Link Cable

1/8" stereo mini jack- 2x XLR male with pure copper inside, Cable Length : 1.8meter MIQ: 500pcs Price : USD1.40/pc Payment Terms : T/T

Audio link cable with flexible jacket 1/8" stereo mini jack- 2x mono jackwith pure copper inside, cable length : 1.8meter MIQ : 500pcs Price: USD1.40/pc Payment term: T/T

The UV-light irradiation cross-linking process uses UV-light as the irradiation source, extrudes and coats the mixed photo-crosslinking polyolefin compound on the conductor wire core, and then immediately enters the special irradiation equipment for fused photo-crosslinking. The insulated wire core after light irradiation cross-linking can be produced into photo-crosslinking polyolefin insulated wire and cable products through cooling treatment at different temperatures and other subsequent processing. UV-light irradiation cross-linking method needs to be slightly modified only on the original normal extrusion production line. The upper traction, irradiation box and electric control cabinet with a small floor area can meet the operating requirements and produce UV-light irradiation cross-linked polyethylene wire and cable products. The addition of upper traction enables the conductor wire core to maintain a certain tension. In the running process, it shall be always in the center of irradiation box to ensure the best irradiation effect. The irradiation box uses a reflective focused UV light source that is uniformly configured and specially designed, and the electrical control system will ensure that the UV-light intensity and the irradiation temperature in the center of the irradiation box are in the optimum operating conditions. In addition, the efficient photo-initiation system rapidly induces cross-linking reaction of polyolefin under the UV-light irradiation, so that the irradiation equipment can reach a continuous production speed of dozens of meters per minute, and gradually cools at hot, warm and cold temperatures to ensure the stability of three-dimensional cross-linked netlike structure.

LED-UV2 type UV-light irradiation cross-linked cable equipment Ultraviolet Irradiation Crosslinking Equipment UV LED devices are the most advanced UV radiation sources in the world, characterized by extremely high energy efficiency (about 30%), extremely high selectivity of effective wavelength (half-power wavelength broadband: 5nm), extremely long service life (40,000 hours), low infrared heat and no ozone, making them more suitable for the cross-linking and solidity of cross-linked polyolefin and other materials. LED-UV type UV LED irradiation polyolefin cross-linked equipment adopts a circular cavity tunnel structure, installs a self-developed UV LED light source and forms a tunnel to the central area, whose radiant power can be infinitely set within the scope of 0~100%. Structural features of LED-UV irradiation cross-linked equipment: It pneumatically turns to enable the tunnel structure, which is easy for operation, cleaning and coiling; It uses the intelligent touch-type human-computer interface to monitor data, and the power of operating buttons is set on the touch screen interface; One push function co-exists with separate start; It uses refrigerating fluid for cooling, and uses anti-freezing solution dedicated for automobiles as cycling medium; It is connected to an external fume removal unit to exhaust fume to the outdoor through the air flue.

The STC-EE007 DVI-D Single Link cable features 2 male DVI (19-pin) connectors and provides a reliable, purely digital connection between your desktop or laptop computer and a DVI-D monitor or projector. The 3ft DVI-D male to male cable supports resolutions of up to 1920Ã??1600 and transmission rates of up to 9.9 Gbits/sec and is fully compliant with DVI DDWG standards.

The STC-EE019 DVI-D Single Link cable features 2 male DVI (19-pin) connectors and provides a reliable, purely digital connection between your desktop or laptop computer and a DVI-D monitor or projector. The 30ft DVI-D male-to-male cable supports resolutions of up to 1920 1600 and transmission rates of up to 9.9 Gbits/sec and is fully compliant with DVI DDWG standards.

The STC-EE023 DVI-D Male to DVI-I Female Adapter is an easy, inexpensive interconnection solution for two DVI devices. Featuring one DVI-D male connector for a source/adapter input and one DVI-I female connector for a monitor, STC-EE023 is ideal for situations like multimedia presentations where computer screen images need to be projected onto a larger display. Unlike cut-price adapters, the STC-EE023 is manufactured to exacting specifications, using superior materials, for optimal video performance. For peace of mind, the P118-000 comes with a lifetime product warranty and is RoHS-compliant, reflecting Tripp Liteâ??s commitment to environmental responsibility.

The STC-EE009 1ft DVI-D Dual Link cable features 2 male DVI (25-pin) connectors and provides a reliable, purely digital connection between your desktop or laptop computer and a DVI-D monitor or projector. The 1 ft DVI-D digital monitor cable supports resolutions of up to 2560 1600 and transmission rates of up to 9.9 Gbits/sec and is fully compliant with DVI DDWG standards.

1.Product description: *dia.:12.5-162mm *grade: am1, am2, am3 *surface: self color, black painted, galvanized *packing: wire rope bundled, ton bag, wooden box, drum, etc. *certificate: ccs abs bv nk kr gl lr rina rmrs 2.Company introduce: Qingdao real tiger marine company is located in the beautiful coastal city of qingdao, which is a professional one-stop marine equipment suppliers. Main products are anchor chain and accessories, ship anchor, mooring rope, wire rope, door, window, cover, bollard, chain stopper and other deck equipment. Products got ccs, dnv, gl, abs, bv, lr, nk, kr, rina classification society certificate, and passed the iso9001-2008 international quality system certification. Company adhering to the "high quality for success, sincere credit for cooperation" concept, sincerely serve for the domestic and foreign customers, efforts to achieve win-win cooperation.