Fused Cast Azs33

What's Fused Cast

The term Fused Cast refers to a manufacturing process in which the ceramic bonding is obtained by the solidification of a mixture which has been melted in an electric furnace and cast in liquid state into molds.

Fused Cast AZS Blocks Introduction

AZS fused cast block is also called fused cast block which is abbreviated as AZS because it contains Al2O3ZrO2SiO2. Fused cast AZS block is made from pure alumina powder and Zircon sand (composed of 65% zirconia and 34% SiO2). After Alumina powder and zircon sand melting in electric furnace, they are cast into various molds and cool themselves down to become white solid. Because of the different content of Zirconia from 33%-41%, our fused cast AZS blocks can be divided into three types 33,36 and 41.

TY-AZS33 Description

Fused cast AZS 33 block has dense micro structure which ensures its great resistance in glass liquid, thus you donâ??t have to worry about the solidification and other problems. It is widely applied to glass furnace for superstructure, working pool side wall, paving blocks, feeder channels, tank bottoms, C-shaped block and doghouse crown,etc.

Advantages
1. Compact microstructure
2. Good erosion resistibility to molten glass
3. Good thermal shock resistibility,high compression resistance
4. Barely rendering blister
5. A variety of formats and shapes for furnace different working areas

Azs 33#, 36#, 41#

Commodity: Synthetic Cryolite
Formula: Na3AlF6
M.W.: 209.95

Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively.

Specifications:
Appearance white powder
F 52% min
Al 12% min
Na 33% max
SiO2 0.36% max
Fe2O3 0.08% max
CaO 0.5% max
P2O5 0.03% max
SO4 0.6% max
H2O 0.4% max
Loss on ignition 2 % max

Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels.

Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.

Ramming mass is commonly used in metallurgy, building materials, non-ferrous metal smelting, chemical, machinery and other manufacturing industries.
Ramming mass is widely used in non-core intermediate frequency furnace and core induction furnace.
As an intermediate frequency furnace ramming material, refractory ramming is applied to melt gray cast iron, nodular cast iron, malleable cast iron, vermicular cast iron, and cast alloy steel; to melt carbon steel, alloy steel, high manganese steel, tool steel, heat resistant steel, stainless steel, molten aluminum and its alloys; to melt red copper, brass, white brass, bronze and its alloys, etc.

Induction furnaces are used for melting cast iron, mild steel and various alloy steels in foundries and making of steel in mini steel plants using sponge iron
The refined high silicon, low iron quartz sand and quartz powder are selected and the fused quartz sand is added as the refractory material., with no slag, no crack, damp proof, convenience of repair, and the corrosion resistance, thus greatly improving the furnace service life span and the economic benefit..
Silica ramming mass can safely be used up to an operating temperature of 1600 deg C. Since it expands very little, it is superior to both alumina and magnesia refractories to resist thermal shocks
Acid ramming material is the premixed ramming mass of the lining material. The acid ramming mass is used to smelt a series of metal materials such as ordinary steel and carbon steel.
The lining practice best suited to a particular furnace depends upon the capacity and design of the furnace, operation practice adopted during making of a heat, and furnace output.

Smart Home Appliances- Irons
Cordless Iron
OEI-687 CL DX
Pink

? 1200W Power
? Cordless Steam / Spray / Dry Ironing
? German Grade Non Stick Coated Sole Plate
? Cast In Sole Plate Technology For Faster and Uniform
Heating
? Thermostat for Variable Temperature Control with Power Indicator
? Thermal Fuse for Over Heat Safety Protection
? Drip Stop Technology
? Shock Proof Plastic Body
? Cool Touch Body with Comfortable Handle Grip
? Button Groove: Reaches into Tricky

Smart Home Appliances
Irons
Cordless Iron
OEI-687
CL DX Green

1200W Power
Cordless Steam / Spray / Dry Ironing
German Grade Non Stick Coated Sole Plate
Cast In Sole Plate Technology For Faster and Uniform
Heating
Thermostat for Variable Temperature Control with Power Indicator
Thermal Fuse for Over Heat Safety Protection
Drip Stop Technology
Shock Proof Plastic Body
Cool Touch Body with Comfortable Handle Grip
Button Groove: Reaches into Tricky

Smart Home Appliances
Irons
Cordless Iron
OEI-687
CL DX – Blue

? 1200W Power
? Cordless Steam / Spray / Dry Ironing
? German Grade Non Stick Coated Sole Plate
? Cast In Sole Plate Technology For Faster and Uniform
Heating
? Thermostat for Variable Temperature Control with Power Indicator
? Thermal Fuse for Over Heat Safety Protection
? Drip Stop Technology
? Shock Proof Plastic Body
? Cool Touch Body with Comfortable Handle Grip
? Button Groove: Reaches into Tricky