The product also has the following features:
1. The effective play of the motor power, high efficiency.
2. High absorption material, the actual pumping efficiency reached the theoretical value reached more than 80%, save the labor cost.
3. The device reliability
4. Long service life
5. The operation is simple
6. Oil supply adequate, lubrication effect is good, save consumption by more than 50%.
7. The buffer technology makes system reversing impact small, produce less heat.
8. The quality is light, is equipped with wheel, convenient to move, easy maintenance, low maintenance costs.
9. Full mechanized operation, shorten the construction period and improve labor productivity.
10. The use of power is only 11 kw, save electricity.
11. Can be put directly on the floor on site pouring, and it is not restricted by pumping height
Secondary Structural Column Pump A concrete delivery pump, also known as a concrete pump, is composed of pump body and delivery pipe. It is a kind of machinery that uses pressure to continuously transport concrete along the pipeline. It is mainly used in housing construction, bridge and tunnel construction.
Supplier: HT line material, DG set, turbines, pumps, motors, submersible pumps, sluice valve, centrifugal pumping sets, chloroform plant, HT cables, IT cables, wires, lighting fixtures, lamps tubes, steel tubular poles, spare of all machinery parts, MCCBS MOCB, starters, MCBS, ACB, OCB, HT panel
Services: We provide liaison work with government departments in Jammu and Kashmir for all types. Like with power department, muncipality and pollution board
Golden-Aqua-Smart / WITHOUT PUMP 12 Inline HND 5 Micron Spun (Sediment) Filter 12 Inline HND Carbon Jammy Filter (UDF) 12 Inline HND Block Carbon Jammy Filter (CTO) 10 Inline PALLAS Post Carbon Filter 80GPD PALLAS Membrane Shut-Off Valve 24V Pump (available in pump models) 24V 1.5A Adapter (available in pump models) 60 PSI Pressure Reducer
3GP and 5GP Series Steam Injection Pumps are widely used in secondary recovery. It increases the flow into wellbore by adding pressure to the reserve and reducing the viscosity of oil at the same time. Steam injection is also applied to primary recovery to optimize efficiency nowadays. This series are one of the first pumps that Maxfully developed for EOR. Input and output sides are interchangeable to allow maximum flexibility. Field proven design guarantees efficiency and reliability.
This ink pump assembly consists of the pump that supplies the ink from the main tank to the secondary tank on HP Scitex XlJet printers. This is the original HP / HP Scitex part (number 507001230). Printer compatibility HP Scitex XL1200 2.2M (XLJet 2) HP Scitex XL1200 3.2M (XLJet 3) HP Scitex XL1200 5M (XLJet 5) HP Scitex XL1500 2.2M (XLJet +2) HP Scitex XL1500 3.2M (XLJet +3) HP Scitex XL1500 5M (XLJet +5) HP Scitex XLJet 2 Premium HP Scitex XLJet 3 Premium HP Scitex XLJet 5 Premium HP Scitex XP2100 (Expedio 3200) HP Scitex XP2750 HP Scitex XP5300 (Expedio Revolution) Kornit Thunder 932 More Information Please Visit our website official store GAOLITOPRINTER, many best product Printers, Belts, Blades Pens andPad cutters, Boards,Bearings,Cappings, Cables, Connectors, Covers, Containers, Dampers, Electronics, Encoders, Fans, Fasteners, Filters, Fuses, Media Take Up Parts, Gears, Heaters, Holders, Lamps, Maintenance Kits, Mechanical Parts, Motors, O Rings, Power Supplies, Printheads, Pulleys , Pumps, Rollers, Sensors, Software, Tubes, Valves, Wipers
Product name: Flue Gas Desulfurization Pump Model: Flue Gas Desulfurization Pump Application: FGD pumps are sailed Pump Company in LC-T series slurry pump, the successful design manufactured on the basis of experience, in view of industrial flue gas Product overview Flue gas desulfurization pump Overview: FGD pumps are sailed Pump Company in LC-T series slurry pump, the successful design manufactured on the basis of experience, in view of industrial flue gas desulfurization pump characteristics, absorb with similar products within and outside the advanced technology, well-developed The new generation of series desulfurization pumps. Dedicated to the absorption tower circulating pump PH: 2.5 to 13 chlorine ion concentration: ¹60000ppm weight concentration:¹60% Medium temperature: ¹100C. Absorber circulation pump is large FGD key equipment, means there is high demand for its reliability and service life. FGD means more than half of the power consumed for driving the absorber circulation pump. Therefore, the circulating pump should have a high efficiency. Hydraulic design of the pump design and selection of materials flow components directly related to the efficiency of the pump operation, reliability and service life. We developed the absorber circulation pump, pump, pump cover over-current parts are made of 2605N material, impeller, wear plate is used Cr30A material. Hydraulic design of the pump, drawing the French company J S phase flow pump design and manufacturing technology, and the use of modern CAD, CFD technical correction. Second, the flue gas desulfurization pumps structural features: (1) The pump is single-stage single-suction centrifugal pumps, which form in practice has proved to be particularly suitable for FGD absorber circulation pumping device abrasive, corrosive slurry. (2) The impeller, wear plate without using mouth ring seal in the form, set the port ring will be slurry rapid wear, leading to the rapid decline in the efficiency of the pump. (3) having an axial adjustment structure, the impeller can be easily adjusted to maintain an axial gap between the impeller and the wear plate and the front cover, so as to maintain the high efficiency of the pump. It is always easiest to maintain and the most effective and efficient way to pump operation. (4) is arranged in the form of pump is "pull" structure. This allows the pump impeller during disassembly, mechanical seals and shaft assembly without removing the inlet and outlet pipes. (5) bearing with thin oil lubrication. Bearing mounted on a rubber ring secondary seal removable bearing box, to prevent dirt and water from entering. (6) The shaft is a large diameter, short axis head can reduce shaft deflection at work, thus extending seal life. Third, the flue gas desulfurization pump design advantages: Overview: back pull-out design of the entire rotor assembly can be pulled from the motor, easy to maintain, the pump can remain in the pipeline, without removing the motor. 