FEATURES
Modes & protection
CC, CV, CP, CR, DYNA, List, Sweep, OCP modes.
LED mode, real simulating LED loading.
Over current, over voltage, over power, over temperature, polarity reversed protection.
Automatic test alone
Press one button to complete load effect, ripple, dynamic, OCP and Short circuit test.
Show complete test report and support step test.
Multi load synchronous control
Support up to 16 loads Sync. loading & dynamic test, fit for testing multi-output power supply.
Support up to 16 loads parallel mode for high power.
High rising speed (The full range current rising time is 10us)
High speed & accuracy
With 0.03% accuracy and 500kHz frequency, the current slew rate can be programmed.
500kHz sync. sampling frequency with 15Hz data update rate, 0.03% accuracy, 10uA &100uV resolution.
Real-time measurement of Vpp/Vp+/Vp-/Ipp/Ip+/Ip-
Dynamic test and control
Up to 50kHz dynamic loading frequency & real-time measurement of peak voltage (Vp+/Vp-).
Support sync. control and sync. dynamic loading of multi loads.
Support frequency sweep up to 50kHz.
List function
8 List files, each file with 200 steps and 2us resolution.
Support up to 50kHz complex waveform editing.
Each step current slew rate can be programmed.
Automatic OCP Testing & Pmax Measurement
Automatically test OCP.
Capture automatically Pmax & the voltage and current when working at the Pmax point.
Trigger and timing measurement
Support voltage/current waveform trigger and timing measurement.
Support external trigger for the power supply startup time / hold time measurement.
Support waveform capture and test for OVP protection point and protection time.
Application of program controlling
SCPI Protocol, isolated RS232 serial port.
5V/200mA power output, fit for the interconnection of equipments with different interfaces.
TRIG_INã?�RIã?�DFIã?�TRIG_OUT four high-speed isolated I/O, supporting multi loads sync.control.
Precision high speed digitizing measurement/ data captureï¼?500kHz / 16 bits / 4096 points).
The AN23500(F)/AN23600(F) series DC electronic load is a new DC load launched by Ainuo Instruments, covering voltage of 150V, 600V and 1200V, and the power 150W~48kW. This series of electronic load is mainly used for testing of products in many fields such as new energy vehicle OBC, power battery, charging spot test, power electronics, servo/server power supply, high voltage UPS, photovoltaic, grid energy storage, aerospace and other fields. A new generation of digital controller is adopted, with built-in five modes and a variety of advanced modes, to meet the programming, automated testing and other needs. Features: Low power AN23500(F) series stand-alone input power: 600W, 1200W, voltage: 150V, 600V Medium power AN23600(F) series stand-alone input power: 2kW-48kW, voltage: 150V, 600V, 1200V Multi modes: CC, CV, CP, CR, CCD, LIST, AUTO ï¼?for AN235 seriesï¼?, OCP, OPP, LED (for AN235 series), Short, FLEX, BATY, etc. Excellent performance indicators: accuracy of loading and measuring: 0.05%+0.05%FS (for AN235 series), dynamic loading frequency of 50kHz (for AN236 series) CV loop adjustable, adapt to different power sources (for AN236 series) 500kHz high-speed voltage /current sampling (for AN236 series) Instant overpower load pull (for AN236 series) Current rise rate up to 12As (for AN236 series) Protection: OTP (over temperature protection), OVP (over voltage protection), OPP (over power protection), SCP (short circuit protection), RVP (reverse voltage protection), SSP (remote sampling line unconnected protection), OOP (Power supply, load invalid power-off protection), HWP (patent: hardware forced lock), SWP (patent: software forced lock) Rich ports: built-in common protocols such as SCPI, MODBUS, and PLC port, suitable for system integration Simple and practical: full-color LCD screen, clear and beautiful; operation menu, easy to learn and use.
