Auto Heater Core

Supplier: Auto heater core, auto heater, heat exchanger, automobile heater core, car heater core

General Description 1.PDR (Paintless Dent Removal) Series Hotbox Magnetic Induction Dent Removal System, can remove the small Dents, Door Dings and Other Minor Soft Dents on vehicles quickly and cleanly, which has a digital screen and relative control for both time and power settings. 2.No need additional and extra material,Induction Dent Removal System will remove a variety of soft and small dents easily by flameless heating the panel behind the paint from the outside of the panel, relieving the stress holding the dent and lifting the dent through induction thermal expansion, especially in hard-to-reach areas, or areas difficult to get behind. 3.It is one kind of fast, convenient and professional tool specially designed for professional PDR vehicles body shop workers, which can save time during a repair process. 4.Therefore the Induction Dent Removal System is the profitable choice for Auto Body Repairing Shop to remove the softer dent.

MODERN Series Induction Heaters carry the most advanced transduction control technology. By long distance induction, electric power is transmitted into heated conductors efficiently and the temperature of conductors is quickly up. The series is the best equipments to remove collision stress from thick metals. The heating way is direct, no fire, safety, efficient and green. It has been the best heating equipments for auto frame, chassis, connection plate, etc. before and after straightening. It avoids the hidden danger of fire heating. The heating equipments are equipped with handle torch of different shapes, so more efficient. Our SPQ-10 has air conditioning water cooling system. SPQ-06 has water cooling system. SPQ-1.5 has air cooling system and special for 4S car shop. Specification: SPQ-1.5 Dimension300mm*300mm*220mm Input Voltage2phases 220V Output Power1.5KW Tube Length6m Cooling SystemWater cooled Weight12kg Model SpecificationSPQ-06 Input Voltage1 Phrase 220V/50~60HZ Input Power 6KW Water Pump Power0.33KW Load duration rate60% Host Volume900mmX830mmX590mm Weight120KG Hand lead line /weight¦µ5.5X20CM/2KG Hand lead line extension6M Water Tank 25L Cooling systemAir Condition Water cooled Circulation Period>60Mins Wooden case

Features: 1.Fast, effortless removal of glass, emblems, bonded body components, rusty bolts and much more. 2.Flameless heat reduces the need for torches, solvents and abrasives. 3.Less flame and solvents reduces potential safety hazards and insurance rates. 4.Only heats metal objects, enabling it to be used in or near heat-sensitive areas. 5.Wide range of heating inductors for increased versatility. 6.Easy-to-read heat output meter to quickly verify induction heat. 7.Output isolation transformer provides the safest possible operation. Model: spq-1.5 Dimension: 300mm*300mm*220mm Input: /input voltage: 2phases 220v Working frequency: auto frequency locking and tracking. Output power: 1.5kw Tube length: 6m Cooling system: air cooled Working cycle: >45 minutes Weight: 12kg Model: spq-1.5 Dimension: 300mm*300mm*220mm Input: /input voltage: 2phases 220v Working frequency: auto frequency locking and tracking. Output power: 1.5kw Tube length: 6m Cooling system: air cooled Working cycle: >45 minutes Weight: 12kg

MODERN Series Induction Heaters carry the most advanced transduction control technology. By long distance induction, electric power is transmitted into heated conductors efficiently and the temperature of conductors is quickly up. The series is the best equipments to remove collision stress from thick metals. The heating way is direct, no fire, safety, efficient and green. It has been the best heating equipments for auto frame, chassis, connection plate, etc. before and after straightening. It avoids the hidden danger of fire heating. The heating equipments are equipped with handle torch of different shapes, so more efficient. SPQ-1.5 has air cooling system and special for 4S car shop. SPQ-06 has water cooling system. Our SPQ-10 has air conditioning water cooling system. It has a very high degree of efficiency and is water-cooled using a closed compressor-powered system. Through the use of automatic control monitors, the power output remains constant during the heating process. The SPQ -06/10 is designed for heavy work demanding fast and thorough heating of the material, for example, for straightening of chassis, and for coarser parts and axles. This machine is convenient for heavy-duty vehicle repairs. SPQ-06/10 Induction Heater is the top efficient equipment used for repairing heavy duty and car chassis. When using our induction heater, the temperature can be up to 600¡ãC within seconds,which can soften 5mm plate within 8 seconds and soften 8mm plate within 12 seconds. The induction heater can work over 60 minutes constantly, which can save your time and improve working efficiency with a steady performance.

