Round steel bar is a round-shaped solid steel bar. It is hot formed, forged or cold formed. The specification of hot formed round steel is 5.5-250mm.
The small round steel are normally distributed in bundles of 5.5-25mm, and is normally use to make steel bar, bolt and all kinds of mechanical parts. Round steel greater than 25mm are mainly use to make mechanical parts or seamless steel tube ring.
Performance and application of material ST37: the material has good performance, that is, through cold rolling, it can obtain cold rolled strip and steel plate with thinner thickness and higher precision, with high straightness, high surface finish, clean and bright surface of cold rolled plate in Taiwan Strait, easy to be coated, various varieties, wide application, high stamping performance, non aging, and low yield point. Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material ST37 Thickness 0.1mm-300mm or as required Standard AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique Hot rolled,cold rolled Surface Treatment Clean, blasting and painting according to customer requirement Thickness tolerance �±0.1mm Application It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time Within 7-15 workdays after receiving deposit or L/C Export packing Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity 250,000 tons/year Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts.
192 is the steel of carbon structural steel, which is a kind of alloy steel and carbon steel. The carbon content is about 0.05%~0.70%, and some can reach up to 0.90%. It can be divided into ordinary carbon structural steel and high-quality carbon structural steel. Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material A192 Thickness 0.1mm-300mm or as required Standard AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique Hot rolled,cold rolled Surface Treatment Clean, blasting and painting according to customer requirement Thickness tolerance �±0.1mm Application It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time Within 7-15 workdays after receiving deposit or L/C Export packing Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity 250,000 tons/year Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts. Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Galvanized round steel bar Features: 1) standard: gb, jis, astm, bs, sus, aisi 2) place of origin: china
Specification 1.Excellent hardenability 2.Higher strength and toughness 3.Good mechanical performance and machinability Application 1.Foodstuff, gas, metallurgy, 2.Biology, electron, chemical, petroleum 3.Medical equipment Chemical composition C Si Mn P S Cr Ni 0.27~0.33 0.17~0.37 0.30~0.60 Â?¤0.035 Â?¤0.035 0.60~0.90 2.75~3.15 1.Specifications of 40cr steel Round bar Diameter(mm) Length (mm) 20~800 3000~5800 Plate Thickness(mm) Width (mm) Length (mm) Max:800 205~800 2000~4000 The specification can be customized. -
Specification 1.Excellent hardenability 2.Higher strength and toughness 3.Good mechanical performance and machinability Application 1.Foodstuff, gas, metallurgy, 2.Biology, electron, chemical, petroleum 3.Medical equipment Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
It is mainly used for the production of instruments, watch parts, automobiles, machine tools and other various machines with small force and strict requirements on size and finish. It requires strict dimensional accuracy and smoothness, and relatively low mechanical performance. Standard parts such as gears, shafts, bolts, valves, bushings, pins, fittings, spring seat cushions and machine screws, plastic molding dies, surgical and dental surgical instruments.
1,Size of 1020 steel round bar buy from China Round bar Diameter(mm) Length (mm) 20~800 3000~9000 Plate Thickness(mm) Width (mm) Length (mm) Max:800 Max:2200 Max:9000 The specification can be customized. 2,Chemical Compositons of 1020 steel round bar buy from China Grade C Si Mn P S Cr Cu Ni 0.15-0.25 0.17-0.37 0.50-0.80 max0.035 max 0.035 max 0.25 max 0.25 3,Features of 1020 steel round bar buy from China 1, Medium carbon structural steel 2, High strength and machinability 3, Good toughness, plasticity and abrasion resistance 4, Typically used in quenched and tempered or normalized conditions 4,Typical Applications 1, Widely used in machine manufacturing 2, For shaft parts 3, Stamping die drawing parts repair and hardfacing
Specification 1.Cobalt molybdenum high speed steel . 2.High hardness and superior hot hardness. 3.Excellent cutting preformance. 4.Offers excellent wear resistance. Application Chemical composition Name C Si Mn P S Cr V M42 1.05-1.15 Â?¤0.65 0.15-0.40 Â?¤0.30 Â?¤0.30 3.50-4.50 0.95-1.35 Similar grade Gb Aisi/astm Din Jis W2mo9cr4co8 M42 1.3247 Skh59 Physical properties Metric Imperial Density 8.16 g/cm3 0.294 lb/in3 Melting point 4680â°c 2600â°f Heat treatment M2 tool steels are pre-heated prior to hardening at 2610â°c (4730â°f) followed by rapid heating from 2610â°c (4730â°f) to 3960â°c (7160â°f). These steels are then cooled for 3 to 5 min and quenched in air, salt bath or oil. -
Specification 1.Oil hardening tool steel supplied in the annealed condition. 2.Good durability and excellent wear resistance. 3.Holds a good cutting edg. 4.Excellent general purpose too steel. Chemical composition C Si Mn P S Cr V 0.85-1.00 0.10-0.50 1.00-1.40 Â?¤0.030 Â?¤0.030 0.40-0.60 Â?¤0.030 Similar grade Gb Aisi/astm Din Jis 9crwmn O1 1.2510 Sks3