UCS2904 is using the flexible FPC as the base material, FPC is conductive, fast heat dissipation,bending resistance, and can be bent into various shapes.It also supports post-installation code writing operations,can achieve a variety of animation effects by the controller programming,with Low voltage power supply, more secure,the IP rating have IP20 IP65,IP67 IP68,Based on the above advantages, the full color LED Strip will become a popular product for decoration, lighting, lighting, etc.
DMX512 RGBW LED using international standards DMX512 protocol products, is max485 module inside the dmx512 IC and with 4 colors in 1 RGBW 5050 led to be the light source,so, it is different from other DMX led strips. It is 5 wires DMX RGBW led strips, the transfer rate and transfer distance is better than 4 wires DMX led strip on the market. It can connect to the DMX console without decoder and with more colors programmable for DMX digital led strips.
one and multi point damage does not affect other parts of the strips and continue work. So no matter what or how many IC broken,the led strip will work normally.
1. This strip is 12V UCS2904 4 channel RGBW 60 led digital strips that different with DMX512 RGBW led pixel strips. Actually the protocol is compatible with SK6812 RGBW led tape.
2. Compared to the integrated SK6812 RGBW ones, this external IC chip 12V 144 pixels RGBW LED strip has much higher brightness and much stability.
3. 12V RGBW 144 pixels led strip have following advantages that digital RGB led pixel strips do not have.
.Presence of white LED allows for higher brightness and more color mixing options.
.4 colors LED allowing for tones that were previously hard to achieve with single RGB strip.
.White and RGB can be independently controlled to allows us to create bolder and more vibrant colors than with RGB alone.
4. Entire one meter strip has 48 pixels ( 192 channels), 144 pcs RGBW leds on 15mm width pcb board.
5. There are Warm white 2700K, Neutral White 4500K, Cold white 6500K white CCT to choose.
6. The strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every 3 LED. Solder to the 0.1" copper pads and you're good to go.
7. If the 12V UCS2904 RGBW pixel led strip does get damaged, it is often one pixel copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.
8. Widely used in entertainment, stage,live performance like 3D effects and TV shows, etc.
9. 12V 144 pixels RGBW LED digital pixel tape is offered in both waterproof and non-waterproof versions allowing for both indoor and outdoor applications.
More Details.
1. This strip is 12V UCS2904 4 channel RGBW 60 led digital strips that different with DMX512 RGBW led pixel strips. Actually the protocol is compatible with SK6812 RGBW led tape.
2. Compared to the integrated SK6812 RGBW ones, this external IC chip 12V UCS2904 RGBW 60 LED strip has much higher brightness and much stability.
3. Its advantage is this UCS2904 RGBW digital led strip can play pure white color compared to that classicial WS2811 RGB led strip couldnot.
4. There are Warm white 2700K, Neutral White 4500K, Cold white 6500K white CCT to choose.
5. Entire strip has 20 pixels ( 80 channels), 60 pcs RGBW leds in a meter with 10mm width pcb board.
6. The strip is made of flexible PCB material, you can cut this stuff pretty easily with wire cutters, there are cut-lines every 3 LED. Solder to the 0.1" copper pads and you're good to go.
7. If the 12V UCS2904 RGBW pixel led strip does get damaged, it is often one pixel copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.
8. Vivid lighting performance operated by Arduino, Raspberry Pi , Madrix software, Artnet / DMX512 /MADRIX NEBULA.
The lamp strip adopting the world's first built-in IC series lamp driving light emitting various XT1511 drive IC based plus a 104 capacitors. Driving lamp lamp panel looks very simple and beautiful, and the same XT1511 drive IC is a performance very stable brightness is very high. It is made of beads, high brightness, stable performance, surface appearance, concise, convenient production, low cost, so
Low barrier... Is the ideal choice for lighting lighting outdoor lighting design.
1, product type: XT1511 color light one meter 60 lights 60;
2, light source: SMD 5050 LED;
3, plate: FPCB;
4: Taiwan epstar chip, chip, and other chips in Taiwan;
5, IC model: XT1511, (1 m 60 IC, 1 IC 1 LED control lamp);
6, gray level: 256, (1 m 60 pixels);
7, LED number: 60 lights / meters, every 1 lights for a group, you can cut;
8, light emitting angle: 120 degrees;
9, light emitting color: can be adjusted by the controller, white, red, yellow, blue, green, and so on;
The lamp strip adopting the world's first built-in IC series lamp driving light emitting various XT1511 drive IC based plus a 104 capacitors. Driving lamp lamp panel looks very simple and beautiful, and the same XT1511 drive IC is a performance very stable brightness is very high. It is made of beads, high brightness, stable performance, surface appearance, concise, convenient production, low cost.
