Welding Valve Testing Bench

Valve testing Jwtq-type diving valve test bench, test machine valves, valve testing equipment, valve inspect equipment Prevjiy valve sealing surface grinding machine. Next jlt vertical valve hydraulic test bed. Jwz type valve test bed jwztq forged steel valve test bench jwzq type valve test equipment jwt type welded valve test equipment jld type butterfly valve test machin. Jwz type double side valve test bed

Zhejiang YOUJI Machinery Technology Co.,Ltd. Suitable for small diameter flange, welding type, internal and external thread forged steel valve pressure performance test, fully meet the requirements of gb/t13927-2008, jb/t9092-99, api598; Both jaws clamp and pressure tight type and sinks the test pieces into the water tank, the lifting function, and is especially suitable for gas pressure test, operation and use are convenient, The system is equipped with high and low pressure water pump pressure supply device; Pressure test medium is water and gas, which is selected by users; In the test of water or gas pressure in the process, the valve cavity has a higher pressure in the case of any one button does not work, has been pressure relief to the normal work; The machine is provided with a hydraulic automatic unloading system, when in use, high pressure and discharge charge state automatic switching, effectively reduce the oil temperature, prolong the service life of the equipment, saving energy and reducing consumption. Safety protection device with pressure test Can be set with computer testing data management system.

Supplier: Steel structures, high voltage & low voltage, cables/accessories, electrical & instrumentation products, industrial pumps, electric motors and accessories, industrial valves, gear drives, vfd drives, soft starters, transmission couplings, ht and lt control panels, mcc panels, fasteners & welding consumables, scaffolding material, chemicals, irrigation spares.
Services: Engineering procurement company/merchant exporter

Reference Standards: TSGZF001-2006, GB-T12242-2005, GB-T12241-2005, GB-T12243-2005 Range of application: applicable for the set-pressure, setback pressure and sealing tests of direst loaded and pilot-operated safety valves. Technical Parameters: Maximum drift diameter: DN400mm Maximum test pressure: 60Mpa Pressure test precision: pressure gauge of 0.4 grades (Users can choose a more precise one.) Test medium: nitrogen, compressed air or clean water (Gas liquid dual-capable one can be designed.) Functions and Characteristics: The equipment has advanced design principle. It uses pneumo-hydraulic booster pump as its clamping pressure source and air driven gas booster pump as its test pressure source. A gas cylinder is equipped, which enables the test to be conducted continuously. â?¢The test pressure is adjustable and the process of pressurization is stable. â?¢Clamping pressure source and test pressure source can use imported booster pumps from America or Germany, which have a wide range of output pressure. â?¢All the manual high pressure valves, pipe fittings and connectors are imported ones, which guarantee their pressure levels, safety and reliability. Most gas and liquid media are available. MAQ-400 /48BA Functions and Characteristics: Maximum drift diameter: DN400mm Maximum test pressure: 48Mpa Pneumatic control hydraulic clamping device is adopted. Clamping force is adjustable. The equipped pressure gauge displays the corresponding clamping force and provides a comparison table between the pressure and the clamping force, which facilitates operators to choose appropriate lamping force according to the safety valve calibration pressure and the drift diameter. All the valves, pipe fittings and connectors are made of stainless steel. The test is operated manually and operators record the data. The system includes two test and calibration tables. One is equipped with two clamping devices. There are totally three clamping devices: one is for safety valves of DN15-DN100; one is for safety valves of DN100-DN200; one is for safety valves of DN200-DN400. â?¢Various test tools are equipped to meet the needs of customers on different kinds of safety valves.

Socket Weld Gate Valve Main features * Bolted body-bonnet design for valves up to Class 800, 1500, 2500, 4500. Valves with welded bonnet also available on request * Screwed with a seal-welded body-bonnet design for valves of Class 1500,2500, 4500. * Bellows-sealed Gate and Globe valves available in Class 800 * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option

Supplier: Valve test benches, valve testers