Particle Sensor

OPC-N3 PM2.5 Particle Sensor * PM1 , PM2.5 and PM10 * Reduced power standby mode * Capability to measure up to 2,000 µ g/m 3 * Onboard temperature and humidity sensor * SPI interface not included, order code 000-0SPI-00 OPC-N3 PM2.5 Particle Sensor Specifications * Particle range: 0.38 to 40 Spherical equivalent size * Size categorisation: 24 Number of software bins * Total flow rate (typical): 1.2 L/min * Sample flow rate (typical): 220 mL/min * Voltage range: 4.8 to 5.2 VDC * Temperature range: -10 to 50'C * Humidity range: 0 to 95 % rh non-condensing * Weight: < 105g

TF-LP01 Laser Particle Sensor Description TF-LP01 type laser particle sensor is a small module for detection of particles in the air with scattering principle. It features compact size, high accuracy, repeatablity and consistency, and strong resistance against interference. It adopts ultra-silent fan, and is able to response in real-time and collect data continuously. The sensors are 100% tested and calibrated in factory. TF-LP01 Laser Particle Sensor Features * High accuracy * Fast response * Compact in size TF-LP01 Laser Particle Sensor Applications * Air purifier, portable air quality detector, smart home, etc. TF-LP01 Laser Particle Sensor Technical index * Distinguishable particle: PM1.0, PM2.5, PM10 * Measurement range: 0~999 ug/m3 * Mass concentration resolution: 1 ug/m3 * Response time:

PSMU Series PM2.5/PM1.0 Particle Sensor Description PSMU Series, in which SAMYOUNG S & C's 20years knowledge and technology are concentrated, is a PM2.5/PM1.0 dedicated sensor with a radical improvement for detection capability at ultra-fine particle range - 0.3μm~1.0μm, which assures PM2.5/PM1.0 weight concentration values more accurate than conventional presumptive sensors. PSMU Series which performs higher accuracy along with improved sensitivity than conventional sensors provides reliable information to users enabling more accurate and sophisticated control in the applications such as air purifiers, air conditioners and air quality measuring devices. PSMU Series PM2.5/PM1.0 Particle Sensor Features * Detectable Particle Size - 0.3m Real-time PM2.5/PM1.0 * UART Output - g/m3 * Excellent Accuracy * High Linearity and Uniformity * Market-proven Reliability and Durability PSMU Series PM2.5/PM1.0 Particle Sensor Applications * Air Solution Products (Air Purifier, Air Conditioner and etc.) * HVAC Control System * Smart IAQ Device * Outdoor Particle Sensing Device PSMU Series PM2.5/PM1.0 Particle Sensor Product Specifications (Ta=25'C) * Detectable Size: m * Effective Range: 0 ~ 500 g/m3 * Maximum Range: 0 ~ 900g/m3 * Response Time: 1sec * Supply Voltage: DC 5.0V±10% Ripple 30mV or Less * Current Consumption: Typ. 85mA * Output Signal: UART * Operating Temperature: -10 ~ 65'C * Operating Humidity:

TF-LP01 Laser PM2.5 Sensor Description TF-LP01 type laser particle sensor is a small module for detection of particles in the air with scattering principle. It features compact size, high accuracy, repeatablity and consistency, and strong resistance against interference. It adopts ultra-silent fan, and is able to response in real-time and collect data continuously. The sensors are 100% tested and calibrated in factory. TF-LP01 Laser PM2.5 Sensor Features * High accuracy * Fast response * Compact in size TF-LP01 Laser PM2.5 Sensor Applications * Air purifier, portable air quality detector, smart home, etc. TF-LP01 Laser PM2.5 Sensor Technical index * Distinguishable particle: PM1.0, PM2.5, PM10 * Measurement range: 0~999 ug/m3 * Mass concentration resolution: 1 ug/m3 * Response time:

PSML Series PM2.5 / PM1.0 Particle Sensor Description PSML Series, in which SAMYOUNG S & C's 20 years knowledge and technology are concentrated, is a PM2.5/PM1.0 dedicated sensor with a radical improvement for detection capability at ultra-fine particle range - 0.3μm ~ 1.0μm, which enables classifying PM2.5/PM1.0 level more precise than existing sensors. PSML Series which performs higher accuracy along with improved sensitivity than conventional sensors provides reliable information to users enabling more accurate and sophisticated control in the applications such as air purifiers, air conditioners and air quality measuring devices. PSML Series PM2.5 / PM1.0 Particle Sensor Features * Minimum Detectable Particle Size - 0.3μm * PWM Output (Low Pulse Occupancy) * Enhanced Accuracy (LPO) * Precise PM2.5/PM1.0 Level Classification * High Linearity and Uniformity * Market-proven Reliability and Durability * Pin-to-Pin Compatibility with Existing Sensors PSML Series PM2.5 / PM1.0 Particle Sensor Applications * Air Solution Products (Air Purifier, Air Conditioner and etc.) * HVAC Control System * Smart IAQ Device * Outdoor Particle Sensing Device

