Zm3109 Mechatronics Training System

I. Overview
This equipment is suitable for college, university, technical schools mechatronics training system and maintenance major, mechatronics technology application, electrical run and control, electronics components application and maintenance, automatic control major etc. Experiment and hand on ability training.

Wooden pallet

i.About The Product Designed based on Toyota Crown 3.0 chassis, the training bench can illustrate the structures, working processes and assembly of the automobile steering, braking and driving systems. The device applies to automobile chassis and maintenance training courses of secondary and senior vocational schools, normal education and training institutions.It can fully meet the needs for chassis system structure, working simulation and assembly and disassembly practicing.

i.About The Product
The device holistically demonstrates the structure and operation of the engine ignition system based on real components of six ignition systems, including the mechanically timed ignition system, hall effect electronic ignition system, magnetic trigger electronic ignition system, optical trigger electronic ignition system, distributorless ignition system(Each ignition coil servers two spark plug),distributorless ignition system(Coil-On-Plug). The device applies to theoretical teaching and maintenance training of the ignition system in secondary and senior vocational skill schools, normal education and training institutions.
ii.Features
1.Six real and operable ignition systems are used to illustrate the structure and operating process of the ignition system. Such systems include the mechanically timed ignition system, hall effect electronic ignition system, magnetic trigger electronic ignition system, optical trigger electronic ignition system, distributorless ignition system(Each ignition coil servers two spark plugs),distributorless ignition system(Coil-On-Plug).
2.The training panel is made of advanced aluminum-plastic plate with characteristics of not less than 4mm thick, corrosion resistance, impact resistance, pollution resistance, fireproof, and moistureproof. Its surface are processed by special craft and spraying primer. Never fade color circuit diagram and working principal diagram are painted on the board whose surface coating with varnish. The trainees can learn and analyze the working principle of the control system by referencing the diagram and the real object.
3.The training panel is installed with detection terminals to detect electric signals, for example, resistance, voltage, current, and frequency, of circuit components of the ignition system.
4.The training panel's base frame is made of steel and the surface is paint-coated. Self-retention wheels are installed.
5.Instead of using accumulators and requiring charging, the training panel connects to a 220V AC voltage which changes to a 12V DC voltage through the internal circuit. The 12V DC voltage protects the training panel against short circuit.
6.Equipped with intelligent fault setting and appraisal system, include fault setting, troubleshooting and assessment functions etc.
iii. Basic Parameter
1.Size: 2400mm × 700mm × 1900mm (length x width x height)
2.External power supply: A.C. 220V ± 10% 50Hz
3.Operating voltage: 12V DC
4.Operating temperature: -40? to +50?

i.About The Product The device is designed based on the Volkswagen Jetta 1.6L exterior lighting system to holistically demonstrate the structure and operation of the system. The device applies to theoretical teaching and maintenance training of the lighting system in secondary and senior vocational skill schools, normal education and training institutions. ii.Features 1.A real and operable exterior lighting system is used to illustrate the structure of the system. 2.Various lighting switches can be operated. In this way, the device demonstrates operation of the exterior lighting system. 3.The training panel is made of advanced aluminum-plastic plate with characteristics of not less than 4mm thick, corrosion resistance, impact resistance, pollution resistance, fireproof, and moistureproof. Its surface are processed by special craft and spraying primer. Never fade color circuit diagram and working principal diagram are painted on the board whose surface coating with varnish. The trainees can learn and analyze the working principle of the control system by referencing the diagram and the real object. 4.The training panel is installed with detection terminals to detect electric signals, for example, resistance, voltage, current, and frequency, of circuit components of the exterior lighting system. 5.The training panel's base frame is made of steel and the surface is paint-coated. Self-retention wheels are installed and a 24 0cm tabletop is fixed on the base frame to place materials and light testing devices. 6.Instead of using accumulators and requiring charging, the training panel connects to a 220V AC voltage which changes to a 12V DC voltage through the internal circuit. The 12V DC voltage protects the training panel against short circuit. 7.Equipped with intelligent fault setting and appraisal system, include fault setting, troubleshooting and assessment functions etc. iii.Basic Parameter 1.Size: 1600mm × 700mm × 1700mm (length x width x height) 2.External power supply: A.C. 220V ± 10% 50Hz 3.Operating voltage: 12V DC 4.Operating temperature: -40? to +50?

i. About The Product This device is designed based on the Volkswagen Passat ABS/EBD system and with an operating principle diagram to demonstrate operation of the system. The device applies to theoretical teaching and maintenance training of the chassis structure in secondary and senior vocational skill schools, normal education and training institutions. The device can be used for structure display and operation demonstration of the ABS/EBD system. ii. Features 1.A real ABS/EBD system is used to illustrate the structure of the system. 2.A three-phase asynchronous motor drives rotation of the front and rear shafts, simulating running of the automobile. When an operator pushes down the brake pedal, the ABS/EBD system starts operating. The front and rear brake flaps keep rotating slowly. The operator feels that the brake pedal is vibrating. In this way, the device demonstrates operation of the ABS/EBD system. 3.The training bench is made of advanced aluminum-plastic plate with characteristics of not less than 4mm thick, corrosion resistance, impact resistance, pollution resistance, fireproof, and moistureproof. Its surface are processed by special craft and spraying primer. Never fade color circuit diagram and working principal diagram are painted on the board whose surface coating with varnish. The trainees can learn and analyze the working principle of the control system by referencing the diagram and the real object. 4.The training bench is installed with detection terminals to detect electric signals, for example, resistance, voltage, current, and frequency, of pins of each sensor and electronic control unit (ECU). 5.The training bench is installed with six pressure gauges to display real-time hydraulic pressure of one master cylinder and four brake cylinders. iii. Basic Parameter 1.Size: 1600mm × 1000mm × 1800mm (length x width x height) 2.Driving power supply: three-phase four-wire (three-phase five-wire 380±10% V 50 Hz) 3.External power supply: A.C. 220V ± 10% 50 Hz 4.Operating voltage: 12V DC 5.Operating temperature: -40? to +50? 6.Master oil canal pressure meter 0–250 kg/psi 7.Pressure gauge for the brake cylinder: 0–100 kg/psi 8.Transmission: ? Model: CHE100-004G/5R5P-4 ? Power: 4KW/5.5KW ? Input: AC 3PH 380 ±15% V 50/60 Hz ? Output: 9 A/13 A AC 3PH 0 – 380V 0 – 400 Hz 9.Three-phase asynchronous motor: ? Model: YT 100L2-4 ? Voltage: AC 220V/380V 50Hz ? Current: 11.8 A/6.8 A ? Power: 3 KW ? Rotation speed: 1420 r/min 10.Vacuum pump: ? Model: RD-2 ? Voltage: A.C. 220V 50 Hz ? Power: 370 W ? Pumping rate: 48 L/min ? Extreme pressure: 6.7 × 10 – 2 Pa ? Rotation speed: 1400 r/min Inlet diameter: F8 Fuel consumption: 1 L Noise: = 68

Product introduction It is made of hydrogen fuel reactor system components. It is required to demonstrate the structure and working principle of automobile fuel cell (hydrogen) system, and dynamically simulate the working process of fuel cell (hydrogen) system, in order to...

We provide Pure Electric Vehicle CHERY EQ1 Drive System Training Bench with great production line and offer fast delivery, professional team, effiective function, friendly service, technology support.