Scope
Petroleum wax penetration tester applies GB/T4985-84 "petroleum wax needle penetration assay", also applies to ASTM-D1321 "petroleum wax needle penetration test" and ISO3992 "petroleum wax needle penetration test". Petroleum wax penetration test is a multipurpose common type, with automatic control devices and with a special needle into the standard petroleum wax pieces. It can be petroleum wax penetration test, with the relevant standards penetration member, It can also be used to verify the test substance and cheese, sugar gum, butter, cream, fermented solid body, fine powders of colloidal, freeze the like other food raw materials.
Features
1, the time controller with digital display, control time range: 0 to 9 minutes and 59 seconds, accuracy: ± 0.1 seconds.
2, the digital display depth measuring mechanism, easy to use, good repeatability, high accuracy.
3, the maximum measurable penetration value of not less than 620, can adapt to various test requirements.
4, stents were pointed needles move quickly and fretting two easy alignment of the test operation of the sample surface.
5, stand there with even self-locking function can be securely anchored anywhere.
6, with the table horizontal adjustment mechanism, easy to adjust.
7, with a manual release mechanism of the penetration member, when not in use to ensure that the release time of the automatic control, able to operate normally.
Technical Parameters
1, Power: AC220V ± 10% 50Hz
2, Input power: 1000W
3, Timing range: 0.01 ~ 99.99S
4, Delay control accuracy: � 0.3% ± 0.05S
Fds-1401 petroleum wax penetration tester Scope Petroleum wax penetration tester applies gb/t4985-84 "petroleum wax needle penetration assay", also applies to astm-d1321 "petroleum wax needle penetration test" and iso3992 "petroleum wax needle penetration test". Petroleum wax penetration test is a multipurpose common type, with automatic control devices and with a special needle into the standard petroleum wax pieces. It can be petroleum wax penetration test, with the relevant standards penetration member, it can also be used to verify the test substance and cheese, sugar gum, butter, cream, fermented solid body, fine powders of colloidal, freeze the like other food raw materials. Features 1, the time controller with digital display, control time range: 0 to 9 minutes and 59 seconds, accuracy: ± 0.1 seconds. 2, the digital display depth measuring mechanism, easy to use, good repeatability, high accuracy. 3, the maximum measurable penetration value of not less than 620, can adapt to various test requirements. 4, stents were pointed needles move quickly and fretting two easy alignment of the test operation of the sample surface. 5, stand there with even self-locking function can be securely anchored anywhere. 6, with the table horizontal adjustment mechanism, easy to adjust. 7, with a manual release mechanism of the penetration member, when not in use to ensure that the release time of the automatic control, able to operate normally. Technical parameters 1, power: ac220v ± 10% 50hz 2, input power: 1000w 3, timing range: 0.01 ~ 99.99s 4, delay control accuracy: = 0.3% ± 0.05s
Scope Applied standards: gb/t269-91?iso2137-85?astmd217-82?ip50-79 Application range: it’s applied to the viscosity of lubricating grease and malthenes (vaseline) also used to test the materials like solids, particle and powder colloid and froze materials as well as the food raw materials like cream, carbohydrate gum, butter and barmy cream, etc. Features 1. It can allow the test in a different direction, and can even be used in a constant temperature water bath; 2. With digital display depth measuring mechanism, easy to use, good repeatability and high accuracy; 3. Bracket move fast and fretting two kinds of speed, ease of test operation of the tip of the needle at the surface of the sample; 4. It has a table level adjusting mechanism, and easy to adjust; 5. With manual release pin into pieces of bodies, to ensure that in the not automatically controlled release, still normal operation. Technical parameters 1. Time controller Control range: 0-9 minutes and 59 seconds; Control time accuracy: ± 0.1 seconds; 2. Maximum measurable penetration: 620; 3. Standard cone: 102.5g (with gb / t requirements); 4. Standard ram: 47.5g (with gb / t requirements).