It is the ideal choice for lighting lighting outdoor lighting design.
1, Product type: XT1511 color light one meter 74 lights 74;
2, Light source: SMD 5050 LED;
3, Plate: FPCB;
4, Taiwan epstar chip, chip, and other chips in Taiwan;
5, IC model: XT1511, (1 m 74 IC, 1 IC 1 LED control lamp);
6, Gray level: 256, (1 m 74 pixels);
7, LED number: 74 lights / meters, every 1 lights for a group, you can cut;
8, Light emitting angle: 120 degrees;
9, Light emitting color: can be adjusted by the controller, white, red, yellow, blue, green, and so on;
The lamp strip adopting the world's first built-in IC series lamp driving light emitting various XT1511 drive IC based plus a 104 capacitors. Driving lamp lamp panel looks very simple and beautiful, and the same XT1511 drive IC is a performance very stable brightness is very high. It is made of beads, high brightness, stable performance, surface appearance, concise, convenient production, low cost.
It is the ideal choice for lighting lighting outdoor lighting design.
1, Product type: XT1511 color light one meter 144L-144LED;
2, Light source: SMD 5050 LED;
3, Plate: FPCB;
4, Taiwan epstar chip, chip, and other chips in Taiwan;
5, IC model: XT1511, (1 m 144 IC, 1 IC 1 LED control lamp);
6, Gray level: 256, (1 m 144 pixels);
7, LED number: 144 lights / meters, every 1 lights for a group, you can cut;
8, Light emitting angle: 120 degrees;
9, Light emitting color: can be adjusted by the controller, white, red, yellow, blue, green, and so on;
12V 4 in one 60P RGBW or RGBWW LED Strip light
Color Changing
Premium LED Strips
Superior & Safe Material
Easy Installation and Use
Worry-Free Warranty
MODEL NUMBER BL-SMD-5050-60P-RGBW / RGBWW
Input Voltage 12V / 24V DC
LED Brand Epistar
LED Type 5050SMD
LED power 4 in one 5050SMD
Power factory >0.9
LED QTY 60pcs LED per meter
LM / LED 18-20LM each LED
Power per meter 14.4W Per meter
LM/W 80-90LM/W
Lumen per meter 1000-1100LM/meter
Lifespan >50,000 hours
Color Available RGBW / RGBWW
PCB Width Double side, white color 8MM PCB
Waterproof rate 1. Non-waterproof Bare plate IP20 with 3M adhesive paper
2. Waterproof Drop Glue IP65 with 3M adhesive paper
3. Waterproof Silicon tube IP66 with 3M adhesive paper
4. Waterproof Irrigation Glue IP68 without 3M adhesive paper
Size 10*5000MM
Lens angle 120�?�°
Cutting Every 3pcs LED chip can be cutted
Operating temperature -15�¢?? to +40�¢??
Packing 5 meters per roll
Warranty 1 to 3 years
Certificates ETL / CE /RoHs
Color Changing: This 4 in one RGB Led strip lights kit can change colors and speed automatically and periodically. It has not only RGB(Red, Green, Blue), 16 multicolored options, but also has DIY selection to create your great led mood lighting.
Premium LED Strips: Led strip lighting has 300 premium 5050 SMD RGB Leds in 5M/16.4ft. Can be dimming with dimmer and brightness controls. Can be indoor and outdoor service.
Superior & Safe Material: Using double layer copper on PCB board to keep the mixed colors more even. Low Voltage working, More safe.
Easy Installation and Use: Led tape lights is cuttable between every 3 leds. You can cut off extra strips to adjust to a proper length. 3M self-adhesive tape can be fit on any dry and flat surface. Flexible to install anywhere you want.
Worry-Free Warranty: BEAUTY STC led strip lights support 60 Days 100% Satisfaction Guarantee and 2 Year Warrany. Our friendly customer service is always stand behind our product and reply all email within 24 hours.
