LC 230 is a strong descaler with a special blend of
acids, corrosion inhibitors, emulsifiers & dispersing
agents. It effectively removes rust, oxides of metals,
scale and soil from metal and concrete surfaces. It’s
dissolving action on rust, silica and scale is quick and
thorough. Its acid formulation dissolves lime, scale and
rust right down to the base metal or concrete with the
selective inhibitor protecting metal surfaces. Not for
materials like glazed tiles and glass.
Application
Brush or spray on surfaces. Clean surface free from excess rust, soil and
dirt. Apply LC 230. Allow to stand for 10-20 minutes, then wipe off with
water. Surface may require repainting if necessary.
Dosage
For descaling purposes, dilute one part LC 230 with up to 20-100 parts of
water depending on the thickness scales. Allow standing for several hours
and/or re-circulate using pumps. Flush with water until all the scale is
removed. Repeat if scale is still present; check pH and maintain below 1.5
during circulation for control. Use LifeChem LC 240 for neutralizing the spent
solution before disposal. Contact Field Chemist for further information.
Handling & Precaution
Irritating to eyes and skin. If contact with skin occurs, wash immediately
with plenty of water. In case of eye contact irrigate thoroughly with water for
at least 15 minutes. Seek medical advice.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
LC 232 is a very strong concentrated descaler, specifically designed to remove silica based scales and other stubborn scales. It is a special blend of volatile acids, corrosion inhibitors & dispersing agents. It effectively removes stubborn silica scale and soil of silicate/phosphate nature from metal and other surfaces. LC 232 is an excellent additive for the LC 231 & LC 233 for additional effectiveness against silica based scales and effectively bring down cost by reducing the amount of other descalers. Its special formulation dissolves scale and rust deep down with the selective inhibitors protecting metal surfaces. Application Spray or brush on surfaces. Clean surface free from rust, soil and dirt. Apply LC 232. Allow to stand for 2-5 minutes, scrub thoroughly and re-apply. Repeat and then flush off with water. Flush with water until all scale is removed. Add with other descaler like LC 231 & LC 233 for stubborn and difficult to remove scales. For best results use circulation or dipping method use of passivating agent like LC 252 or LC 253 is essential. Make test strip before use. NOT TO BE USED ON GLASS/SILICATE BASED SURFACES. Dosage Dilute one part of LC 232 with up to 10 parts of water or depending on the thickness of scales. Handling & Precaution Irritating to eyes and skin. Protective clothing and eye protection should be provided and worn. After contact with skin, wash immediately with plenty of water. In case of eye contact irrigate thoroughly with water for at least 15 minutes. Seek medical advice. Packaging Available in pail of 20 lt.. Can also be custom packaged.
Application LC 231 is a special blend of volatile acids, corrosion inhibitors & dispersing agents. It effectively removes scale and soil of carbonate nature from metal and other surfaces. LC 231 is an excellent additive for the LC 233 for the initial removal of the carbonate based scale and effectively bring down cost by reducing the amount of other descalers. Its acid formulation dissolves lime scale and rust deep down with the selective inhibitors protecting metal surfaces. Application Spray or brush on surfaces. Clean surface free from rust, soil and dirt. Apply LC 231. Allow to stand for 2-5 minutes, scrub thoroughly and re-apply. Repeat and then flush off with water. Flush with water until all scale is removed. Add with other descaler like LC 232 & LC 233 for stubborn and difficult to remove scales. Cannot be used alone. Dosage Dilute one part of LC 231 with up to 10 parts of water depending on the thickness of scales. Handling & Precaution Irritating to eyes and skin. Protective clothing and eye protection should be provided and worn. After contact with skin, wash immediately with plenty of water. In case of eye contact irrigate thoroughly with water for at least 15 minutes. Seek medical advice. Packaging Available in pail of 20 lt.. Can also be custom packaged.
LC 233 is a special blend of non-volatile acids, corrosion inhibitors, emulsifiers & dispersing agents. Effectively removes rust, scale and soil from metal and concrete surfaces. Application May be sprayed or brushed on surfaces. Clean surface free from rust, soil and dirt. Apply LC 233. Allow to stand for 10 - 20 minutes, then wipe off with water. Dry surface can be repainted if desired for longer protection Dosage For descaling of condensers, dilute one part of LC 233 with upto 10 parts of water depending on the thickness of scales. Allow to stand for several hours. Flush with water until all scale are removed from condensers. Handling & Precaution Irritating to eyes and skin. After contact with skin wash immediately with plenty of water. In case of eye contact irrigate thoroughly with water for at least 15 minutes. Seek medical advice. Packaging Available in pail of 20 lt.. Can also be custom packaged.
