1) USB 2.0 to IDE cable
2) Connect any device with an IDE interface to a PC with USB interface
3) Transfer rate approx. 480 Mbps
4) Complies with USB 2.0 standards
5) Backwards compatible to USB 1.1 standards
6) Complies with ATA/ ATAP-66 spe. V1.0
7) Easy to install
8) Supports IDE and enhanced IDE hard drives:
a) 2.5" laptop drives
b) 3.5" desktop drives (works with all brands, including Maxtor, Seagate, IBM
Hitachi, Samsung, Western digital)
c) 5.25" CD-Rom, CD-Rw, DVD-Rw
9) Supports ATA /ATAPI CD-Row/ R/ RW DVD-Row and more
10) External power adapter for IDE/ ATAPI devices
11) Linux compatible
12) System requirements:
a) Windows 98/98 SE/ME/ 2000/XP/ Mac OS 9.2 or higher/ Linux 2.4X
Usb 2.0 to ide cable 1) usb compatibility: fully compliant with hi-speed usb 2.0 & usb 1.1 2) transfer rate: high-speed up to 480 mbps data transfer rate (usb 2.0) 3) complies with ata/ atap1-6 4) compatible with ide drives of all capacities (supports 48-bit addressing for drive over 130 gb) 5) integrated usb transceiver 6) supports usb suspend/ resume and remote wake-up 7) supports both bus or self powered modes 8) usb mass storage class compliant with bulk specification only 9) supports multiple lun
Product:SATA & IDE to USB2.0 Cable(serial ata/pata to usb cable) PRODUCT FEATURES: 1.Portable and suitable for any SATA & IDE device anywhere. 2.Connect with two devices at the same time 3.plug and play function. 4.Supports data transfer rates up to 480Mbps 5.Supports ATA66/100/133 hard drives and compatible with Serial ATA I & II 6.Interface: SATA.IDE & USB2.0 7.rive Type: IDE -- 2.5" or 3.5" or 5.25" Optical Device SATA -- 2.5" or 3.5" Optical Device 8.Material: PC Plastic 9. O.S. Support: Windows 98SE/2000/ME/XP 10.Package: SATA & IDE to USB2.0 Cable CD Driver Switching Power adaptor 11. Power Source: External Power Adapter Input: AC 100-240V, 50-60Hz Output: DC +12V/1.5A.
This 24in dual drive IDE cable is designed to fit as a new or replacement hard drive or CD-ROM cable in almost any size of computer case. The IDE cable allows you to connect two drives as Master and Slave drives, saving the space of having to use multiple cables to connect the drives.Designed for durability and dependability, this high quality IDE cable is backed by Stccable.com's Lifetime Warranty.
Cost-effective solution for connecting a 2.5in IDE laptop hard drive to a desktop computer Easy to use and install Imaging 2.5 notebook hard drives
This 2 inch 40-Pin IDE Male to Male Gender Changer Ribbon Cable features one IDC (40 pin, Motherboard Header) Male connector and IDC (40 pin, Motherboard Header)Male connector. The cable is constructed of high quality components and expertly designed to ensure durability and reliability.Please refer to the Technical Specifications to ensure your motherboard is compatible with this product.
Wavetel Hybrid IPPBX HG100 is a Multi-function Integrated Service Switch System with All-in-one solution. It applies TDM, VoIP, advanced and soft-switch technology, and it could also be used as trunk gateway or signaling gateway. HG100 provides multiple types of interfaces including Ethernet, FXS, FXO and E1, so that it could work with IAD, PBX, analog phone, IP phone, soft phone, Fax, POS, etc. HG100 can be interconnected with third-party gateway, soft-switch or IMS through SIP and other agreements. At the same time, it can also be interconnected with PSTN or traditional PBX through SS7, PRI, etc.
Supplier: Coaxial cable, speaker cable, power cable, IDE cables, VGA cable, audio cable, ethernet cable, monitor cable, thermostat, water balancing valve, thermal actuator, flux balancing valve, motorized valve, damper actuator, motorized valve, optical fiber cable, trunk cable, microphone cable, digital room thermostat, HDMI digital audio cable
Supplier: Business telephone system, telephone, and computer cabling, ip phone systems, cat5e, cat6, fiber, networking, cutovers, racking and stacking routers, switches pos systems, low voltage, and servers
Services: Services, export and installs
Supplier: Tele Equipment
Buyer: Tele Parts