With the support of our expert, our company is dedicated exporter of replaceable sleeve stabilizer in beijing, beijing, china. In order to meet the needs of different drilling condition, different types of stabilizers is equipped on the housing of the driving shaft : fixed and replaceable type available. Clients can avail this replaceable sleeve stabilizer at industry leading prices from us.
Stabilizers are fairly short subs which have blades attached to external surface. By providing support for the BHA (Bottom Hole Assembly) at certain points they can be used to control the trajectory of the well. The blades can be either straight or spiral in shape. Spiral blades can give 360�¯�¿�½?�?�° contact with the borehole. Orchid Energy Co can provide string stabilizer and near bit stabilizer, straight integral blade stabilizer(IBS),spiral integral blade stabilizer(IBS), replaceable sleeve stabilizer, non-rotating stabilizer, and non magnetic stabilizers etc. Stabilizers are manufactured from 4145H alloy steel bar or forgings, quenched and tempered to 285-341 Brinell hardness; Hard facing types are HF1000, HF2000, HF3000, HF4000, HF5000. All above products are manufactured according to API Spec 7-1 standard. Options Available: straight integral blade stabilizer, spiral integral blade stabilizer, replaceable sleeve stabilizer, non-rotating stabilizer or non magnetic stabilizers; 4145H Alloy steel, Non-magnetic steel; String Type stabilizer, Near Bit Type stabilizer;
API 7-1 IB String Stabilizer with Non-magnetic Body Product Description The stabilizer with back reaming is selecting the appropriate location and through special processing method to array few teeth as a cutting edge. In this way, this stabilizer can be played cutting when the process of drilling and pull out. During drilling process, forward and backward redressing can be played the role to repair and maintain the wall of well, making trajectory of borehole as far as possible, more often than not leading to drilling difficulty because of hole shrinkage, and so on, at the moment, the forward and backward redressing of this stabilizer can be played cutting, to eliminate hole shrinkage phenomenon, thus saving time and costs for drilling. Features (1). Sizes and configurations can be manufactured to operators requirements, including blade sizes, connections, and types of material. (2). All stabilizers connections can be configured as box Ã? box, as pin Ã? box, or as the operator requires. (3). Welded straight blade for drilling soft formations. (4). Sleeve type allowing less equipment inventory in remote locations. (5). Integral spiral blade allowing 3600 hole contact for use in hard rock formations. (6). Nonmagnetic stabilizers for applications requiring magnetic isolation.
Lake Petroleum supplies a complete line of downhole drilling stabilizers to increase rate of penetration and control hole deviation problems. All these stabilizers (including drill bit type, drill string type, spiral bladeilling, straight blade, integral blade, welded blade, sleeve-type, and stainless steel nonmagnetic types) are designed to meet the strictest quality control and quality assurance standards (API SPEC.). All alloy stabilizers are manufactured from AISI 4145H modified heat-treated steel for a wide variety of configurations and hole sizes.
Lake Petroleum supplies a complete line of downhole drilling stabilizers to increase rate of penetration and control hole deviation problems. All these stabilizers (including drill bit type, drill string type, spiral blade, straight blade, integral blade, welded blade, sleeve-type, and stainless steel nonmagnetic types) are designed to meet the strictest quality control and quality assurance standards (API SPEC.). All alloy stabilizers are manufactured from AISI 4145H modified heat-treated steel for a wide variety of configurations and hole sizes.
Supplier: Pin thread protector, protector fixed on crossover, crossover thread protector), pump seating nipple, crossovers, connector crossovers, landing nipples, flow couplings, icross over flow control couplings, double pin sub, connector double pin sub, pup joint sets, straight od sub, test plugs, test cups, wear prevention saver subs(wear subs), saver subs with rubber protector, inflatable casting thread protector, side entry subs (welded),, tubing pup joints, back-off sub, stapping guide, bumper sub, kelly saver subs, universal bottom hole orientation (ubho) sub, blast joint, perforated sub, top drive saver sub(top sub), casing swages, stage collars, casing drifts, circulating head, bit sub, swivel joint, ported blind box, rotary subs, knuckle joint, safety sub, wash pipe, lift nubbins, lifting plug, mt39 thread protector, bent sub, slip grip, non-rotating stabilizer, integral straight blade stabilizer, replaceable sleeve stabilizer
Control transformers are mostly used for industrial applications where electromagnetic devices are used such as solenoids, contactors and relays. Also control transformers can be utilized in industrial electrical applications for regulating voltages through electrical and electronic circuits. We make wide range of control transformers with E-I Lamination core and with various termination styles to suit for customer applications either single phase or Two phase or Three phase as per customer requirements . We provide termination with lead wires, terminal blocks, Din rails, solder points, screws, and terminal connectors. We can provide EI transformers up to 10kVA. We can provide with electrostatic shields, Thermal protector switches and circuit breakers. Features Insulation Class as per UL/IS (A,B,F,H) C and L clamps are provided according to specifications. High quality Terminal blocks are provided. High quality XLPE leads wires used. Low loss EI stampings used for high efficiency. High quality hardware used. Glass filled Nylon Bobbins used. Flame retardant insulation tapes used inside. High quality insulation used. Fiber glass sleeves used for external wires. Compact in space Cost effective Particularly well suited for resin cast Less in weight UL Approved Standards We follow IS11171. Compatible to IEC61558-1 We can provide UL 5085-1 and UL 5085-2 Applications Used in converters, inverters, instruments and power supplies. Used in many types of machines and accessories. Used in electronic sensing circuits. Used in voltage stabilizers. Used in power conditioning equipments. Used in Rectified Modules
Supplier: Knee braces, waist brace, knee sleeves, knee pads, ankle pads, ankle sleeves, elbow sleeves, wristbands, hand sleeve, thumb stabilizer, back brace, neckbrace, medical gear
Supplier: Automobile engine replacement parts like cylinder liner and sleeves, crankshaft, camshaft, connecting rod, cy. head, valvee guide, gears, transmission parts
•Waterproof and it floats! •KELILONG’s exclusive cartridge pH and ORP electrode •Extendable cloth pH junction •Automatic Temperature Compensation PH-099 is a waterproof pH, ORP and temperature meter. The housing has been completely sealed against humidity and designed to float. All pH readings are automatically temperature compensated(ATC). Measurements are highly accurate with a unique stability indicator right on the LCD. The pH electrode is replaceable and can be easily replaced by the user.