Pz Dreive Chipboard Screws

Chipboard ScrewsHeat Treated Case Hardened to Prevent Snapping 40 Degree Thread Angle, 25 Degree Point Angle Zinc, Yellow Zinc, Brass or Black Oxide available

PATTA self-drilling Chipboard screws have a coarse thread and fine shank to provide maximum grip and minimum strip out into chipboard, MDF board and soft timbers. The head has ribs molded around the countersunk head which help remove the chipboard particles when countersinking.

How to Use
1. Measure the total thickness of the materials to be fastened.
2. Choose a screw long enough to provide approx. 20mm of thread embedment into the chipboard or wood being fastened to.
3. Fit a #2 Phillips drive bit to a power screwdriver set to low speed, approx. 1000rpm.

normal size M3.0 M3.5 M4.0 M4.5 M5.0 M6.0
thread diameter min. 2.8 3.3 3.75 4.25 4.7 5.7
max. 3 3.5 4 4.5 5 6
head diameter min.. 5.6 6.6 7.5 8.5 9.5 11.5
max. 6 7 8 9 10 12
pitch 1.35 1.6 1.8 2 2.2 2.6
head height max. 1.9 2.1 2.5 2.7 3 3.6
shank max. 1.6 1.8 2 2.2 2.5 3
recess no. 1 2 2 2 2 3
recess depth min. 1.6 1.6 2.05 2.6 3 3
max. 2 2.1 2.5 3.1 3.45 3.45

Chipboard screws

Pozi double countersunk zinc plated waxed. Flat, oval, pan head, torx, head ribbs 2.5 x 10-6.0 x 160

Chipboard screw

Chipboard screw

Product name: Chipboard Screw/chipboard screws with saw/spax screw/sawed chipboard screw
Material: Carbon steel, stainless steel, brass.
Head type: flat/countersunk, pan, Double Flat, wafer head, CSK with 4(6) ribs
Finish: zinc plated, Black Oxide, Nickel, Rupert, Dacromet, and so on
Drive Type: Phillips, Pozi, square, Torx
Standard: DIN7505
Packing: bulk, plain box, color box, polybag, PP box + wood Pallet

Fasteners with a tapered shank (self-tapping screws)
chipboard screw & particle board screw
Similar to a drywall screw except that it has a thinner shank and provides better resistance to pull-out in particle board, while offset against a lower shear strength. The threads on particle board screws are asymmetrical.

concrete screw& Tapcons & masonry screw & confast screw & blue screw & self-tapping screw & Titen
A stainless or carbon steel screw for fastening wood, metal, or other materials into concrete or masonry. Concrete screws are commonly blue in color, with or without corrosion coating. They may either have a Phillips flat head or a slotted hex washer head. Heads sizes range from 0.1875 to 0.375 in (4.763 to 9.525 mm) and lengths from 1.25 to 5 in (32 to 127 mm). Typically an installer uses a hammer drill to make a pilot hole for each concrete screw.

deck screw
Similar to drywall screw except that it has improved corrosion resistance and is generally supplied in a larger gauge. Most deck screws have a type-17 (auger type) thread cutting tip for installation into decking materials. They have bugle heads that allows the screw to depress the wood surface without breaking it.

double ended screw & dowel screw & hanger bolt
Similar to a wood screw but with two pointed ends and no head, used for making hidden joints between two pieces of wood.
A hanger bolt has wood screw threads on one end and machine threads on the other. A hanger bolt is used when it is necessary to fasten a metal part to a wood surface.

drive screw & hammer drive screw
Chiefly used for attaching manufacturers data plates to equipment. Smooth round or mushroom headed with a multi-start thread on the shank, beneath which is reduced diameter shank that acts as a pilot. The screw is fastened by hitting the head with a hammer and is not intended for removal

drywall screw

Specialized screw with a bugle head that is designed to attach drywall to wood or metal studs, however it is a versatile construction fastener with many uses. The diameter of drywall screw threads is larger than the grip diameter.

eye screw & screw eye & vine eye

Screw with a looped head. Larger ones are sometimes called lag eye screws. Designed to be used as attachment point, particularly for something that is hung from it. A vine eye (in the UK at least) is similar to a screw eye, except that it has a proportionally longer shank and smaller looped head. As the term suggests vine eyes are often used for attaching wire lines across the surface of buildings so that climbing plants can attach themselves.

The sizes of flat head chipboard screws as follows:


3. Head type: flat head, pan head, round head, washer head

4. Slot type: square, phillips, phillips/square, pz drive, etc

We can produce according to your requests, and samples are available.


In carton case and put them on the pallet

Finish:ZINC
Material:Stainless Steel, stainless steel
Head Style:HEX, Flange Hex
Place of Origin:Handan, China
Model Number:007-Self Tapping Screw
Standard:DIN
Product name:Self Tapping Screw
Size:Application:Furniture,Binding,wood,concrete hex screw
Packing:Poly bag+Carton with pallet
Grade:4.8/ 8.8/ 10.9/ 12.9
Keyword:Flange Hex Head Self Tapping Screw
Surface treatment:hex head zinc screw

Our screws include: cross flat head screw, self tapping screw, self drilling screw, wood screw, drywall screw, hexagon screw, hex socket cap screw, mechanical screw, etc. All kinds of specifications and types can be customized according to the drawings, to meet various standard requests from different countries. Good equipment, consummate craft and strict management enable the quality of the products and service standard to reach the level of international market.