Technical Data:
Make:
Double Roof Tent with mud flap all around the tent.
Size:
5 x 10 M
Area
50 sqm
Material:
Cotton water-repellent and rot proof Canvas.
Color:
Olive Green Color.
Specifications:
Outer Roof Height: 3.25 M (approx)
Inner Roof Height: 3.00 M (approx)
Wall Height: 1.80 M (approx)
Doors:
2 Doors; each door is provided with interlacing system for Opening & Closing
& Velcro for sealing at sides.
Windows:
8 Windows; each window is provided with rolled up flap & velcro for sealing
at sides.
Accessories:
Iron Pole, Iron Pegs and Iron Hammer.
Packing:
In strong bags tied up with strip & carrying handles.
Technical Data: Make: Single Layer Tent with mud flap all around the tent. Size: 6 X 13.7 M Area 82 sqm Material: Poly Cotton water-repellent and rot proof Cotton Canvas. Weight 550 gsm. Color: Natural Color. Specifications: Central Height: 3.0 M (approx) Wall Height: 2.0 M (approx) Doors: 1 Door; each door is provided with interlacing system for Opening & Closing & Velcro for sealing at sides. Windows: 12 Windows (six each of long side); each window is provided with rolled up flap & velcro for sealing at sides. Accessories: Iron Structure Frame, Iron Pegs and Iron Hammer. Packing: In strong bags tied up with strip & carrying handles.
Supplier: Tents, refugee tents, relief tents, emergency tents, military tents, camping tents, hajj tents, general purpose tents, UNHCR relief tents, Mongolian yurt, Mongolian round tents, tarpaulins, canvas tents, relieve tents, relieve shelter, emergency shelter, polyester tents, car ports
SINGLE FLY: Made of two folds of cloth. OUTER FOLD: 100% Cotton Canvas Dyed Waterproof. INNER FOLD: 100% Cotton Dosootie Grey/Dyed. DOUBLE FLY: OUTER FOLD: Single Fold of 100% Cotton Canvas Dyed Waterproof. INNER FLY: Two Folds of 100% Cotton Dosootie Cloth dyed. Complete with Accessories SIZES: 10 X 10 Feet, 12 X 12 Feet, 14 X 14 Feet
APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.
Epoxy Finish Paint is two-component, polyamide adduct cured, General Purpose Air drying Epoxy Coating. Its Excellent substitute to Enamel.
General Purpose Wood Varnish Fast Dry
General Purpose Thinner (Diluent) Thinner For Cleaning Tools
Supplier: Generator canopy, acoustic panels, generator, DG set, fabricated industrial acoustic panels, acoustic walls, acoustic barriers, acoustic wall panels
Buyer: G.I.Sheet, glass wool, rock wool, generators, ms pipe, aluminum sheet
General Purpose Wood Varnish UV
