Pellet Plant

Sawdust burner product feature 1.Easy to operate and use, the machine adopts plc control panel which can realize small fire-middle fire-big fire. Customize electrical components according to customers requirements, there are domestic components and imported components available, we will offer free replace parts within one year because of quality problem. 2.The combustion furnace adopts 3-layer thermal insulation, the inner furnace adopts high aluminum refractory , anti-souring and high temperature resistance. Outside of the furnace, it uses water cooling system, make sure the furnace have long usage life, and operation more stable. 3.Pyrolysis and gasification through negative pressure, secondary combustion, smoke treatment system, eliminate the secondary pollution completely, up to european emission standard. 4.The product working principle adopts ultra-low nitrogen combustion technology, multiple air increasing, high temperature pyrolysis, semi-gasification suspension combustion, use heat convection and radiation at the same time, combustion last for more than 2 seconds, high-speed combustion and no dead corner. 5.High thermal conversion efficiency, heat efficiency can reach 90%-95% generally, stable continuous operation, easy to operate and maintenance. 6.Well sealing measures and negative pressure furnace, ensure no gas leakage. Application scope 1.Fuel gas/oil/coal boiler industry (steam boiler, thermal oil furnace, hot water boiler) 2.Smelting industry (aluminum melting furnace, reverberatory furnace) 3.Drying industry (food drying, sawdust/wood chips/biomass drying) 4.Spray coating industry (metal spraying, electroplating heating) 5.Greenhouse, building industry (asphalt heating) Simple equipment structure, widely raw material application, operation continuous, be suitable for any kind of industry energy required equipment. -

Gasification Power Plant PRODUCT FEATURE 1.The gasifier uses fixed bed down-draft type, produce syn-gas continuous and stably with low tar content, it can generate electricity continuous. 2.Easy to use and operate, use Siemens PLC touch screen control panel to realize automatic control and semi-automatic control. Independent operation room, adjust parameter directly by controlling LCD touch screen. Then gen set will operate with separately control system. 3.Due to MSW gasification process adopts pyrolysis and accurate control in different stage, so it can reach specified flue gas standard. 4.Due to low temperature gasification combustion(gasifier furnace) under anaerobic condition and low temperature gasifier and combustion, only producing combustible gas, particulate matter emission is precious little. 5.Finish low temperature oxidation process in high temperature combustion chamber (combustion furnace), not producing harmful gas secondary pollution. 6.Due to combustion process is c omplete, the ash is completely non- pollution matter. 7.The removal rate of organic is over 90%, so it reduce the follow-up treatment cost greatly. 8.All kinds of waste with different composition can burn stably at the same time. 9.Safety separation combustion, restrict dioxin and other harmful matter output. 10.Operation 24 hours/day continuous. 11.Waste need to sort out, and improved operation efficency, ensure the safety of working environment. 12.Haiqi gasification system is fully closed, it is neat and beautiful look at site, no harmful to operation people. Automatic fuzzy control, easy to operate. All fuel feeding, slag discharge door, overhaul hole use soft seal, On the top of furnace has a seal cover to avoid gas leakage. The sealing of furnace is good, realizing good effect of oxygen controlling and pyrolysis. 13.When pyrolysis gas spontaneous combustion take place, then it enter into a process of spontaneous combustion, auxiliary combustion device will stop automatically. The whole process of spontaneous combustion is over 90%, greatly lower running cost. Realized resource utilization of waste thermal energy. Flue gas emission is no harmful and total CO2 emission is reduced. Gen set: the gas from biomass and MSW is syn-gas, the components of the syn-gas is special, the impurity content is too much, so Haiqi company adopts large cylinder, lower rotate speed internal combustion engine, generate electricity stably. APPLICATION SCOPE Use all kinds of agriculture waste, city waste and industry waste to generate electricity, supply to factory or connect with national grid. -

