Continuous fatigue life: 5000 times
Pressure rating: pn0.6, 1.0, 1.6 mpa
Working temperature ¡¨¹ 200 ¡æ
Parameters of ptfe expansion joints
Nominal pressure mpa: -0.01, -0.05, 0.01, 0.05, 0.1, 0.25, 0.6, 1;
Working temperature: -50~150 ¡æ, or ¡ê¾150 ¡æ for customization
Features of ptfe expansion joints
Ptfe properties: corrosion resistance, can withstand all the strong acid (except the molten alkali metal, fluoride media and sodium hydroxide ¡ê¾300 ¡æ), strong oxidizing agents, reducing agents and various organic solvents effect;
Incombustible: limiting oxygen index ¡ê¼90;
Application: used to eliminate pipe or containers stretching or displacement caused by climate change or other reasons; or used as a snubber installed in the import and export of pump or other high frequency machinery to reduce or eliminate vibration;
Insulation resistance;
Self lubrication: has the minimal friction coefficient in plastics, is an ideal oil-free lubricating materials;
The surface is not sticky;
High and low temperature resistance: working temperature can be -190~260¡æ.
Wooden case.
Supplier: PTFE lined pipe fittings, PTFE lined valve, PTFE expansion joint bellow, glass lined reactor
Metal soft shockproof pipe Specifications: flexible, durable, bearing corroding, heating resistant, compression- resistance, installed easily Usage: air-condition instruments & apparatus, blower instruments.Technical parameter: Item no (caliber)(inch) size (mm)a(id) b( 4) d( 8) working compression(mpa) exploding compression (mpa) Ymbz10 3/8" ø9.60 20 217 1.2 4 36 Ymbz12 1/2" ø12.8 22 229 1.2 4 26 Ymbz15 5/8" ø16.0 24 250 1.2 4 26 Ymbz20 3/4" ø19.2 32 268 1.2 4 26 Ymbz22 7/8" ø22.2 37 305 1.2 3 20 Ymbz25 1.1/8" ø28.6 46 332 1.5 3.5 17 Ymbz32 1.3/8" ø34.9 51 395 1.5 3.5 16 Ymbz40 1.5/8" ø41.3 57 429 1.5 3.4 12 Ymbz50 2.1/8" ø54.0 70 524 2 3.4 12 Ymbz65 2.5/8" ø67.0 80 618 2 3.4 12 Ymbz80 3.1/8" ø80.0 87 684 2 2.7 12 Ymbz100 4.1/8" ø105.0 110 837 2 1.2 3.6
Metal soft juncture pipe Specifications: flexible, durable, bearing corroding, heating resistant, compression-resistance. Uasge: aircondition instruments, condersator apparatus, evaporator instruments, compressor appliance ect. Techincal parameter: Size: dn6mm~dn50mm Pressure: e3.5mpa Materials for corrugation pipe: sus304 Materials for the juncture: sus304, 1cr18ni9ti Length: le300mm
Water Hose Introduction: Flexible Stainless Steel hose for water are used for the tubing connection between water heater, shower, valve, and other water providers in building with advantages of anti-cautery, temperature flexibility, high pressure resistant, well-sealed, bend freely, install easily, good-looking and durable. Specification: Item No.DNMin.Bend R.-mmMax Bend timesWorking pressure-MpaThread size SL94151/23025f_1.8G1/2 SL94203/44020f_1.6G3/4 SL942515015f_1.2G1
Teflon hose assembly is mainly composed of inner Teflon hose (ideal anti-corrosion material) and stainless steel braid outside for protection and loaning pressure, with buckled metal connectors on both ends. It has the advantages of chemical corrosion resistant, anti-aging, anti-high and low temperature and electrically insulated. It is usually applied to transmit highly corrosive fluid, gas and various chemicals, fuel and lubricant or in oil, gas and hydraulic pressure system. It is widely used in many fields, such as aviation, steel, automobile, electronic industry and mechanical industry, etc. Nominal Diameter: DN10 --- 125mm Nominal Pressure: 0.8Mpa --- 2.0Mpa Working Temperature: -20ªC --- +240ªC
Metal blower soft pipe connector Specifictions: flexible, durable, bearing corroding, heating resistant, compression- resistance, installed easily. Usage: used in the air -condition instruments& apparatus, blower.
Specifiction: flexible, durable, bearing corroding, heating resistant, compression-resistance etc. Usage: gas oven, gas instruments& apparatus.
Specification: flexible, durable, bearing corroding, heating resistant, compression-resistance, torsibility, meanwhile it can reduce the noise. Type: 1. Ym-brq-10-sm30x2-r1/2 Dn10 2. Ym-brq-15-sm30x2 Dn15 3. Brq-18-sm30x2-r1/2 Dn18 Usage: gas oven & gas instruments&appartus.
Expansion joints used on ships(DN100mm) 1.DN: 8mm-10000mm 2.Material: Carbon steel, Titanium, Zirconium, Hastelloy, Nickel alloys, Duplex Steel and Austenitic Stainless Steel 3.Thickness: 0.15mm-70mm 4.Forming method: Hydraulic forming 5.Pressure(MPa):-10 to +10 6.shape: U V 7.Temp.(oC): -196 to 1400. Name Nominal diameter DN(mm) Plies Forming method Convolutions Pressure (Mpa) shape Temp. () Bellows for pressure vessel ¦µ150-¦µ4500 1-6 Hydraulic forming 1-4 -10 to +10 U ¦¸ -100 to 1250 Bellows expansion joint ¦µ8-¦µ10000 1-70 Hydraulic forming Roll forming 1-16 -10 to +10 U ¦¸ V -196 to 1400 With insulation sleeve Rectangular expansion joint(fabric) Any dimension 3-10 Press-brake forming 1-4 -0.2 to +0.2 U. Wooden case.
