Yc series onshore hydraulic piling hammer
The hydraulic pilling hammer is developed on the base of our decades of experience in designing, manufacturing and using hydraulic impact equipment (hydraulic hammer).The striking energy can be adjusted according to geological condition and pile sinking depth at any time. It can realize pile groups work programmable control by copying the process of trail pile. Pile cap can be designed according to customers’ requirements.Various specifications can be provided from 36kj to above.
Main advantages:
1.Fully closed hammer housing(patent technology).
2.The ram can be superposed to obtain different energy pile hammer(patent technology).
3.The patent technology of superimposable ram can prolong the action time of striking energy.
4.High integrated hydraulic driving system.
5.Automatic plugging technology for high pressure pipeline pressure lose.
6.Oil draining technology for pipeline, avoiding oil leakage and pollution when shifting to construction site.
7.Program control, striking energy can be set arbitrarily in nominal range.
8.Sensor technology, remote technology and man-machine interface realize pressure, temperature and location can be monitored.
9.Not only can pile by the guidance devices but also can make free hanging piling.
Application
It mainly applies in construction of high rise and super high rise buildings, harbor expanding, dams, transportation facilities, especially suitable for precast concrete piles plating, steel pipe piles and steel sheet pile sinking.
Supplier: Concrete testing equipment, chloride tester, alkali tester, concrete ion penetration tester, strength tester, test hammer, rebar locator, thickness tester, crack width tester, ndt equipment, pile testing equipment, high strain dynamic pile tester, low strain dynamic pile tester, static loading tester
1. Follow the specifications: ASTM D5882 Standard Test Method for Low Strain Integrity Testing of Piles JGJ106-2003 (China) Technical code for testing of building foundation piles 2. Parameters:: 1). Size: 62 * 172 * 225 mm. 2). Weight: 2.0 kg. 3). High-contrast touch screen display. 4). Temperature range: Operating Range: 0° to 40° C; Storage Range: -20° to 65° C. 5). Powered by internal battery (6 hours duration). 3. Functional: 1). The LPT-E is used for Integrity pile testing and judging defect position 2). Automatic data storage 3). Signal amplification capability 4). Data can be averaged over a variable number of blows. 5). Variable signal amplification over time 6). 24-bit A/D converter 7). Sample size: 4k 8). Sample Frequency: 48kHz, 96 kHz,144 kHz
1. Follow the specifications: ASTM D4945 Standard Test Method for High-Strain Dynamic Testing of Piles JGJ106-2003 (China) Technical code for testing of building foundation piles 2. Physical (1) Size: 62 *172 * 225 mm (2) Weight: 1.7 kg (3) 8 inch and high brightness color LCD touch screen (4) Temperature range: Operating: 0° to 40° C; Storage: -20° to 65° C (5) The cables and connectors are suitable for PDA 3. Technical (1) HPT used for determining the pile bearing capacity and pile integrity. (2) It can be used for pile driving monitoring and the cast-in-place pile test. (3) Sampling frequency is Optional of 10 kHz, 20 kHz, 30 kHz and 40 kHz. (4) Sampling points are optional of 1024, 2048 and 4096. Maximum sampling time is up to 400 ms (5) Before test the two accelerometers and two strain transducers are self-checked automatically, determine whether the system is in normal state. (6) Automatically check the static strain deviation of the strain transducer during installation and adjusted to zero before blow. (7) Test data exported through the external u-disk (8) During test every blow can be saved automatically (9) Storage capacity of more than ten thousands blows. (10) HPT can be used for pile driving monitoring and the cast-in-place pile (11) HPT data can save as *.X01(used for PDA-W) (12) The main cable and connecting cable are compatible with the PDA. (13) Built-in lithium battery can be used more than 5 hours continuously. (14) PDAR program carry on CASE method analysis. (15) RCAPWAP program carry on match analysis automatically or manually.
1. Follow the specifications: ASTM D5882 Standard Test Method for Low Strain Integrity Testing of Piles JGJ106-2003 (China) Technical code for testing of building foundation piles 2. Parameters:: 1). Size: 62 * 172 * 225 mm. 2). Weight: 2.0 kg. 3). High-contrast touch screen display. 4). Temperature range: Operating Range: 0° to 40° C; Storage Range: -20° to 65° C. 5). Powered by internal battery (6 hours duration). 3. Functional: 1). The LPT-E is used for Integrity pile testing and judging defect position 2). Automatic data storage 3). Signal amplification capability 4). Data can be averaged over a variable number of blows. 5). Variable signal amplification over time 6). 24-bit A/D converter 7). Sample size: 4k 8). Sample Frequency: 48kHz, 96 kHz,144 kHz
1. Follow the specifications: ASTM D4945 Standard Test Method for High-Strain Dynamic Testing of Piles JGJ106-2003 (China) Technical code for testing of building foundation piles 2. Physical (1) Size: 62 *172 * 225 mm (2) Weight: 1.7 kg (3) 8 inch and high brightness color LCD touch screen (4) Temperature range: Operating: 0° to 40° C; Storage: -20° to 65° C (5) The cables and connectors are suitable for PDA 3. Technical (1) HPT used for determining the pile bearing capacity and pile integrity. (2) It can be used for pile driving monitoring and the cast-in-place pile test. (3) Sampling frequency is Optional of 10 kHz, 20 kHz, 30 kHz and 40 kHz. (4) Sampling points are optional of 1024, 2048 and 4096. Maximum sampling time is up to 400 ms (5) Before test the two accelerometers and two strain transducers are self-checked automatically, determine whether the system is in normal state. (6) Automatically check the static strain deviation of the strain transducer during installation and adjusted to zero before blow. (7) Test data exported through the external u-disk (8) During test every blow can be saved automatically (9) Storage capacity of more than ten thousands blows. (10) HPT can be used for pile driving monitoring and the cast-in-place pile (11) HPT data can save as *.X01(used for PDA-W) (12) The main cable and connecting cable are compatible with the PDA. (13) Built-in lithium battery can be used more than 5 hours continuously. (14) PDAR program carry on CASE method analysis. (15) RCAPWAP program carry on match analysis automatically or manually.
