Drain Pump

Voltage: AC 220-240V/50Hz,220V/60Hz,120V/60Hz; Head: 1Meter Flow Rate: 20L/MIN Duty Type: Continuous. 27 sets/carton.

(Singlephase/Threephase) DARLING pumps have also developed little Jumbo pumps with smaller H.P. rating in the range of 0.75,1.0,1 !& & 2 H.P. While the constructional features and design of the little pump is similar to the Jumbo pumps. The little Jumbo pumps are powered with single phase as well as threephase electric supply. The little Jumbo pump is fitted with a sealed, leak-proof single phase or threephase motor. It also has a water jacket through which the water rushes towards the discharge. The motor in little Jumbo pump is also filled with oil for lubrication and also for cooling of bearings & mechanical Seal.

Flow: 20m3/h Head: 40m Power: 4kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage.

Flow: 10m3/h Head: 10m Power: 0.75kw Material: cast iron Medium: clean water Outlet dia: 50mm Speed: 2900r/min Voltage: 380V Phase: 3 phase/50Hz Color: Yellow Product overview: The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site. Usage: Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium. Conditions of using: 1.The medium temperature should not be over 40oC ,PH:4-10. 2.The solid volume ratio of the medium should not be over 2%. 3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s. 4.The density of the medium is 1.2*10 3kg/m3. 5.Centered on the impeller,underwater not more than 5m. Scope of application: 1. For discharging polluted waste water of factories and industries; 2. sewage discharge station of living quarters; 3. drainage system of municipal sewage treatment plant 4. drainage station of fire fighting system 5. waterworks equipment of running water factory 6. sewage discharge of hospitals and hotels 7. construction site of municipal engineering 8. matched equipment of exploration mine 9. country biogas digester 10.farm irrigation 11. other industries

Supplier: Submersible aerator, centrifugal pump, micro gear pump, magnetic gear pump, stainless steel tank manhole, manway

Supplier: Drain Pump Washing Machine Pump.

S/SH series is suitable for transporting pure water or other liquids of both physical and chemical natures similar to pure water. It is applicable to transport medium with temperature of not higher than 80â?? , and high temperature boiler water or transporting medium similar to hot water. If The TDG pumps add a cooling system with specfice shaft seal and materials, It can be used to transport boiler water, hot water, oil, chemicals or corrosive liquids with the temperature of not higher than 130.

Desulfurization pumps are corrosion-resistant pumps, mainly used for the transportation of corrosive liquids. It is a widely used pump among general equipment pumps. The desulfurization pump is usually a horizontal cantilever single-stage single-suction centrifugal pump, which is specially designed and developed for transporting corrosive media containing fine particles. The flow material of the desulfurization pump is required to be wear-resistant and corrosion-resistant.