ANEL series feedback DC electronic load adopts high-frequency PWM rectification and bidirectional DCDC conversion, FPGA digital control, energy feedback to the grid at full power, more energy-saving, green and environmentally friendly compared with conventional DC load; advanced digital control, ultra-high control accuracy, fast response, wide output voltage range, it can achieve full range of load input from 0V to full scale. The feedback DC electronic load realizes the DC load function of automatic energy feedback to the grid. Compared with the conventional load, it is more convenient and safe. The conventional load is energy-consuming, and energy is consumed by resistance heating; the feedback DC electronic load is energy-feeding, and the energy is fed back to the grid, green, environment friendly, reliable, safe, featuring outstanding advantages. Features: Two-stage circuit of PWM rectification and bidirectional DCDC, achieving load of automatic energy feedback to the grid, energy saving, green and environment protection. Mainstream high-frequency PWM rectification control, power factor 0.99, THD and injected harmonic current meet the requirements of GB/T14549-93, high-quality energy feedback to the grid. High-precision output: accuracy of voltage and current: �±0.1% F.S. Fast dynamic response: response time for 10%-90% sudden applied load and 90%-10% sudden shedding load: â?¤5ms Optimized bidirectional DCDC conversion, wider range of DC input voltage, 0V-full scale DC input. CC, CV, CP modes. Multi protection: input over-voltage/under-voltage, lack phase, output over voltage, IGBT overheat, IGBT over current, over temperature protection, short circuit current-limiting protection. Built-in EMI filter to filter the interference signal caused by the high-frequency switching process. Communication and remote control: standard CAN, RS232/RS485 port and remote control software of the upper computer. Efficiency up to 95% under rated conditions. Large-screen LCD display, compatible with buttons and touch screen, suitable for operation under various harsh operating conditions. Screen (key) lock: After the power supply is not operated for more than 5 minutes, the keyboard and input of touch screen will automatically be locked. Application: Fuel cell test Testing of charger and charging pile Battery pack, battery pack discharge test Capacitor, super capacitor discharge test Power electronics test Energy storage system converter test Replace conventional DC load
Input Voltage 12V / 24V DC optional Output Voltage 115V / 230V AC optional Portable power for AC products, AC outlets for connecting multiple loads High surge capacity for products that require more power to start High efficiency converts virtually all of the battery's power to AC Mounting brackets for convenient installation Heavy duty stud-connection mounting RS232 communication port WIFI/BMS Optional Overload and over temperature shut down Low voltage and over voltage alarm/cut off Input reverse protection Short circuit protection PI15 series is a pure sine wave inverter, high frequency machine solution, the product is small size, the solution is reliable and stable, the main function is to invert the DC 12VDC battery or 24VDC battery to AC 230VAC or AC 115VAC output, mainly used for emergency use Electricity, car inverter, outdoor electricity and other occasions.
GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and high security power services. Safe and reliable High quality li-ion cell for mobile use Laser welding connection with high strength and low impedance Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation Damping pad design to improve the impact resistance of the system IP54 safe and reliable operation in outdoor environment Serially designed PCS and battery pack eliminates circulating current and improve system reliability. Integrated BMS,DC, AC multi-layer protection, maximum safety performance design Efficient and Convenient Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion Easy access to PV and diesel generator, intelligent muli-energy management. Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring Multi systems could be connected in parallel Cost optimization One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc. Small size, light weight, less space and installation cost Long cycle life, low failure rate, reduce operation and maintenance investment Maximize green energy utilization. Rated output power: 50KW Rated energy: 75KWH
Features : 3 times peak power, excellent loading capability. Combine inverter/solar controller/battery all in one. Multiple output : 2*AC output socket, 4*DC 12V, 2* Working mode AC prior/ECO mode/Solar prior selectable AC charging current 0 1 0A selectable. LVD/HVD/Charging voltage adjutable, suitable for kinds of battery Adding fault code to monitor real time work situations Continuous stable p ure sine wave output with inbuilt AVR stabilizer . Digital LCD and LED for visualization of operation status of the equipment. Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
KELB15 is a precision programmable DC electronic load controlled by a high performance microprocessor. It uses 3.5-inch TFT true color LCD display offers 4 basic working modes (CC/CV/CR/CW) and 10 functional modes. With comprehensive protection, over-heat protection, over-current protection, over-power protection, over-voltage protection, loop oscillation protection. KELB15 series E-load supports RS232, LAN, USB and analog interfaces to fit your versatile solution and testing needs
KELB60 is a precision programmable DC electronic load controlled by a high performance microprocessor. It uses 3.5-inch TFT true color LCD display offers 4 basic working modes (CC/CV/CR/CW) and 10 functional modes. With comprehensive protection, over-heat protection, over-current protection, over-power protection, over-voltage protection, loop oscillation protection. KELB60 series E-load supports RS232, LAN, USB and analog interfaces to fit your versatile solution and testing needs
KELB180 is a precision programmable DC electronic load controlled by a high performance microprocessor. It uses 3.5-inch TFT true color LCD display Offers 4-basic working modes (CC/CV/CR/CW) and 10 functional modes. With comprehensive protection, over-heat protection, over-current protection, over-power protection, over-voltage protection, loop oscillation protection.KELB180 series E-load supports RS232, LAN, USB and analog interfaces to fit your versatile solution and testing needs.
PA66 FR regrind black color Pa6 / pa66 is mainly applied as follows: 1. Improves nylon water absorption and improves size stability of the product. 2. Improved nylon fire resistance to meet the requirements of electronics, electrical, communications and other industries. 3. Improved mechanical strength of nylon to achieve the strength of metal materials, metal replacement. 4. Improves nylon low-temperature resistance and enhanced resistance to environmental stress. 5. Improves nylon wear resistance to meet high wear resistance requirements. 6. Improves nylon antistatic properties to meet its extraction requirements and mechanical applications. 7. Improves nylon heat resistance to adapt to high temperature conditions such as car engines. 8. Reduce nylon cost and improve product competitiveness. Through the above modification, high performance and functionalization of nylon composite materials are realized, thereby promoting the development of industries involving high performance and high quality. MATERIAL : PA66 FR regrind black color CATEGORY : PA66 FG TYPE : Regrind GRADE : Black color SPECIFICATION : GF50. 1 full container available Origin : Tunisia LOADING WEIGHT 23 Ton FOB (USD/Ton) : 750$ - 950$ Packaging : Jumbo Bag Est. Shipping Time: 15, 30, 45 days