1. Front pull-out design wear plates, impellers, mechanical seal can be disassembled inlet end 2. bearing bracket can be adjusted to improve the wear resistance 3. The bearing lubrication oil immersion 4. Pump: pump pressure and wear of sufficient size, materials used 2605N, weldable, volute tongue wear some special treatment, tangential flow channel outlet, the body set foot supporting way. 5. Wear plates: the part is mounted between the pump and imported materials Cr30A, this material has excellent resistance to abrasion and erosion resistance, overall performance, thereby extending the life of the pump and impeller. 6. Impeller: material Cr30A, not welded, taking into account the long run is more economical, since the bearing holder can be adjusted when the situation abrasive wheel, the wheel can be re-processed and prolong life. Front blade structure prevents large particles rushed impeller and wear plate gap, the leading blade and wear plate gap, reducing the media (in impeller and wear plate) flow rate, reducing wear, special blades wear process design, back blade design, reduced axial force, but also to block large particles, high pressure bearing design (simulation without axial force hydraulic model back under the blade), the 7. impeller vent design, can be discharged within the gaseous medium, to prevent dry running mechanical seals. 8. After the pump cover: materials used 2605N, weldable, wear usually occurs in the back of the blade area, the pump head is mounted on the bearing bracket, release stress and allow greater wear and prolong the service life of the pump cover bolts fixed bearing frame for easy disassembly without the card and damage to the pump when dismantling the mechanical seal. 9. A bearing body: the bearing body consists of two parts, the carrier and the bearing housing, the bearing housing and the adjusting screw can be adjusted by means of bolts, move horizontally within the carriage. This has the advantage: in the bearing housing to move the carriage (reprocessing size according impeller), but the inner and outer bearing ring without relative displacement, since no relative displacement, seals fully functional. When removing the lower part of the reservation on the base for easy removal, position accuracy, the installation will not occur mutual jamming of parts. 10. Mechanical seal: The mechanical seal is designed to Single seal cartridge structure, easy disassembly. Wash design there are two options: one, loaded wash water pipe fixed wash water; of the two, without a fixed wash water line, segmental wash. In the mechanical seal the work area, if the medium containing gas, mechanical seals would run dry, so the impeller is designed with vents, you can avoid large, dirty particle contact mechanical seal. Easy emptying drainage pump seal cavity volume, full lubrication, cooling sufficiently. Flue Gas Desulfurization Pump
Hx675 hydraulic comparator Product description Hx675 hydraulic comparator is made of hand pump, lead screw, relieve valve, shut-off valve, booster valve, oil tank and output interface. It provides required pressure with the whole system by hand pump and use the fine adjustment valve. It is easy to operate and labor-saving according to the hydraulic drive principle that big plunger pushing the small one. Functions Hx675 can supply pressure for calibrating pressure gauges, such as pressure (different pressure) transducers, precision pressure gauges, general pressure gauges and other pressure gauge. Characteristics It has secondary oil filter and a settler. The waste oil can be filtered by this duplex tank. Stainless steel and easy operation It calibrates 1 piece of gauge at one time Technology specification Pressure range(0~1600) bar, (0~2500)bar Stability0.05% f.S Pressure-transmitting mediaDiisooctyl sebacate Output interfaceM20¡ñ1.5 female Overall dimension(l¡ñw¡ñh)570mm¡ñ490mm¡ñ195mm Weight25kg
Qjr hot water submersible pump Flow: 10~500m3/h Lift: 15~405m Caliber: ?175~?400mm Power: 0.4-160kw Temperature: =140 ? Qualitycertificate: one year warranty and lifelong maintenance Qjr submersible hot water pump overview: This machine is used to deliver water. It has submersible motor and works under water. It is mainly used for farmland irrigation, water supply and water drainage in cities, factories and mines. Qjr series spring pump is widely used in special occasions like heating for warmth, physiotherapy, health care, earth energy utilization, etc. Its motor and pump are united into one. Its structure is simple, easy to install and disassemble, taking little floor space. It is easy to use and maintain, works safely and reliably, causing no pollution to water source. Qjr submersible hot water pump application range: 1. To collect hot water from boilers for secondary use 2. To collect water that leaks from heating pipelines in winter for secondary use 3. To collect cooling water in factories for secondary use (the pump should be submerged in water when working) 4. To deliver high temperature water through heat-supply system 5. To be used for heat-supply equipment maintenance 6. To supply hot water for bath center 7. To draw water from underground hotsprings, etc.
S series Centrifugal Pump S100-350 pump front lining is made of 1.4460 material, and Tobee s S100-350 pump fields of application including mechanical pulp production, secondary fibres, board machine, biological waste water treatment, sugar industry, flue gas desulphurization, bio-ethanol treatment, chemical pulp etc.