Lc 235 is designed specially for use in systems where The use of acidic descalers are not recommended. Lc 235 may be re-circulated by means of a high volume Pump for the removal of scale. Lc 235 can be used Safely on to copper & brass surfaces besides being very Effective in steel system. Application Lc 235 may be soaked overnight and re-circulated. When scale is present, The tubes should first scraped out to remove as much as possible and then Flushed out with a hose. Dosage Circulate a 10% solution (10 gallons of lc 235 for every 100 gallons of Water.) for a period of four to six hours depending on the scale thickness. Solution may be heated for effectiveness by steaming. The system should Then be drained and inspected. If more scale remains, repeat the process. When the cleaning process is complete, flush with clean water and place it Back in service. For storing / stand by system use lc 253 or lc 252. Handling & precaution This product is alkaline and should be handled with care to prevent personal Injury. Protective clothing, gloves and eye protection should be worn. In case Of skin contact, immediately flush thoroughly with plenty of clean water. In Case of eye contact, flush with copious amounts of water for 15 minutes and Consult a physician. Refer to material safety data sheet for more specific Procedures and directions. Packaging Available in pail of 20 lt.. Can also be custom packaged.
Lc 239 is a very strong descaler for destroying the most Difficult scales. It effectively removes difficult scales, rust, Oxides of metals, silica scale and hard soil from metal and Other surfaces. It’s dissolving action is quick and thorough. Most cost effective descaler when combined with lc 230, Lc 233, lc 232 and lc 231. Do not use on materials like Glazed tiles and glass. Must be used after dilution only. Application Dilute and blend with other descalers as necessary before dipping, brushing or Spraying on surfaces. Clean surface free from excess rust, soil and dirt. Apply lc 239. Allow to stand for 10-20 minutes, then flush off with water. Surface may Require repainting if necessary. Recommended to use lc 240 for neutralization And lc 252 for passivating the native surface on ferrous metals. Avoid contact With unwanted surfaces. Dosage For descaling purposes, dilute one part lc 239 with up to 20-100 parts of water Depending on the type and thickness of scale and method of application. Allow to Stand / circulate for several hours or as necessary. Flush with water until all the Scale is removed. Repeat if scale is still present, check ph during application for Control. Contact field chemist for further information. Do not use above 2% with Non-chemical pumps for circulation Handling & precaution Strongly acidic. Irritating to eyes and skin. After contact with skin wash Immediately with plenty of water. In case of eye contact irrigate thoroughly with Water for at least 15 minutes. Seek medical advice. Avoid direct contact with Glass, tiles and other such surfaces. Use adequate protective measures during Use. Packaging Available in pail of 20 lt. Can also be custom packaged.
Lc 270 is a water based general purpose cleaner to Penetrate, emulsify and disperse oil, grease, dirt and Grime and other types of soils from a variety of hard Surfaces. Ideal for cleaning walls, floors, desks, light Fixtures, automobiles, painted woodwork. Also can be Used on metal surfaces such as stainless steel, Aluminum, cooper and brass. Application Spray, mop, brush wipe, dip method are recommended. Use for Cleaning walls, floors, desks, light fixtures, automobile, painted Wood work. Dosage Dilute with ratio of 1 : 10 with water depending on the dirt Thickness Handling & precaution Avoid spills on eyes. Should avoid unnecessary contact with Skin. Can irritate when exposed for a longer period. Harmful if Swallowed. Packaging Available in pail of 20 lt. Can also be custom packaged.
LC 202 is a water based general purpose cleaner to penetrate, emulsify and disperse oil, grease, dirt and grime and other types of soils from a variety of hard surfaces. Ideal for cleaning walls, floors, desks, light fixtures, automobiles, painted woodwork. Also can be used on metal surfaces such as stainless steel, aluminum, cooper and brass. Application Spray, mop, brush wipe, dip method are recommended. Use for cleaning walls, floors, desks, light fixtures, automobile, painted wood work. Dosage Dilute with ratio of 1 : 15 (min) up to 1 : 200 with water depending on the dirt thickness & type of the surfaces Handling & Precaution Avoid spills on eyes. Should avoid unnecessary contact with skin. Can irritate when exposed for a longer period. Harmful if swallowed. Packaging Available in pail of 20 lt.. Can also be custom packaged.
Lc 202 is a water based general purpose cleaner to Penetrate, emulsify and disperse oil, grease, dirt and grime And other types of soils from a variety of hard surfaces. Ideal for cleaning walls, floors, desks, light fixtures, Automobiles, painted woodwork. Also can be used on metal Surfaces such as stainless steel, aluminum, cooper and Brass. Application Spray, mop, brush wipe, dip method are recommended. Use for cleaning Walls, floors, desks, light fixtures, automobile, painted wood work. Dosage Dilute with ratio of 1 : 15 (min) up to 1 : 200 with water depending on the dirt Thickness & type of the surfaces Handling & precaution Avoid spills on eyes. Should avoid unnecessary contact with skin. Can Irritate when exposed for a longer period. Harmful if swallowed. Packaging Available in pail of 20 lt.. Can also be custom packaged.
Sulfamic Acid 99.5% Sulfamic Acid is an efficient descaling agent and is used for cleaning of a variety of industrial equipment and domestic appliances. Sulfamic descalant can be used for removing water and process scales from industrial equipment, broadly finding utilization in chemical and fertilizer industry, dairy and food equipment, marine equipment, sugar industry, etc. Key Features and Benefits Does not produce obnoxious fumes like hydrochloric acid Effective even at lower use concentration Broad spectrum range of application