio of thermal conductivity with very small, about 0.0002, the calculation is negligible), wall temperature vertical preheater than ordinary steel increased 10-30 Degree Celsius, the overall heat transfer coefficient of about 20.3-24.2W; 3. two horizontal enamel sealing tube box, the sealed tube box structure welded high strength, pipe damaged or the overall change can only block, and heat-packing seal, can only replace the damaged pipe tube, easy maintenance; 4. The preheater is mainly used for boiler preheater, the low temperature.
An air preheater (APH) is a general term used to describe any device designed to heat air before another process (for example, combustion in a boiler) with the primary objective of increasing the thermal efficiency of the process. They may be used alone or to replace a recuperative heat system or to replace a steam coil. Normal air preheater exist the problem of collection of ash,worn down,low temperature corrosion to effect the safe and economical operation for the boiler unit. So HTEG established the exclusive enamel research and development center to supply the complete solution and organize the scientific reserach personnel to tacle key problems and develop the new heat transfer parts-enameld tubes air preheater The purpose of the boiler heat exchanger parts air preheater is to recover the heat from the boiler flue gas which increases the thermal efficiency of the boiler by reducing the useful heat lost in the flue gas. As a consequence, the flue gases are also conveyed to the flue gas stack (or chimney) at a lower temperature, allowing simplified design of the conveyance system and the flue gas stack. It also allows control over the temperature of gases leaving the stack (to meet emissions regulations, for example). Advantages of our product GB3274 enameled tube air preheater a).Improve and strengthen the combustion when crosses air preheater then enters the furnace, accelerates the fuel drying,the ignition and combustion process, ensures stable combustion in the furnace, and it is good for improving, strengthening the combustion effect. b). strengthen heat transfer due to improved and intensified combustion furnance and the hot air temperature in the furnace is improved, the average temperature level in the furnace is improved, thereby strengthening the furnace radiation heat transfer.