We can produce and sell biomass gasifier, such as city waste plastic gasifier, garbage gasifier, MSW gasifier Gasifier PRODUCT FEATURE 1. The gasifier uses fixed bed down-draft type, produce syn-gas continuous and stably with low tar content, it can generate electricity continuous. 2. Easy to use and operate, use Siemens PLC touch screen control panel to realize automatic control and semi-automatic control. Independent operation room, adjust parameter directly by controlling LCD touch screen. Then gen set will operate with separately control system. 3. Due to MSW gasification process adopts pyrolysis and accurate control in different stage, so it can reach specified flue gas standard. 4. Due to low temperature gasification combustion(gasifier furnace) under anaerobic condition and low temperature gasifier and combustion, only producing combustible gas, particulate matter emission is precious little. 5. Finish low temperature oxidation process in high temperature combustion cha ber (combustion furnace), not producing harmful gas secondary pollution. 6. Due to combustion process is complete, the ash is completely non- pollution matter. 7. The removal rate of organic is over 90%, so it reduce the follow-up treatment cost greatly. 8. All kinds of waste with different composition can burn stably at the same time. 9. Safety separation combustion, restrict dioxin and other harmful matter output. 10. Operation 24 hours/day continuous. 11. Waste need to sort out, and improved operation efficency, ensure the safety of working environment. 12. Haiqi gasification system is fully closed, it is neat and beautiful look at site, no harmful to operation people. Automatic fuzzy control, easy to operate. All fuel feeding, slag discharge door, overhaul hole use soft seal, On the top of furnace has a seal cover to avoid gas leakage. The sealing of furnace is good, realizing good effect of oxygen controlling and pyrolysis. 13. When pyrolysis gas spontaneous combustion take place, then it enter into a process of spontaneous combustion, auxiliary combustion device will stop automatically. The whole process of spontaneous combustion is over 90%, greatly lower running cost. Realized resource utilization of waste thermal energy. Flue gas emission is no harmful and total CO2 emission is reduced. APPLICATION SCOPE 1. Oil/gas/coal fired boiler, Boiler Industry (steam boiler, thermal oil furnace, hot water boiler) 2. Smelting Industry (aluminum melting furnace, reverberatory furnace) 3. Drying Industry (food drying, sawdust/wood chips/biomass drying) 4. Spray Coating Industry (metal spraying, electroplating heating) 5. Greenhouse, Building Industry (asphalt heating)

Rotary Dryer PRODUCT FEATURE 1.Strong overload capacity resistance ,large process load, low fuel consumption, and low cost, stable and reliable operation. 2.With the low outlet temperature, the high heat efficiency. 3.The operating parameter can be changed according to different materials. 4.The granularity and the moisture and be controlled by the customers demand. 5.The riding wheel device and the rolling ring keep linear touch all the time, reducing the abrasive and the power loss. 6.The zero level thrust of the dryer reduces the abrasion between the catch wheel and the riding wheel. -

Supplier: Micro silica (silica fume), silica, fly ash, pozzolano, ggbfs and white cement, other cementatious materials and factory/plants specialized spare parts & equipments, automation & switchgear, drives & transmission spares, instrumentation & pump, pneumatic & hydraulic spares, valves & actuators, mechanical parts, high carbon ferro chrome, foundry pig iron, iron ore concentrate, chromite ore, antimony ore, silicon metal 441 (powder), ferro silicon (fesi), iron ore pellet, copper concentrate

The flash dryer is widely used in the dispersion and drying of granular, powdery, paste-like and filter cake-like false agglomerates in the chemical, pharmaceutical, building materials, food, feed, and other industries. The flash dryer has the advantages of the small occupied area, low energy consumption, high thermal efficiency, and continuous mass production. The flash dryer body is provided with a rotary cutting device, and the dry material is subjected to shearing, rotating, collision, friction, etc., so that the material is pulverized and refined, and is highly dispersed, thereby achieving the effect of efficiently and rapidly evaporating water. The dryer is equipped with an air filter to achieve the cleanliness of the hot air and to provide production conditions for the hygiene requirements of the food industry. The machine sets the cyclone separation and collecting materials. In addition, the bag dust removal receipt is added to increase the material recovery rate. It can improve the economic efficiency of enterprises. The dryer can be customized according to user needs.

Supplier: Wood pellet and power plant
Buyer: Wood pellet and power plant

Supplier: Wood pellet , power plant, food, LED product, glass product, biomass gasify system, water treatment system

Supplier: Cattle feed pelleting machine, turn key project of pellet plant, cattle feed & feed machinery
Services: Manufacturer
Buyer: Steel, & other metal part