OPC-N2 Alphasense PM2.5 Particle Sensor Description Alphasense is dedicated to supplying sensors for air quality networks. Increased awareness of the health danger from particulates has raised significantly the importance of monitoring PM. Our Optical Particle Monitor OPC-N2 measures PM1, PM2.5 and PM10, augmenting our range of gas and VOC sensors for indoor and urban air quality monitoring. The OPC-N2 originated from research at the Centre for Atmospheric and Instrumentation Research, University of Hertfordshire and has subsequently been developed and refined with five years of Alphasense and UoH collaboration, including the capture of more than 150 million readings at Heathrow airport. The OPC-N2 measures particles from 0.38 micron to 17 micron diameter accurately, repeatedly, and with minimal maintenance using the patented pump-less design. A proven technology, the OPC-N2 provides both PM readings and real time particle size histograms, competing in performance with existing analytical units but at a fraction of the cost. * Particle range: 0.38 to 17 Spherical equivalent size (based on RI of 1.5) * Temperature range: -10 to 50'C * Humidity range: 0 to 99 % rh (continuous) (non-condensing) * Weight : < 105 g

Optical Particle Sensor for PM1 PM2.5 and PM10 OPC-N2 Model Number:OPC-N2 1.General Features * Micro USB socket allows on-site firmware updates * Onboard data logging using optional 16GB SD card: 12 months’ capture * SPI control of fan and laser for lowest power * Factory set: particle size particle density/Total RI bin weighting for respirable profiling Optical Particle Sensor for PM1 PM2.5 and PM10 OPC-N2Optical Particle Sensor for PM1 PM2.5 and PM10 OPC-N2 Optical Particle Sensor for PM1 PM2.5 and PM10 OPC-N2

Supplier: Laser dust sensor, pm2.5 sensor, infrared dust sensor, dust sensor, air quality sensor, dust particle sensor,pm2.5 sensor module
Buyer: Air purifier manufacturer,sweeping robot manufacturer,pm2.5 monitoring

LD15 Laser PM2.5 Dust Sensor Model Product Details Product overview Particle sensor pm2.5 LD15 is a high-precision particle sensor based on the theory of laser MIE scattering. It can continuously collect and calculate the number of suspended particles with different particle sizes in air per unit volume, that is the concentration distribution of particles, and then convert to mass concentration. And output in the form of universal digital interface. The sensor can be embedded with various instruments related to the concentration of suspended particulates in the air or environmental improvement equipments to provide timely and accurate concentration data. LD15 Laser PM2.5 Dust Sensor Model Working principle laser sensor LD15 adopts MIE spherical particle scattering principle, that is, laser sensor uses laser to irradiate suspended particulate matter in the air to produce light scattering, photoelectric detector collects scattering light intensity in a certain angle range, the scattering light intensity will be linearly converted to voltage, and then sent to data processing system, the data processing system take the principle of Michaelis scattering theory to deal with the datas, then the equivalent particle size and the number of particles with different particle sizes per unit volume are obtained. Main feature 1 High measure accuracy up to 0.1�¼m 2 Zero error alarm rate 3 Real-time response and support for continuous data collecting 4 Minimum resolution particle size 0.1�¼m 5 Electronic controlled devices lifetime > 8 years, average working time > 5 years. 6 Wide range of application, no need for air duct design, compatible with multi-protocol output 7 light and thin design, suitable for detectors, wearerable equipments, air purifiers, fresh air systems, etc. 8 Six-sided shielding combined the software anti-jamming algorithm, with higher anti-jamming performance Typically Application (1) Particle monitor instruments (2) Environmental improvement equipments Product Specification particle sensor pm2.5 Module Product Specification Note 1 : Maximum range means that this sensor ensures that the maximum output value of pm2.5 standard value is not less than 1000 u g / m3. when the data is > 1000 u g / m3. pls take the actual measure value Note 2 : the consistency data of the particle concentration is the data in the appendix -Measuring temperpture condition is 20,humidity condition is 50% .