DU bush sliding bearing is of high safety factor , and is particularly appropriate for high temperature environment where no oil is efficient and where the machine must be under successive long period working condition . This is widely used in steel metallurgy industry such as bushes for roller grooves of successive casting machines , cement grouting pumps and screw convery ers for cement . It can also be composed in steel housing or fabricated into flanged bushes which can move both in radial and in axial directions.
Pvb-010 steel back self-lubricating bush (du bushing) Structure: 1.Ptfe/pb mixture 0.01~0.03mm as sliding layer, provides an excellent initial transfer film, which effectively coats the mating surface of the bearing assembly, forming homogeneous oxide type solid lubricant film. 2.Porous bronze 0.2~0.3mm, provides max. Thermal conductivity away from the bearing surface, also serves as a reservoir for the ptfe-lead mixture. 3.Low-carbon steel backing 0.7~2.3mm, provides fundamental structural support and gives exceptionally high load carrying capacity, excellent heat dissipation. 4.Tin-plating 0.005mm or copper plating 0.008mm, provides good corrosion resistance. Characteristics: Good wear and friction performance over a wide range of loads, speeds and temperature without oil Also perform well with lubrication Maintenance-free, long life Availability: Standard cylindrical bushing, flanged bush, thrust washers and strips are availabe Lead free type is also available All special designs are produced according to your requirement Applications: Lifting equipment, hydraulics and valves, pneumatic equipment, medical equipment, textile machinery, agricultural equipment, construction equipment, meterial handing equipment, packaging equipment, automotive field, scientific equipment, drying ovens, office equipment, etc.
Tech Data Load capacity 140N/mm2 Temperature -200~+280 Speed limit 2m/s Friction coefficient 0.08~0.20+¼ PV limit (Dry) 3.8N/mm2m/s PV limit (Oil ) 60N/ m/s. Plastic bags, cartons.
Supplier: Du bushes
Supplier: All kinds of self-lubricating bushings including du bushing, dx bushes, bimetal bearing, bronze bushing, rod end bushes, engine bearing, camshaft bearing, pin bush, brass bushing, cooper bearing, plain steel bearing, guide bushing, slide plate, solid metal bearing, flange bushing, ptfe bearing, telfon bushing, pom based bush, graphite bearing
Jdb-10 brass alloy based solid lubricants bearing Structure: High strength brass alloy base+solid lubrcants Characteristics: Exhibits incomparable performance under a high load, low speed operation. Also perform well without lubrication, Excellent wear resistance in such places where an oil film is difficult to be formed due to reciprocating, oscillating motions and frequently intermittent operations Remarkable resistance to corrosion and resistance to chemical attack Maintenance free and save operating cost. Availability: Cylindrical bushing, flanged bushing, thrust washer and slide plate are standard fabrication. Special designs can be made according to your design. Application: Successive casting machine, mineral mountain machinery, shipping, steam turbine etc
Pvb-014 shock absorber bushes, reciprocating motion bushing Structure: 1.Ptfe with cooper 0.01~0.03mm 2.Porous bronze 0.2~0.3mm 3.Steel backing 0.7~2.3mm 4.Tin-plating 0.005mm or copper plating 0.008mm Characteristics: This type bush is efficient even under sudden break off the oil lubricating, wear Resistant, which can keep the lubricating oil clear after long period Of working. This bush can protect the mating surface from wearing. Particularly suitable for reciprocating movement. Availability: Standard cylindrical bushings, flanged bushings, thrust washers and strips are availabe Special designs are produced at short notice Lead free type is also available Applications: Particularly apply for reciprocating movement products, such as shock absorber of automobiles & motorcycles, pneumatic cylinder and so on
Jf-800( pvb031) bimetal bush Structure Metal backed with bronze graphite oilless bearings 1.Sinter bronze with graphite: good wear resistance with lower friction and excellent load carrying capacity. Bimetallic bushing can be machined after fitting to get precision tolerance. We also can supply the bearings with ptfe or graphite sprayed layer on the work surface to get much lower start friction. 2. Metal backing: gives exceptionally high load carrying capacity, excellent heat dissipation. 3.Copper plating 0.002mm, good corrosion resistance. Bearing surface The standard bearings we supply as plain surface, also we supply with cleaning grooves for small angular movements or in the presence of abrasive media or dirt, and indented surface for grease lubricated applications. Indented surface for grease lubricated applications. Cleaning grooves for small angular movements or in the presence of abrasive media or dirt. Application The special structure of the material suitable for hostile environments, for high load application which lubrication is difficult. Now jf-800 bimetallic bush has been widely used in water turbines, vane controls, injection molding machinery, packing machines, construction equipment, tire moulds, paper production machinery, furnace expansion plates, automotive transmission, heavy lifting chain linkage, food production equipment etc. Availability: 1. Standard cylindrical bushings, thrust washers and strips are availabe 2. Special designs are produced at short notice
Pvb090(fb090) wrapped bronze bushes, flanged bushing Material: Cusn8p Characteristics: Surface can be incorporated with spherical of diamond shaped indentations or oil grooves linear, oscillating and High load capacity and long life Cheap than traditional bronze bush, cost saving Availability: Standard cylindrical bushings, thrust washers, flanged bushing and strips are availabe Special designs are produced at short time Applications: Hoisting machines, construction machines, automobiles, tractors, trucks, machine tools and some mineral engines.
Supplier: SF-1(DU) oilless bush, SF-2(DX) marginal lubricating bush, JF bimetal bushing, FB bronze bush, JDB solid lubricant embedded bush, GE-ZR inlaid solid lubricating spherical bearing
