Flexible Push-Type Test Rig for Segmental Pipe Testing Logiball Push-Type Test Rig is used for segmental air testing of lateral lines, from the cleanout or above ground access. The standard test chamber between the two inflatable bladders is 5 feet long. A 3/4 semi-rigid hose is used as a push rod and to inflate both bladders in one operation. Air for the test chamber is supplied thru a 1/2 semi-rigid hose to be used as a second push rod and lateral test line. Logiball Flexible Push-Type Test Rig can be used in lines 4 to 6 inch in diameter. For sealing defective laterals using chemical grout, use the Flexible Push/Pull Type Packers The control system for inflation & test is offered separately.
Supplier: Automotive test instruments, flow meters, gps electronics, data loggers, load cell, test rigs, vehicle test services
Supplier: Test rig for the testing of automative components
Supplier: Jigs, fixtures, gauges, press tools, moulds, spm and machinery spares, test rigs, fabrication works
Supplier: Precision accurate leak testing machines, various testing rigs as per international standards, special purpose machines (spm), industrial automation, conveyors, assembly lines, robotic applications, bearing pressing machine, condenser & radiator fin inserting machine, industrial component washing machine, high pressure flow test machine, single piece movement complete assembly lines, life cycle test machines, torque testing machines, work stations, jigs & fixtures, shock absorber testing machines.
Supplier: Drilling rigs, forklift and test instruments, fuel injection pump test bench, balance machine
Application Air permeability tester, to determine the resistance of fabrics (woven, knitted and non woven textile materials) to the passage of air (air flow) under constant pre-set air pressure while firmly clamped in the test rig of selected test head/area. The specimen is loaded to the test area of the instrument easily by means of a pneumatic holder. By pressing down the holder to start the test. Air permeability tester equipped with a vacuum pump to draw air through an automatic interchangeable test head with a circular opening. The pre-selected test pressure is automatically maintained, and after a few seconds the air permeability of the test specimen is digitally displayed in the pre-selected unit of measure on the touch panel. After test the holder is released and the vacuum pump is shut off. Specifications Can be controlled by the touch panel Test result is displayed on touch panel, units can be shifted Equipped with printing function 11 nozzles are included Test heads: 5cm2, 20cm2, 50cm2, 100cm2 and ?50mm (), ?70mm () Measuring range: 0.1~12000mm/s(l/m2.S) Test pressure: 1~4000pa Max thickness of specimen: = 8mm Measuring accuracy:
Segmental Sewer Air Test Kits Segmental testing is used to identify and pinpoint leaking joints in sewer collection systems. The inflatable plugs are winched in tandem down the line and positioned to straddle the joint or span to be tested. Once the plugs are inflated, a low-pressure air test is performed to verify the integrity of the joint or span and to localize sewer defects. Lateral connections and lines can also be tested when there is an above ground access for the introduction of an inflatable sewer plug from the cleanout. The mainline plugs are positioned on each side of the lateral connection and the push plug is inserted into the cleanout access isolating the lateral connection and lateral line. Flexible Push-Type Test Rigs are used to perform low pressure air tests on laterals from an above ground access. Contact us with your application and requirements.
Supplier: Fuel injection pump test bench, balancing machine, wood working machine, DTH drill rigs