Scope Applied standards: gb/t269, iso2137, astmd217, ip50 Applied range: the grease by mechanical shearing and consistency change, then with the cone penetration tester were measured to determine the mechanical stability of grease. Features 1. With integrated design, easy operation and maintenance; 2. It adopts imported motor drive, low noise, long life; 3. With automatic timing to the alarm system; 4. Using the results of the double bomb, to facilitate the operation of parallel experiments. Technical parameters 1. Shear rate: 60 times / min; 2. The working stroke: 67 ~ 71mm; 3. The number of significant count: 0 to 10 million times; 4. Count method: automatic; 5. Motor power: 370w
Scope Petroleum products copper corrosion tester for gb / t5096, iso2160, astm d130, ip154 "petroleum products copper corrosion test method" determination of aviation gasoline, jet fuel, motor gasoline or has reye's vapor pressure of not more than 124kpa (900mmhg) other hydrocarbons, solvent oil, diesel oil, distillate fuel oil, lubricants and other petroleum extent of corrosion products on the copper. Features 1, the operating parameter set with the keyboard. 2, intelligent control system, touch the button to set, high brightness lcd dot matrix english display. 3, the test bath with accurate temperature control of the metal bath, completely avoid evaporation of water bath and oil bath arising inconvenience. 4, copper corrosion test time can be set and alarms. 5, measurement and control system has a self-diagnostic function. Technical parameters 1, the metal bath thermostatic control range: 40-200 ?, 2, temperature accuracy: ± 0.2 ? 3 heating power: 1200w 4, metal thermostatic bath can withstand the test pressure 0.7mpa. 5, automatic timing: 0-599min (keyboard settings, increment 1 min) 6, the test bath: to place the three trials and three test tubes elastomer simultaneously
Scope Applied standards: gb/t2539, astm d87, iso3841 Features 1. With integrated design, easy operation and maintenance; 2. With pid temperature control, high precision, stable; 3. With automatic chronograph, alarm system ; 4. With double elastic, easy to operate parallel experiments. Technical parameters 1. Applied standards: gb/t2539 iso2707; 2. The temperature control means: quantity pid temperature controller; 3. Work: two holes; 4. Power supply: ac220 ± 50% 50hz; 5. Total power: 300w
Scope This instrument conforms to GB/T4509, GB/T269, ASTMD217, JTJ052-2000, T0604 and other related standards. It is suitable to determine needle penetration of asphalt and cone penetration of grease. The instrument can also be used to test food ingredients solid granules, powders, gels, body frozen and other materials, as well as cheese, sugar gum, butter, wheat its pouring, butter, fermented the like, in the food industry, highway traffic engineering and other industries department can be widely used. Features 1. It integrates new design concepts about penetrometer all over the world. It is advanced and delicate. 2. It can make determination for needle penetration and cone penetration. 3. It controlled by a computer, it can measure the needle penetration and cone penetration automatically. The test data are accurate and reliable. 4. The newly designed up and down assembly can be adjusted freely. 5. Equipped with automatic temperature controlling device and magnetic stirrer, so the bath temperature is uniform with high temperature controlling accuracy. 6. All parameters are shown on the LCD in real time. 7. Equipped with a micro-printer, so it can print out test data. 8. It has a computer communication port to communicate with a computer. Technical Parameters 1. Measurement range: 0~600 penetrations; 2. Resolution: 0.1 penetrations; 3. Timing selection: 0~60 s; Timing error is less than ±0.1 s; 4. Heating power: 200 W; 5. Temperature controlling accuracy: 25±0.1 °C; (the Ambient temperature should not be higher than 20 °C); 6. Data storage: 30 groups; 7. Constant temperature bath: made of harden glass; 8. Stirrer: a magnetic stirrer; 9. Standard needle: 2.5±0.05g; as per GB/T4509, and T0604; 10. Up and down holder: it contains fine adjustment and coarse adjustment assembly to let needle tip just contact with sample surface; 11. Power supply: AC 220V±10%, 50 Hz; 12. Memory function: it can save 30 groups of test data;
Glycerine, or glycerol is a simple polyol compound. It is a sweet, colorless, odorless, nontoxic and viscous liquid. It can absorb moisture from air and also can absorb hydrogen sulfide, sulfur dioxide and hydrogen cyanide. It is insoluble in benzene, chloroform, carbon tetrachloride, carbon disulfide, petroleum ether and oil. Application 1 In coating industry, as raw material for manufacturing nitroglycerin, alkyd resin, epoxy resin; 2 In textile and dyeing industry, glycerol is use to produce lubricant, moisture absorbent, anti-shrinkage fabric treatment agent, dispersing agent and penetrating agent; 3 In medicine, glycerol is used to make various preparations, solvent, hygroscopic agent, antifreeze and sweeteners, compounding topical ointment and suppository; 4 In food, it is used as sweetener and in tobacco, glycerol is used as moisture absorbent and solvents; 5 Glycerol is also widely used in paper-making, cosmetics, leather industry, photograph, printing, rubber, etc.
Scope Asphalt penetration tester according to the national standard GB/T4509 â??petroleum asphalt penetration testâ?�, the national industry standard T0604 â??Asphalt penetration test,â?� the requirements of the design and manufacturing for the determination of petroleum asphalt, bitumen has a penetration degrees, the sample was placed in a constant temperature 25 ± 0.1 °C bath load of 100g standard pin, the vertical movement without significant friction, within 5 seconds in the vertical depth of penetration into the asphalt sample, called penetration bitumen. Features 1. Asphalt penetration tester with integrated design, easy operation and maintenance; 2. Asphalt penetration tester with automatic chronograph, digital display depth; 3. Asphalt penetration tester has a lifting frame using the coarse and fine adjustment function, convenient adjustment of the needle accurately. Technical Parameters 1. The maximum penetration: 500 Penetration 2. Penetration accuracy: ± 1 Penetration 3. Time-controlled options: 60 seconds two tranches 4. Control accuracy: 5 ± 0.1 s 5. Heating power: 220W 6. Temperature accuracy: 25 ± 0.1 â?? 7. The standard needle: 2.5 ± 0.05g 8. Thermometer: 0-50 â??, 0.1 indexing 9. The cooling mode: compressor refrigeration (according to user needs matching, FDL-0302 configuration)
Supplier: Paraffin wax, petroleum jelly, finished lubricant, slack wax, white oil, transformer oil, residue wax, base oil, bitumen, rubber processing oil