Purpose SYR51+ rebar Location system is used to test rebar diameter, distribution, coating thickness in concrete. Specification JGJ/T152-2008 Performance Longer service life of the Connector Clip: The instrument has long service life because of using Lemo Connector Clip which comes from Swiss and uses for aircraft industry. Good quality of signal cable: The signal cable has long service life because of its flexible and substance. High precision and stability: The instrument can locate the steel-bar accurately and quickly. Longer service life of the sensor: Improve the service life by paste abrasion resistance allowance bottom of the sensor Single sensor: No-change sensor in test, switching between high and low test range can assure the precision of test data and the test depth. Display test information real-time: Display the test data directly to avoid man-made errors. Grid and section scan mode: Instrument can display steel bar distribution and scan steel bar without concrete boundary limited. Three-wheel steel-bar scan system: The system can assure scan path along line and the precision of test data. Powerful Windows data process and analysis software: Software can display analysis result by diagram. Test data can be export to word or Excel easily.
Purpose The instrument is used to test the degree of steel-bar corrosion in electrochemical method. Specification GB50204-2002 Performance 1. Two test mode. The potentiometry and gradient method is used to test steel-bar corrosion which fit for different working field. 2. Permanent reference electrode. Saturated CuSO4 solution is sealed up completely in reference electrode. Field test keeps clean, simple and pollution-free operations. 3. Automatic measure environmental temperature. Instrument design to contain a measure environmental temperature module, it can measure, record and display environmental temperature quickly no thermometers required. 4. Can save test date. Convenient for laborer data management. 5. Display test result intuitively. Display test result used icon mode, The icon color is more dark, the steel-bar corrosion is more serious. User can observe the corrosion degree intuitively. 6. Real USB transmission. Data can be transmitted to computer for future process and analysis. 7. Powerful data process and analysis software in windows. Software can display analysis result by spectrum and isoline. Test data can be export to word or excel easily. Performance 1. Test range: +/-2000 mV 2. Testing accuracy: +/-1 mV 3. Test point distance: 1~ 99cm setting 4. Applicable environmental: Temperature: -10? ~ +40? Dampness:
china coal 0001 Introduction of Hydraulic Spiral Screw Pile Driver 1. Hydraulic Spiral Screw Pile Driver using a new hydraulic technology, low consumption, large rotary torque,move the hole and shift the position is convenient. 2. The drilling rig structure is compact, it has a telescopic compensation function when promoting the slide carriage, the slide carriage supported on the ground when drilling, the drilling stability is very good. 3.The drilling rig is mainly used for piling anchoring, well, photovoltaic solar rotating pile and water conservancy, power plants, open-air mining, road construction and other stonework blast hole drilling and so on. Parameters of Hydraulic Spiral Screw Pile Driver Hydraulic Spiral Screw Pile Driver Pile driver part Engine power Kw 34 No. of cylinders PCS 4 Engine brand Changcai engine Working pressure 16-20 MPA Wheel distance M 2 Machine size MM 4100x2000x2200 Machine weight T 3.5 Hydraulic hammer Part Drill rod diameters MM 70 Drill rod weight KGS 19 Hydraulic hammer weight KGS 230 Working flow L/MIN 40-70 Working pressure Bar 110-140 Impacting frequency bpm 500-900 Pile height m 2-6.5
Supply marine mooring and towing winch:, , we, jingjiang top far international trading co., ltd(www dot chinatopfar dot com), can supply kinds of winch with following details :, 1, mooring winch, position winch, hydraulic single winch, hydraulic combined mooring winch, towing winch, electric winch, pontoon winch, , 2, winch for engineering vessel: main hoist winch, auxiliary hoist winch, luffing winch, ship shifting winch, hammer lifting winch, hammer control winch, main pile winch, auxiliary pile winch, , certificates: abs, gl, lr, bv, rms, nk, ccs, etc can be provided., , please feel free to contact with us freely for your inquiry: info at chinatopfar dot com,
