Aluminum Road Stud

YT Self-luminous Safety Aluminum Road Stud With Reflectors Self-luminous series These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee. Product Code YF27 Product name YT Self-luminous Safety Aluminum Road Stud With Reflectors Material Aluminum base +Nano-fluorescent material Color white/ yellow/ red/ green/ black Size 302.4*51.8mm Weight 118g Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance 750 (3)_.jpg750 YF27 (5)_.jpg750 YF27 _.jpg750(4)_.jpg750(6)_.jpgYF self-luminating series table of brightnessYetong road studplastic road stud_application Procedures and precautions for installation of road stud. 1.Environment: keep the ground clean, out of water and dust. The ground must be dry. 2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust. If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole. 3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter. 4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws. 5.Inspection: inspect whether the bottom is empty or not in case the glue comes out. 6.Time of solidification: it takes one day in winter and half day in summer. 12

Supplier: Aluminum solar road stud, PC solar road stud, aluminum road stud, plastic road stud, solar warning light, solar traffic sign, guardrail reflector
Services: Shipping

The road studs are retro-reflective supplements used in the road to improve visibility at night time.

1.Product size:110*80*25mm,weight:200g 1.Solar cell:poly-crystalline silicon/single-crystalline silicon(3V,75mA) 2.Storage battery:Ni-MH (900mAH)/super capacitor(22F) 3.Light source:super luminosity LED 4.LED quantity:4pcs 5.Light source color:red,green,blue,white,yellow(for any choice) 6.Luminous mode:varying type/constant type 7.Work time:more than 108 hrs for varying type,and above 24 hrs for constant type 8.Work circumstance: -25°C to +75°C? 9.Material:polycarbonate 10.IP rating:IP?67 Resist compression:>160KN 11.Service life:>5 years(Ni-MH )or >15 years(super capacitor) 12.View distance:over 800m

Road stud Road stud kt-201: size: 10.2cm(l)*10.2cm(w)*1.8cm(h) filling material: epoxy colophony crust material: abs pressure durability: 25t color of reflector: amber/white/red color of the crust: yellow/white material of the reflector: pmma/pc (either is ok) photometric values: white reflector 500 (mcd/lux) yellow reflector 300 (mcd/lux) Pakage

Supplier: Glass road stud, reflective glass bead, pu flexible post, soft pvc cone, rubber cone, aluminum road stud, plastic road stud, solar road stud, traffic mirror, rubber speed hump, traffic warning light, reflective rubber lane divider, solar traffic flashing warning light

1.Material:abs and sand 2.Size:100*100*20mm 3.Weight:270g Carton packing

1. Model No:TA-1-5B 2. Size:105*105*25mm 3. Weight:0.4kgs 4. Solar cell Type:Mono crystalline 5. Battery Type:Anti-heat Ni-MH 6. Circle life:over 3-5 years 7. Working temperature:-20c+70c 8. LED frequency:2Hz or Steady or 2Hz or at customers' request 9. Size: 5mm 10. Number:3 PCS 11. Color:White/yellow/red/blue/green 12. Luminous intensity:Over 5000 mcd 13. Control circuits:IC 14. Output on full charge (single-side):72 hours blinking lighting and 48 hours constant lighting,no sun input 15. Time to full charge:8 hours in 100Klux (sunny day) 16. Compression resistance:over 30 Tons 17. Starting intensity:500 LUX 18. Application situation:Edge line 19. Life in use:5 years 20. Warranty:1 year 21. Material of body shell:aluminum alloy 22. Material of solar panel shell:PC 23. Material of LED shell:PC 24. Material of body inside:Epoxy glue 25. Water proof:IP68 26. View distance:over 1000m. Packing:normal carton.

360 Degrees Solar Photoelectric Road Mark Model: PCB-001/PCB-002 Patent No.: ZL2009 2 0175906.1 Product features: Brand: Cityeye Power supply: 3V 315Mw PCB-001-flash/3V 480Mw PCB-002-constant , solar cells (single crystal silicon) Energy storage device: 2*1.2v/1200mAH NI-Mh high Temperature rechargeable battery Service time: Under the positive standard light intensity it is able to work for>160h(flash)/>60h(constant)Consecutively after it is charged for 8h in a single pass Display mode: 360 degree warning,Flashing (1.33HZ 5%) and constant a Display color: Red,Yellow, Blue, White and Green Displayer element: Piranha ultra bright mist-resistant LED 3500~14000 MCD Body material: slip-proof extra strength plastic PC,bottom side package by polyepoxide,resist corrosion of wateroilCCl4UVand chemical substances Visual distance: 300 M Valid Service life: 5 years Protection level: 100% waterproof Operating environment: -20~ +70ìNi-Mh-40~ +85ìsuper capacitor Start control light intensity: light illumination less than 50 Lux from the positive side Specification: 100 Diameter * 58.5 High * Cateye Diameter 60 * Pavement elevation 19mm Anti-pressure capability: static pressure 35tafter contruction,resist impact by automobile wheels Pape box: 102 * 102 * 60 mm, 1pcs/box Size of external box: 520*420*325 mm,100pcs/Ctn Weight: 343 g/pcs Net weight: 36.4 Kg Gross weight: 38.0 Kg Warranty : 14 months Superiority: Green energy saving,ease of installation, does not destroy the landscape, roads and walls can be construction,warm brightness,employs highly effcient solar panel,top of the line rechargeable batteries. Pape box: 102 * 102 * 60 mm, 1pcs/box Size of external box: 520*420*325 mm,100pcs/Ctn.