Supplier: Sanitary reversing valve, sanitary mixproof valve, sanitary, aseptic sampling valve, sanitary manual globe valve
Product Name: Stainless Steel Sanitary Divert Seat Valve Valve Body Material: 1.4435/1.4301, SS304/SS316L(Forged) Seal Material: EPDM (standard) conforms to FDA177.2600 Surface Finishing: Mechanically polishing , Sand blasted Operating Principles: Single Seat Valve is operated by single acting or double acting pneumatic actuator, the air push valve shaft move to on and off position.This valve is hygienic design,applied to all kinds of,food processing,drink,and pharmaceutical industry. Max Working Pressure: 10Bar/145 PSI Max. Working Tem.: 140 degree C Air Pressure: 5-7 bar G1/8"(BSP) Availably Size: DN25-DN100,1"-4" Operated:Pneumatic Gasket: EPDM, silicone or Viton Connection:weld,clamp,thread, Control: Sensor, Pneuamtic actuator(single acting, double acting), electric actuato, C-TOP, C-top controller(AS-I) Certificate: PED 2014/68/EU, FDA.177.2600
Sanitary clamp ball valve No. Jobv-2001 Applications: Both manual and automatic operated hygienic 2-way ball valve are mainly used in processing beverage, wine, oil refining, cosmetics and chemical industries. Design features: Size: 1/2?-4?, dn10-dn100 Temperature: -20c-120 c Pressure: 10 bar Material: aisi304, aisi316l Gaskets: ptfe fda 177. 1550 Whatever the connection, it does not change the total length of the valve Connection: clamp, weld, male, flange, standard with 3a, sms, din, rjt, idf. Advantage: smaller and lighter than other type ball valve, operating torque is small, it can be installed with pneumatic actuators and electric actuators. Certificate: ped/97/23/ec
Pneumatic Sanitary Ball Valve Overview: Pneumatic sanitary ball valve (quick-installation ball valve) is a sanitary valve that meets high-standard manufacturing standards. It is usually connected to the pipeline by a card box and quick-installation method. It can be more convenient for dry disassembly, maintenance and cleaning. Pneumatic sanitary ball valves are made of SUS304 and 318L stainless steel materials. The inner and outer surfaces have been polished and sterilized, and have undergone precise inspection procedures and strict quality management. They can meet the needs of wine, food, biopharmaceutical and other industries. special requirements. The pneumatic sanitary ball valve adopts the all-inclusive F4 seal, which is easy to clean without any dead ends, and has no individual accumulation area. It is completely clean and meets the standards of food hygiene. Pneumatic Sanitary Ball Valve Features: 1. The pore size of the pneumatic quick-loading ball valve is consistent with that of the pipeline, and the surface is smooth without dead ends, and no sediment will be generated; 2. The inner wall of the flow channel is polished and sterilized to fully meet the sanitary standard; 3. Pneumatic sanitary ball valve adopts all-inclusive fluorine-lined (PTFE) sealing form, there is no dead angle and easy to clean: 4. Pneumatic quick-loading ball valves are all made of stainless steel, and the inner wall of the flow channel is 0.5um electronically polished to keep the fluid unimpeded. Application of Pneumatic Sanitary Ball Valve: Pneumatic sanitary ball valves are equipped with solenoid valves, travel switches and other related accessories, which can be used for remote automatic control, and can also be equipped with valve positioners to input 4-20mA signals according to the needs of working conditions, so as to adjust the quality of the pipeline, and the pneumatic hygiene The inner wall of the ball valve is long and smooth, no dead angle, seamless, automatic exhaust and other channels, and it is also very suitable for the needs of cleaning in place. It is widely used in food, sour wine, beverages, dairy products, fine chemical pharmaceuticals and biological engineering, etc. Many industries.
Sanitary Ball Valve Sanitary ball valves feature a full-bore design that enables full fluid flow with minimal pressure drop, making them ideal for handling viscous liquids or liquids containing particles in the food, beverage, chemical and pharmaceutical industries. full bore sanitary ball valves, low ferrite 316L, 1/2" - 4" (DN15 - DN100), TFM seats (cavity and non-cavity) and seals, for pharma clean steam, air and gas, acids and pneumatic conveyance of pharma powders. BST is one of only a few sanitary ball valve manufacturers in the world to manufacture (and stock) thru-bore sanitary valves in a variety of sizes and end connections.
Product Name: Stainless Steel Food Grade Sanitary Hygienic Manual Triclamp Butterfly Valve Valve Body Material: 1.4404/1.4301, SS304/SS316L(Forged) Disc: 1.4404/1.4301, SS304/SS316L(Forged) Seal Material: EPDM (standard) conforms to FDA177.2600 Surface Finishing: RA
Product Name: Triclamp Sampling Valve sample valve with Coil Beer Foam Eliminator for Beer Fermentation Tank Valve Body Material: 1.4404/1.4301, SS304/SS316L(Forged) Surface Finishing: RA
Product Name: Sanitary stainless steel SS304 SS316L Pneumatic Tank Bottom seat Valve Valve Body Material: 1.4435/1.4301, SS304/SS316L(Forged) Seal Material: EPDM (standard) conforms to FDA177.2600 Surface Finishing: Mechanically polishing , Sand blasted Operating Principles: Tank Bottom Valve is operated by pneumatic actuator, Air-Spring or Air-Air, Compressed Air push valve shaft to on or off position, Valve Seat open inside to avoid auto opening when pipeline over pressure. Air Pressure: 5-7 bar G1/8"(BSP) Availably Size: DN40-DN100,1.5"-4" Operated: Pneumatic Gasket: EPDM, silicone or Viton Connection: weld,clamp,thread, Control: Sensor, Pneuamtic actuator(single acting, double acting), electric actuato, C-TOP, C-top controller(AS-I) Certificate: PED 2014/68/EU, FDA.177.2600
Product Name: Sanitary stainless steel SS304 SS316L Pneumatic Tank Bottom seat Valve Valve Body Material: 1.4435/1.4301, SS304/SS316L(Forged) Seal Material: EPDM (standard) conforms to FDA177.2600 Surface Finishing: Mechanically polishing , Sand blasted Operating Principles: Tank Bottom Valve is operated by pneumatic actuator, Air-Spring or Air-Air, Compressed Air push valve shaft to on or off position, Valve Seat open inside to avoid auto opening when pipeline over pressure. Max Working Pressure: 10Bar/145 PSI Max. Working Tem.: 140 degree C Air Pressure: 5-7 bar G1/8"(BSP) Availably Size: DN40-DN100,1.5"-4" Operated: Pneumatic Gasket: EPDM, silicone or Viton Connection:weld,clamp,thread, Control: Sensor, Pneuamtic actuator(single acting, double acting), electric actuato, C-TOP, C-top controller(AS-I) Certificate: PED 2014/68/EU, FDA.177.2600
