H-beam flange straightening machine
This machine is specially used for the h-beam flange distortion straightening, which includes hydraulic and mechanical straightening type.
The structure of mechanical flange straightening machine is simple, with convenient and reliable operation.
The hydraulic type straightening has strong straightening force and high automation, which is developed firstly by us.
The straightening roller and powered roller is good alloy steel, which are made after heat-treating with long life using.
H-beam flange straightening machine This machine is specially used for the h-beam flange distortion straightening, which includes hydraulic and mechanical straightening type. H-beam flange straightening machine is specially used for the h-beam flange distortion straightening, which includes hydraulic and mechanical straightening type. The structure of mechanical flange straightening machine is simple, with convenient and reliable operation. The hydraulic type straightening has strong straightening force and high automation, which is developed firstly by us. The straightening roller and powered roller is good alloy steel, which are made after heat-treating with long life using. Modelhyj600hyj800yj60yj80 Flangewidth150-600200-800180-800180-1000 Flangethickness20mm40mm60mm80mm Minwebheight160mm350mm350mm350mm Materialq235aq235aq235a/16mnq235a/16mn Straighteningspeed5.7m/min18m/min7.5m/min5m/min Motorpower9kw25kw29.5kw37kw Overallsize3600*720*18003500*1500*17004050*2900*21904050*2900*2190 Machineweight7000kg9000kg26000kg29000kg H-beam automatic welding production line, flame cutting machine manufacturer.
The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D. Equipment Technical Data Titer Range dtex 6.67-16.67 Spinning Pos. nos. 6-24 Spinning Pitch mm 700, 750 Plant Capacity TPD 15-80 Spinneret dia. mm 328, 358, 410 Spinning Mechanical Speed m/min 500-1,500 Spinning Processing Speed m/min 500-1,300 Stretching Mechanical Speed m/min 240 Stretching Processing Speed m/min 230 Total Tow Titer at Stretching dtex 600,000-3,000,000 Stuffer Box Width mm 160-410 Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101 Bale Weight kg 200-350 Application: Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well. Spinning Line: Continuous Dryer Hopper Screw Extruder Polymer Pipe Filter Spin Beam (Meter Pump System, Spin Pack, Spinneret) Quenching Unit Interfloor Duct Draw-off Wall Capstan Roller Sunflower Gearing Unit Automatic Fiber Can Device Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press
Straightening machine (sjs-103 , sjs-105) Feature: This machine cuts stright ferrous and nonferrous wires for use in such products as welding roods, kitchen utensils, fanblade covers, umbrella frames, bird and animal cages, racks for record, shoes and clothes, and suitcase frames. Please visit our web site at www(dot)goldspot(dot)com(dot)tw for more details. Price, moq, deliver time are negotiable, please contact us for correct quotation and product details.
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Price And Quantity: Minimum Order Quantity 1 Unit Price Range 2500000.00 - 3000000.00 INR/Number Product Specifications: Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Product Type Other Power Source Electricity Power 420 Volt (v) Usage/Applications Casting, Forging, Sheet metal etc Color Dark Blue Technology Other Operating Type Automatic Surface Treatment Painted Pressure 6-7 Bar Product Description: The Tunnel type/ roller conveyor shot blasting machine is best suitable for the shot blasting of I/H-Beam /Structural Steel Components etc. It consists of inlet and outlet side Roller conveyors as material handling systems. The components to be blasted are placed on inlet side of the roller conveyor, from where it travels forward and enters into the inlet tunnel. After passing through the inlet tunnel components enters into the blast zone which consists of 4 nos. of Blast Wheels. All these Blast wheel units are strategically placed around the Blast cabinet. The arrangement of the blast wheel ensures optimum blast cleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity onthe forward moving components & blast cleans them thoroughly. Blasted material moves forward and enters into the outlet tunnel. The spent abrasive from blasting operation after passing through the perforated floor plates will get collected in to the cabinet's bottom storage hopper. From where it is transferred to the bucket elevator, which elevate the abrasive vertically and discharges the same into a media separation unit where dust and fine abrasives are cleaned ensuring that only clean abrasive will re-circulate to the blast wheel units for effective and better cleaning. A Dust collection system is provided with the machine which will continuously remove the dust and fine particles, thus keeping the inside of the machine and the nearby environment dust & pollution free.
