Features Low Insertion loss Wide pass band High Channel Isolation High stability and reliability Epoxy free on optical path Applications Channel Add/Drop DWDM Network Wavelength Routing Fiber Optical Amplifier CATV fiberoptical System
The HT6000-OD/OM16 from HTF is a combined passive Sixteen-Channel 100GHz DWDM multiplexer or de-multiplexer (MUX or DEMUX), It combines standard 100GHZ DWDM ITU grid channels 21 through 60, and applies to 1U chassis ,2U chassis and 5U chassis,occupying one service slots. The HT6000-OD/OM16 is ideal for increasing the fiber capacity between two sites without the need for installing or leasing additional fibers. The complete passive solution requires no power cabling and no configuration; it is a true plug and play solution. The Mux/Demux enables separation of the active equipment from wavelength multiplexing components. It may be used in conjunction with active optical devices from HTF or from another DWDM-compliant manufacturers.
DWDM Module can solve the shortage of fiber resources and transparent transmission of business, and reduce the cost of network Construction. With low-cost and compact dimension, it is mainly used in metropolitan area network and access layer, also be used to build networks.
GLsun's DWDM-SFP25G-10-C17-T02 single-mode transceiver is SFP28 25G DWDM 10KM transceiver for duplex optical data communications support up to 25.78Gb/s. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I C. It has built-in clock and data recovery (CDR). This module is designed for single-mode fiber. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gb/s Wavelength 1563.86nm~1528.77nm Max Cable Distance 10km Connector Duplex LC Transmitter Type 1563.86nm EML Extinction Ratio 3.5dB Media SMF Power Consumption
DWDM is the use of the bandwidth of single mode fiber and low loss characteristics, adopt multiple wavelength as the carrier, allowing the carrier channel in the optical fiber to transmit at the same time.
FWDM is based on proven thin-film folter technology.This WDM is widely used in fiber optical communication system and EDFA where flat and broad operating bands are needed.
Features Up to 11.3Gb/s data links DWDM EML transmitter and PIN receiver 50 GHz ITU channel spacing with integrated wavelength locker Up to 40km on 9/125µm SMF Hot-pluggable SFP+ footprint Duplex LC/UPC type pluggable optical interface Metal enclosure, for lower EMI RoHS compliant and lead-free Support Digital Diagnostic Monitoring interface Single +3.3V power supply Maximum power consumption 1.5W Compliant with SFF+MSA and SFF8472 Case operating temperature Commercial: 0 ~ +70oC Extended: -10 ~ +80oC Industrial: -40 ~ +85oC Applications 10GBASE-ER/EW & 10G Ethernet SDH STM64 Other Optical Links
Features Up to 11.3Gb/s data links DWDM EML transmitter and APD receiver 50 GHz ITU channel spacing with integrated wavelength locker Up to 80km on 9/125µm SMF Hot-pluggable SFP+ footprint Duplex LC/UPC type pluggable optical interface Metal enclosure, for lower EMI RoHS compliant and lead-free Support Digital Diagnostic Monitoring interface Single +3.3V power supply Maximum power consumption 1.5W Compliant with SFF+MSA and SFF8472 Case operating temperature Commercial: 0 ~+70oC Extended: -10 ~ +80oC Industrial: -40 ~ +85oC Applications 10GBASE-ZR/ZW & 10G Ethernet SDH STM64 Other Optical Links
Features Up to 11.3Gb/s data links DWDM EML transmitter and PIN receiver 100 GHz ITU channel spacing with integrated wavelength locker Up to 40km on 9/125µm SMF Hot-pluggable SFP+ footprint Duplex LC/UPC type pluggable optical interface Metal enclosure, for lower EMI RoHS compliant and lead-free Support Digital Diagnostic Monitoring interface Single +3.3V power supply Maximum power consumption 1.5W Compliant with SFF+MSA and SFF8472 Case operating temperature Commercial: 0 ~ +70 oC Extended: -10 ~ +80 oC Industrial: -40 ~ +85 oC Applications 10GBASE-ER/EW & 10G Ethernet SDH STM64 Other Optical Links