MAGMA cartridge heaters are suitable, appropriate devices for applying concentrated heat to solid metal components. Cartridge heater is somewhat similar to tubular heaters structurally but with higher watt densities, usually custom manufactured to size, sheath, leads, terminals, wattage and voltage as per application or requirement. Cartridge heaters are used in restricted working areas where localized heating is required for close thermal control. MAGMA manufactures wide range of cartridge heaters for different numerous applications like heating liquids (Water, Oil and Glues), Gases such as Air and Solids such as Metal Dies. MAGMA manufactures 2 types of Cartridge heaters: HIGH WATT DENSITY Swaged or High Watt Density Cartridge Heaters composed of resistance wire (NiCr) spirally wound on MgO core as per watt density decided. It is inserted in metallic tube selected as per requirement and space filled with high purity MgO powder. Then it is swaged to compact the loosely filled powder inside for achieving high dielectric strength up to the desired size, diameter and wattage is achieved. The heat generated by resistance wire is quickly dissipated or transferred to the outer sheath. It is machined to precise tolerances and straightness. Swaged or High Watt Density Cartridge Heaters are fitted into accurately reamed, parallel sided holes for useful life and fantastic performance. It can operate at higher temperature and vibration applications. STANDARD or LOW WATT DENSITY Low Watt Density Cartridge Heaters comprises of helical coil (NiCr resistance wire) passed from refractory core and inserted in metallic tube which is predecided by size, diameter and sheath. The remaining space in the tube is MgO powder filled but not compacted by machine. The end cap is then inserted on the bottom of the heater and insulated leads are installed.

Fan Heater Pilot light Thermostatic temperature control 2 heat setting and cool air setting light weight and portable auto safety cut off thermal device protects against over heating watt:120V~1500W/230V~2000W Certified with CE/GS/ETL approval Meas.:26x15x28cm/GB 6Pcs/export carton N.W./G.W.:9.0/11.5Kgs

Cartridge heater is one of the tubular heating elements. The heating part is a nickel-chromium heat-resistant alloy wire wound on a magnesium oxide core rod with excellent insulation and thermal conductivity. Between the heating wire and the outer sheath is high-purity magnesium oxide powder as an insulating material, and the air inside is compressed by the machine Into a cartridge heater. After the main body of the cartridge heater is completed, fixed accessories or threads can be installed according to customer needs. There are many types of fixed accessories or thread structures. Please contact our sales or technical personnel for the best solution. Advantages: Small diameter, can be 3-35mm; The length is not limited, it can be 20-2000mm; The power is high, which is 2-5 times the power of the normal electric heating tube, and it can achieve a surface area of 20 watts/square centimeter; even a surface area of 60 watts/square centimeter; It has the characteristics of simple structure, high mechanical strength, high thermal efficiency, safety and reliability, easy installation, long service life, no pollution, and low price. It also saves electricity, is safe to use, can be bent into various shapes, is light, and is easy to disassemble.

Recently we developed a very compact model suitable for all the Induction applications like... Heating, Hardening, Brazing, Melting, Annealing and Shrink Fitting. Operator controls Easy to operate, no need for skilled operator, Durable and compact design, loaded with safety features, Low maintenance, easy to install and move. Adopts the latest IGBT power units and frequency conversion control techniques with high efficiency, low energy consumption and higher output. Constant current and power control function providing higher reliability, sustainability and increased productivity. Hassle-free maintenance and minimal downtime. Advanced controls with diagnostic features. Improved production values through higher melting rates with homogeneous Melting due to auto stirring technology. Product Details: Minimum Order Quantity :2 Piece Capacity :3kw Brand :FOSTER Heater Material :Metal