CAS No.:71-43-2
Other Names:Benzene
MF:C6H6
EINECS No.:200-753-7
Grade Standard:Industrial Grade
Purity:99%
Appearance:clear liquid
Application:Fat resin solvent and iodine, etc
color:colorless
Supplier: Chemical like mix xylene, toluene, benzene, CBFS oil
Buyer: Pet bottel, plastic scrap
Mixed Xylene CAS Number 1330-20-7 Formula C24H30 Mixed xylenes refer to the equilibrium mixture of four isomers with the same chemical formulaâ??paraxylene (PX), ortho-xylene (OX), meta-xylene (MX), and ethylbenzene. Mix Xylene appears as colorless, flammable liquids, which are of great industrial value. SPECIFICATION Density at 20�°C (g/cm3) 0.8652 Non-Aromatic (wt.%) 2.70 Color (Pt-Co) No.1 Distillation Range (�°C) 2.0 IBP (�°C) 136.7 DP (�°C) 138.7 Density at 15(�°C) (g/cm3) 0.8686 Density at 30(�°C) (g/cm3) 0.8583 Benzene Content (%wt.) < 0.01 Ethyl Benzene (%wt) 60.97 o-Xylene (%wt.) 8.18 m-Xylene (%wt.) 19.93 p-Xylene (%wt.) 7.93 Styrene (%wt.) < 0.01 MAJOR USE: Solvent for paint and pesticide., raw material for orthoxylene (phthalic anhydride), metaxylene (isophthalic acid), paraxylene (terephthalic acid) and ethylbenzene (styrene monomer). These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Polymerization product produced by Sinopec's Yan San Plant. Preferred Selling to end-users. The product is used in the production of Polyethylene.
Supplier: Purified terephthalic acid (pta), mixed xylenes, linear alkyl benzene (lab), poly vinyl chloride (pvc), caprolactam, cyclohexanone, isophthalic acid (ipa), poly vinyl alcohol (pva), vinyl acetate emulsion (vae), polypropylene (pp), polyether polyol, vinyl acetate monomer (vam), normal paraffin, linear alkyl benzene sulphonic acid (labsa), polyethylene terephthalate (pet), rubbers.
Buyer: Methanol, mono ethylene glycol (meg), naphtha, iso butanol, n butanol, aromatics, fuel oil.
Hello All, We have a 1000 MT lot of Zn crude oxides that was produced as secondary residues from a Zn smelter. Load port is Durban. Interested buyers please reach me at
Sodium 1, 2, 3-benzotriazole [cas] 15217-42-2 Properties: No toxic, no corrosive, no explosives; soluble in water, chloroform, benzene, toluene, mixed with lower alcohol and glycol in any ratio. Usage: Used as corrosive inhibitor, widely used in solar energy converting system, the cooling system of pile in nuclear power plant, cooling system of motor engine and gas engine. Used with other inhibitor, it will get better effect. Packing: Net weight 25kg in white plastic drum, Net weight 250kg in all-plastic drum
Supplier: Feedstock liquid gas, heavy end diesel blendstock, light end, dry pyrolysis gasoline dpg pygas, light naphtha, raffinate c6 non aromatic, raffinate 1 2 c4, reformate, butadiene, c3cut, c5 cut naphtha, mtbe condensate, cracked fuel oil cfo, aromatics, para xylene px, cg aromatic, hydrotreated naphtha htn, benzene, mixed xylene mx, styrene monomer sm, ortho xylene ox, heavy aromatic, base chemicals, methanol, mono ethylene glycol meg, ethylene dichloride edc, toluene di isocyanate tdi, sulphur, pta, vinyl chloride monomer, bisphenol a, acetic acid, polymer, hdpe, ldpe, lldpe, pp, pvc, pet, sbrpbr, abs, gpps hips, poly carbonate pc, fertilizer, ammonia, urea
Mould description : SGS certification 1. Steel of Cavity and core: 2738 2. Mold base: LKM 3. Cavity: 1x1Cavity 4. Mold gate way: Yudo hot runner 5. Cooling system: Enough cooling 6. Surface: Mirror polishing 7. Tolerance: 0.02mm, 2D/3D control 8. Mould life: 1, 000, 000 shots 9. Finishe time for first sample: 40 days. Key Specifications/Special Features: In order to make sure doff automatic and without any eject mark, must be arrange high Polish for this Plastic Injection Mould/Mold. This rack choose PP material, then advice choose hard enough steel 1. Customized designs, sizes and frames are accepted 2. Mould steel: NAK80 forging for cor and cav, LKM for moUld base (customized) 3. Mould treatment: Final treatment for cor and cav plates by vacuum queching to 38 to 42deg; (whole plates 0.3mm hardness) 4. Mould cavity: 1*1 5. Mould software: Choose UG for 3D design, AutoCAD for 2D drawing, mould flow for runner analyze 6. Mould size: 600 x 500mm (depends on client's machine upon changing mold size) 7. Mould fix machine: 350T on injection molding machine 8. Plastic material: PP (on normal choose PP) 9. Mould cycle time: 32 seconds/shot (without cool water when test this mold) 10. Mould doff way: Automatic by ejectors and air spring (Hasco standard) 11. Mould lifespan (minimum): 1, 000, 000 shots 12. Mould base: Copy standard mold base 13. Mould gate way: Hot runner (customized) 14. Mould packing: Standard wooden case 15. Minimum mould order should be one set 16. Mould shipment will be arranged within seven days after confirm amples and received balance 17. After product, if needs long time stay, should put oil (butter mix benzene) on the cor and cav, slider's surface prevents rust, with free spare parts during mould minimum life and technical Aegis. Features: 1) We can provide plastic mould for various parts according to your requirements 2) We own CNC processing centers, CNC spark working machinery and various advanced mould tooling equipment. We also have established a CAD / CAM / CAE mould design and development center. 3) Our quality, price, after sale services are really competitive 4) Our range covers from eletrical accessory, auto parts, household appliance, computer accessory, medical appliance, car accessory, digital&security parts ect.
CAS number: 108-32-7 Molecular Formula: C4H6O3 Molecular Weight: 104.15 Appearance and Characteristics: colorless transparent liquid; easily to be dissolved in water and be mixed with ether, acetone and benzene. It is a high quality polar solvent. Uses: PC is a high quality polar solvent. PC used in gas separation technology and battery industry. PC is especially used to absorb natural gas and carbon dioxide from petrochemical plants, and also as a fiber auxiliaries and fixing agents. Package: In new drums of 250kg net each. 20' feet container load: 80 drums = 20mt. In ISO tanks of 25mt net each.