Centrifugal gold concentrator is a relatively new type of gravity concentration apparatus. The machines of pioneer s stlb series concentrator utilise the principles of a centrifuge to enhance the gravitational force experienced by feed particles to effect separation based on particle density. The key components of the unit are a cone shaped "concentrate" bowl, rotated at high speed by an electric motor and a pressurized water jacket encompassing the bowl. Feed material,typically from a ball mill discharge or cyclone underflow bleed, is fed as a slurry toward the centre of the bowl from above.The feed slurry contacts the base plate of the vessel and due to its rotation, is thrust outward.The outer extremities of the concentrate bowl house a series of ribs and between each pair of ribs is a groove. During operation the lighter material flows upward over the grooves and heavy mineral particles (usually of economic value) become trapped within them. Pressurized water is injected through a series of tangential water inlets along the perimeter of each groove to maintain a fluidized bed of particles in which heavy mineral particles can be efficiently concentrated.
Centrifugal gold concentrator is an efficient equipment for recovering free gold in all particle size ranges,specially for recovery of fine gold which is lost during the operation of the gravitational concentrators(sluice boxes and jigs). It can be used not only for placer gold mining, but also for recover the natural gold from hard rocks, to replace amalgamation, and recover gold from the tailings.
Supplier: Sugar, urea and rock phosphate, Ductile iron pipes and fittings, carbon steel pipes and fittings, surge arresters and composite insulators (11 223 kv), heavy machinery attachments for excavators and skid loaders, fuel oil, pet coke and iron pellets, aerosol fire suppression devices
Services: Consultancy services, business set up, facilitating, brokerage, contracting for electromechanical work in abu dhabi
Buyer: Lithium carbonate
Supplier: Liquid adblue, urea for agricultural, technical grade urea for adblue, anhydrous ammonia, base oils, lubricants, paraffin wax, labsa, rock phosphate, npk, ammonium nitrate, polypropylene, en590, jet a1, chemicals, construction materials
Supplier: Micro silica (silica fume), silica, fly ash, pozzolano, ggbfs and white cement, other cementatious materials and factory/plants specialized spare parts & equipments, automation & switchgear, drives & transmission spares, instrumentation & pump, pneumatic & hydraulic spares, valves & actuators, mechanical parts, high carbon ferro chrome, foundry pig iron, iron ore concentrate, chromite ore, antimony ore, silicon metal 441 (powder), ferro silicon (fesi), iron ore pellet, copper concentrate
Gold centrifugal concentrator is a new type of gravity mineral processing device., it can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, but also used to recover gold from the old tailings. It is widely applied on recovering free gold in all particle size ranges, especially for recovery of fine gold which is lost during the operation of the gravitational concentrators (sluice boxes and jigs). Test showed that the machine is very effective for separating monomer gold in vein gold deposits as replacement of mercury plate. The recovery can be as high as 99%, the cleaning up cycle is 1~4 hours, and the upgrade ratio is up to 1, 000 times. Especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of ¡ª0. 074mm, the recovery for the natural gold is expected up to 98%. For those natural gold of 0.004mm in particle size, the recovery is 97% The gold centrifugal concentrator can treat particle sizes from below 10 microns up to a maximum of 6mm and is most commonly used for recovery in gold and platinum. Other recovery uses include mercury, palladium, tantalum, copper, silver and diamond indicator minerals. Structure and working principle The machine is operated by motor via belt driving draft to make liner rotate at a high speed. Slurries are delivered to liner through feed pipe and are subject to stronger process of separation under the action of centrifugal force. Heavy mineral remains in the lattice chute of liner and light mineral is drained via tailing chute. Concentrate is discharged through outlet after one shift operation and shutdown of the machine. Technical parameters Model Power Capacity Slurry water Jet water Concentrate Kw T/h L/min L/min Kg/shift Stlb20 0.75 0.5~1.0 16 30 1~2 Stlb30 2.2 2~3 120 80 8~15 Stlb60 4.0 10~12 400 250 20.