This unique machine is used to correct defected alloy wheels ranging from 10" to 22" Standard accessories list 1. 18 pcs rim attaching center 2. 1 pc metal pointer 3. 6 pcs press tips (in different forms) 4. 3 pcs support axis for press tips 5. 1 pc lever 6. 1 pc lathe pen 7. 1 pc upper support 8. 1 pc lower support 9. 4 pcs support pins 10. Flange nuts and bolts
Wire straightening and cutting machine Wire diameter : 3-6mm Speed: 110m per min Length: max 12m Function features: 1. High speed: this machine can reach high speed 110 m/min3 or 4 times of the normal one. 2. Accurate cutting precision: this is the outstanding advantage of our machine and the tolerance of cutting length is ±1mm. 3. Finished wire length can be as short as 0.8m and as long as 12m which is suitable for most wire mesh fence. 4. Easy operation: the machine is fully automatic and only one person is enough for operation. 5. Smooth working process: precise machine part and strict quality control making sooth working for long time. The main parameter: Diameter 3-6mm Length 0.8-12m Electric machinery 4kw Speed 110m/min Size(l× w× h) 7.6m×1.1m×1m Contract person: anny E-mail:2271663899@qq.Com Tel: 0086-318-15803186013 Hebei jiaoyang wire mesh machine co., ltd. Website:www.Weldingmachine.Cn 053600 The main welding machine is parked by plastic and the spare parts is packed by wooden case.
Wire straightening and cutting machine gt5-12 product specification Model: gt5-12 Raw material: 5-12(mm) deformed and plain wire Cutting length :800-12000(mm) Straightening speed(3 speeds optional): 70-100-130(m/min) Linearity of straightening: ¡ü2 [mm/m] Tolerance of cut-to-length: ¡ü¡à1 (mm) Total power: 35.5 (kw) Length gauge:manual Wire straightening and cutting machine gt5-12 characters: ¡ñspecial designed for the production of straightened and cut-off rods, high speed and high output: maximum speed can be up to 130 m/min. ¡ñhigh precision: cut-to-length tolerance ¡ü¡à1mm. ¡ñhigh linearity: straightened linearity ¡ü2mm/m. ¡ñautomatic length measuring driven by servo motor is available if required. Different length can be processed continuously without stop the machine, furthermore no need to stop the processing while adjusting the length. ¡ñtemporary collecting unit will open and store some quantity bars while the operator distributes the straightened bars from the collection pocket, the machine can keep operating. ¡ñaligning device can align the straightened bars together, easy to collection and distribution. ¡ñlow malfunction rate. Standard export packing
Wire cut and straighten machine Model cn-xs-1220a Panel length: 3000mm Panel width: 1220mm Mesh wire diameter: 1.8-2.8mm Wire material: low carbon steel wire, galvanized, no processed but wire surface is clear. Polystyrene thickness: 50mm-100mm Total panel thickness: max.130mm Truss wire: 2-3mm Capability: 5 mins per 1 pc 3d panel. (3000mmx1220mm), about 430 sqm/8hrs Mesh size: 50x50, 52x52mm Configuration: 3m2/min 0.6mpa Power: 380v 50hz 75kw Power consumption: 1.9-3.5kw per hour Dimension: 13.5x1.8x1.7m Worker need: 4 workers Weight: 4000kg
Main technical paramerers: No. Title Specification 1 Aligning Steel Bar Diameter (mm) 4-12 2 Cutting Length (mm) 200-6000 3 Cutting Length Error (mm) < 1.5 4 Aligning Speed (m/min) 18-25 5 Power (kw) 5.5-7.5 6 Installation Weight (kg) 700 7 Dimension (mm) 7250í-550í-1150 8 Barrel Diameter (mm) 90 9 Rotation Speed of Straightening Cylinder (rpm) 2800 Note The machine has little cutting error and fast straightening speed, which is suitable for preparation of reinforcement units such as cement product plants, metal works, and technique articles plants, etc.
