Polyferric Sulfate(Pfs)

Supplier: Polyaluminium chloride (aluminium chlorohydrate) PAC, polyferric sulfate(PFS), polyacrylamide(PAM)

Pac feathures 1.Using pac as flocculant, the speed of flocs forming and settling is quick. Flocs formed is easy to filter 2.Comparing to aluminium sulfate flocculant, the quality of water treated with pac is better; the total cost reduced by 15%~30%, and the solubility is better. 3.It can be applied to water with broad ph range. The floc function valid in water of ph 5 to ph 9 4.Comparing to inorganic flocculants, pac is suitable for water of broad temperature, and is functional in low temperature water. It reduces less basicity less, so less or no basifier needed. 5.There is fewer salts in water treated with pac, this is good for high purity water purifying and ion-exchange treatment 6.The corrosivity of pac is lower, easy to transfer, handle and operate. Pac applications 1.Drinking water and sanitary sewage. 2.Industrial water, industrial waste water, mine and water for oilfield injection, chemical waste water in industry of paper-making, metallurgy, washed coal and leather. 3.Industry and makes waste water recyclable: paper-making glue, printing and dying, concrete hardener, precision casting hardener, glycerine refinement, crease-resistant for fabric, medicine, cosmetics and etc. 4.Oil-water separation and has good effects in the oil refining industry.

Pam applications: •anionic pam: it is widely used in waste water treatment of chemical industry, municipal sewage treatment, such as coal washing, mineral processing, metallurgy, iron and steel industry and electronic industry. It is also used in oil industry to enhance oil recovery which is widely used. In addition, it can be used as paper additives and textile pulp agent. •cationic pam: it is very efficient in usage and has high dehydration rate. It is used for the waste water treatment in alcohol factory, monosodium glutamate factory, sugar factory, beverage factory, tanneries, dyeing and other fields. It has a better effect to be used together with inorganic coagulant in particular. It can be used as paper additives as well. •non-ionic pam: it is the most appropriate to use npam, when the sewage is acidic. It is also used as agents for the textile pulp, paper chemicals, water shutoff agent, and etc.Because of its non-ionic functional group, ph value and salts have a little influence on npam’s flocculation. In the neutral or alkaline conditions, the flocculation effect is not as good as apam, but better than apam in acidic conditions. •amphoteric pam: it can be used in a wide range of ph value. It can also be used in ore leaching with strong acid or extract valuable metals from the acid catalyst with metals. Amphoteric ion is not the mixing of anionic and cationic. It is applied to all kinds of waste water treatment like oil contamination, organic sewage, inorganic sewage, complex sewage with frequently water quality changing and sludge dewatering. It is also used as paper additives, oilfield water shutoff agent, and etc.

1.Products Description Chemicals Product Polymeric Ferric Sulfate PFS Polyferric sulfate (PFS) is an inorganic polymer coagulant with superior performance. Its morphological properties are yellowish, amorphous, powdery solid, and it is easily soluble in water. 10% (mass) of aqueous solution is reddish-brown transparent solution with hygroscopicity. 2.Specification Product name ---------- Polyferric sulfate Appearance ---------- light yellow powder Fe3+ Content (%)------ 21%Min Restore Substances ( Fe2+) Content% ---1.0% Max PH(1% water solution)----2.0-3.0 Insoluble Substances (%) -----1.0 Max 3.Application a.PFS is used in drinking water treatment Polyferric sulfate can effectively reduce metal aluminum in drinking water, and can also remove bacteria, turbidity and chromaticity caused by corrosion of water supply pipes. b.PFS is used in dyeing wastewater treatment Polyferric sulfate can replace the traditional molecular iron salt and aluminum salt coagulant. Compared with traditional coagulant, the amount of polyferric sulfate is smaller and the chroma removal rate is higher. c.PFS is used in Electroplating wastewater Polyferric sulfate can be used as a coagulant and rutting agent in electroplating wastewater treatment. It is difficult for the complex to directly react with a coagulant such as polyaluminum chloride d.PFS is used in papermaking wastewater treatment Polyferric sulfate can be used as a coagulant instead of polyaluminium chloride, aluminum sulfate, etc. It can also be used for dewatering of paper sludge, which can achieve rapid flocculation and sedimentation. 4.Packing & Delivery Packing method: 25kg plastic woven bag lined with polyethylene bag or as customer's

Supplier: Polyaluminium chloride (poly aluminium chloride or pac) like industrial grade (yellow powder), drinking grade, high pure grade(white powder), polyferric sulfate (pfs)( yellowish brown powder. ), polyacrylamide (pam), anionic pam, cationic pam, non ionic pam, amphoteric pam.