Description The centrifugal concentrator, a kind of gravity separation equipment, is suitable for the separation of heavy medium minerals that have enough specific gravity differences. STLB concentrator is kind centrifugal concentration equipment. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation. It is also used to recover gold from the old tailings. Since 1985, three models have been developed. Application shows that the recovery can be as high as 99%, especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of 0.074mm, the recovery for the natural gold is expected up to 98%. For those natural gold of 0.004mm in particle size, the recovery is 97%. The cleaning up cycle is 1~4 hours. And the upgrade ratio is up to 1,000 times. Working Principle Water jacket centrifugal concentrator is forced by centrifugal force increases mineral centrifugal acceleration, the minerals in the centrifuge spins a few times to get the equivalent in gravity state, then the proportion of mineral difference is magnified several times, Together with recoil mineral water to prevent compaction, thereby fine, mineral beneficiation achieve good results. Main models: D20 with 1-2t/h capacity D30 with 2-7t/h capacity D60 with 15-30t/h capacity D80 with 30-70t/h capacity D100 with 60-100t/h capacity
Supply Ability: 5 sets per Month Keywords: Rock stone impact crusher machine Dimension(L*W*H):2479x 2970x 2050 mm Capacity(t/h): Max 600 t/h Warranty of core components: 1 year Key Selling Points: Low Maintenance Cost Motor Type: AC Motor Input Max Feeding Size: 500 mm Machinery Test Report: Provided Condition: New Usage: ore,quarry ,sand making Place of Origin: China Warranty: 1 Year Model type: PF Rotate speed: 590-1480r/Min Showroom Location: None Weight: 14000 KG Crushing type: Impact Brand Name: HuaXin Compressive Strength: 100-250 mpa Video outgoing-inspection: Provided Type: Impact Crusher Core Components: PLC,Gear,Other,Motor,Engine,B earing,Gearbox Marketing Type: Other Applicable Industries: Building Material, Shops,Manufacturing application for mining : limestone,rock,concrete,coal Product name: pv liner plate hammer impact crushing parts crusher Protection way: Reversible Crushing Application: mining stone crushing Packaging Detail: metal case ,metal rack fixed, for pv liner plate hammer impact
Gold Centrifugal Concentrator is a new type of gravity mineral processing device., It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, but also used to recover gold from the old tailings. It is widely applied on recovering free gold in all particle size ranges, especially for recovery of fine gold which is lost during the operation of the gravitational concentrators (sluice boxes and jigs). Test showed that the machine is very effective for separating monomer gold in vein gold deposits as replacement of mercury plate. the recovery can be as high as 99%, The cleaning up cycle is 1~4 hours, and the upgrade ratio is up to 1,000 times. Especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of ¡ª0. 074mm, the recovery for the natural gold is expected up to 98%. For those natural gold of 0.004mm in particle size, the recovery is 97% The gold centrifugal concentrator can treat particle sizes from below 10 microns up to a maximum of 6mm and is most commonly used for recovery in Gold and Platinum. Other recovery uses include Mercury, Palladium, Tantalum, Copper, Silver and Diamond Indicator Minerals. Structure and Working Principle The machine is operated by motor via belt driving draft to make liner rotate at a high speed. Slurries are delivered to liner through feed pipe and are subject to stronger process of separation under the action of centrifugal force. Heavy mineral remains in the lattice chute of liner and light mineral is drained via tailing chute. Concentrate is discharged through outlet after one shift operation and shutdown of the machine. Technical Parameters Model Power Capacity Slurry water Jet water concentrate Kw t/h L/min L/min Kg/shift STLB20 0.75 0.5~1.0 16 30 1~2 STLB30 2.2 2~3 120 80 8~15 STLB60 4.0 10~12 400 250 20.
Gold concentrator.
Available for sale on behalf of my client: Two pieces of Diamond Drill Bits, American Oil and Gas Augur heads, produced by DPI PDC USA Original. Big bit size 12.1/4 inches Small bit size 8.1/2 inches Completely new, never used.