Product and Description :polyaluminium chloride (PAC) The product is high-efficient ,cheap and nontoxic inorganic high molecular compound .It's easily soluble in water .In the hydrolytic process, it is accompanied by the chemical processes such as electrochemistry ,coagulation ,absorption and precipitation . The product has the features including wide applicable range of PH value ,large granule ,and quick speed in sedimentation .It's widely used in treating the domestic drinking water, domestic sewage and industrial waste water . Production Process: The plate and frame filter press is a plate and frame filter press. The reacted liquid PAC is filtered through the plate and frame machine to remove impurities, insolubles, sediments, etc. The processed liquid has a higher purity, and the dried product has a golden color and dry particles Uniformity, high content, extremely low water insoluble matter. The products processed by this process can be used as drinking water-grade water treatment agents, and can also be called drinking water-grade polyaluminum chloride. Application: PAC is a kind of inorganic macromolecule flocculant. Through the hydroxyl ion bridging function and the polyvalent anion polymeric function, it produces large molecular and high electricity inorganic macromolecule. It adapts a wide pH range of 5.0~9.0, and the best is between 6.5~7.6. 1. Purification of urban water supply and drainage 2. Industrial water supply purification. 3. Urban sewage treatment. 4. Various industrial wastewater treatment 5. Sizing for paper making. 6. Sugar liquid refined. 7. Cast molding. 8. The cloth is anti-wrinkle. 9. Catalyst carrier. 10. Medicine refining 11. Cement quick-setting. 12. Cosmetic raw materials. Packing, Storage and Transportation: Package in 25kg P. P woven bag or paper-plastic bags with PE lined, or as per buyer's instructions. In storage and transportation, pay attention to heatproof and moisture proof. The powdery. Product will be damped to be caked and will be poor in solubility if exposure to air for long time.

The colors of polyaluminum chloride are generally white, yellow, and tan. Different colors of polyaluminum chloride are also quite different in application and production technology. Our factory produces both types of polyaluminum chloride. Spray drying requires higher quality raw materials during the production process, and the production cost is high and increased a lot. The relative cost of drum drying is lower, The selection of raw materials does not need to be too strict. Our factory produces industrial-grade PAC, drinking-grade PAC, and high-purity PAC to meet the needs of wastewater treatment in different fields. CAS No.: 1327-41-9 Application: 1. Purification of urban water supply and drainage 2. Industrial water supply purification. 3. Urban sewage treatment. 4. Various industrial wastewater treatment 5. Sizing for paper making. 6. Sugar liquid refined. 7. Cast molding. 8. The cloth is anti-wrinkle. 9. Catalyst carrier. 10. Medicine refining 11. Cement quick-setting. 12. Cosmetic raw materials. Package: 25 kg/bag(PP woven bag with PE inside), or according to customer requirements. Cautions: 1) Water treatment chemicals of different manufacturers or different brands cannot be mixed and cannot be mixed with other chemicals. 2) The original solution and diluent are slightly corrosive, but lower than other inorganic coagulants. 3) Effective storage period of the product: half a year for liquid and one year for solid. The solid product can still be used after being damp. 4) PAC is currently a widely used flocculant, but customers must purchase PAC products from their own actual fields. Different fields require different levels of PAC.

Poly Ferric Sulfate (PFS) is a complex ferric material. The molecular formula is the [Fe2 (OH)n (SO4)3-N/2]m, n＞2; m=f (n). There are a lot of complex ferrous ion ([Fe2 (OH)3]3+, [Fe(H2O)6]3+, [Fe3(OH)3]6+) in its water solution. So it is a good coagulant which has strong flocculation and has a good coagulation. Its chemical structure is a solid network polymer which has a multinuclear complex ion. It can be easy to hydrolyze in water and can produce the highly efficient multinuclear hydroxyl complex positive ion. In the process of water treatment, Polymer ferrous sulfate has a good ability to neutralize surface electric charge of suspended substances, and linking suspended particle. PE drum.

Description High-grade barium sulfate specially processed use as a drilling fluid weighting additive. BARITE meets the API Specification 13A, Section 2 requirement for a drilling fluid BARITE Recommended Use Primarily for mud rotary drilling, barite increases mud density while maintaining low solids to help control formation pressures Advantages 1. High specific gravity; raises drilling fluid density with minimum solids 2. Controls formation pressure, stabilizes the borehole 3. Cost-effective, non-toxic, and chemically inert Properties 4. Specific Gravity: 4.2 (minimum) 5. Moisture Content: Less than 1% 6. Bulk Density: 150 lbs/ft3 7. Mineral Content: 94% barium sulfate Mixing and application Add BARITE through high shear mixer or jet hopper so that entire circulating volume is at uniform weight. To control artesian flow at surface, keep the hole full at all times with weighted mud. Starting with 100 gallons of mud at a weight of 9 lbs/gal, 134 lbs of BARITE will raise the weight to 10 lbs/gal and increase the volume to 104 gallons. Packaging 1500 kgs Jumbo bags, one bag per pallet. All are of F.I.B.C. Class, SINGLE TRIP, all weather ( 04 PF Inner Bag & 05 PP Outer Bag )