Calibration Gases, Uhp Gases. Gas Mixtures

Cylinders for balloon application for filling helium are available in three sizes: 7.1 L, 13.4 L, 27.4 L. Our Helium cylinders are DOT39 approved. They come in 5ply cartons with customised graphics based on the customer's requirement.

Freon M059 R-417A Refrigerant Gas 25lb / 11.9 kg US Origin Chemours ISCEON MO59 (R417A) is an HFC retrofit refrigerant that is cost-effective and ozone-friendly, used to retrofit equipment that uses R22, such as air conditioning (AC) and medium-temperature commercial refrigeration systems. Applications: Residential and commercial air conditioning systems. Note: For water-cooled systems, MO29 is recommended. Medium temperature refrigeration, commonly used in commercial units, including food service, supermarket display cases, and food storage/processing. Benefits: Efficient and cost-effective retrofits. Ozone-friendly, does not harm the ozone layer. In most cases, no need to change lubricant type during the retrofit process; compatible with traditional and new lubricants. No need to replace existing equipment. After the retrofit, MO59 can be topped off without needing to drain the refrigerant. Advantages: Lower discharge temperatures compared to R22, which can extend compressor life. Provides the necessary cooling capacity in most systems. Proven to save energy in some systems. MO59 is an ozone-depleting substance (ODS) with zero ODP (Ozone Depletion Potential) and is not subject to phase-out under Montreal Protocol regulations. Recommended lubricants: Mineral Oil (MO), Alkylbenzene (AB), and Polyol Ester (POE) â?? in most cases, no lubricant change is required during the retrofit process.

Product Name: Wholesale Refrigerant Gas (R134, R410, R404, R32, R11, R407) Available Refrigerants: R134a: Commonly used in automotive air conditioning, refrigeration systems, and centrifugal chillers. Eco-friendly with zero ozone depletion potential (ODP) and lower global warming potential (GWP) compared to older refrigerants. R410A: The preferred refrigerant for modern air-conditioning systems, especially heat pumps. Higher pressure and efficiency than R22, making it a more energy-efficient option. R404A: Widely used in commercial refrigeration systems, including freezers, coolers, and refrigerated transport. Efficient in low and medium temperature applications. R32: A next-generation refrigerant known for its low GWP. High energy efficiency and commonly used in residential and commercial air conditioning systems. R11: Historically used in large-scale industrial chillers but phased out due to its high ODP and environmental concerns. R407C: Zeotropic blend used as a replacement for R22, primarily in residential and commercial air conditioning systems. Suitable for medium and high-temperature applications. Key Features: Eco-Friendly Options: Low GWP and zero ODP refrigerants available for environmentally conscious applications. Versatile Applications: Suitable for automotive, commercial refrigeration, air conditioning, and industrial cooling systems. High Performance: Each refrigerant offers reliable cooling for different system requirements, from residential use to industrial applications. Why Choose Us? We offer bulk quantities of refrigerant gases at wholesale prices, providing fast shipping and customized packaging options. Our refrigerants meet international safety standards and are tested for quality, ensuring reliable performance for your cooling systems.

R-123 Refrigerant (Hydrochlorofluorocarbon) Overview: R-123 was specifically developed as a replacement for R-11 in low-pressure centrifugal chillers. It is widely used in modern systems engineered with the correct materials and sizes to meet specific cooling needs. However, retrofitting existing R-11 chillers to R-123 may require replacing certain components like seals, gaskets, and other system parts to ensure proper operation and avoid leaks. Key Features: ASHRAE Safety Rating: R-123 has an ASHRAE rating of B1, meaning it has low toxicity but requires more stringent safety measures. Lower personal exposure levels are allowed during normal daily operation, but machinery rooms must follow specific requirements as per ASHRAE Standard 15 (Safety Code for Mechanical Refrigeration). Retrofitting Considerations: When converting from R-11 to R-123, modifications may be necessary, including the replacement of gaskets and seals to achieve optimal operational conditions and leak prevention. Low-Pressure Performance: R-123 is optimized for low-pressure centrifugal chiller systems, providing efficient cooling and performance in large industrial and commercial applications. Safety Requirements: Personal Exposure: Extra precautions must be taken due to the B1 rating, which permits lower exposure levels during service and daily operation. EPA Certification: An EPA certification card is required to purchase R-123 or any other CFC and HCFC refrigerants, in compliance with environmental safety regulations. Applications: Low-Pressure Centrifugal Chillers: R-123 is primarily used in large industrial and commercial systems, providing efficient cooling in these specialized environments. Retrofitting R-11 Chillers: It serves as an effective replacement for R-11, though retrofitting may require careful modification of existing systems.

Product Name: R11 Refrigerant Gas (Dichlorofluoromethane) R11, also known as dichlorofluoromethane, is a chlorofluorocarbon (CFC) refrigerant that was once widely used in air conditioning and refrigeration systems. Its primary applications included large-scale cooling systems, such as centrifugal chillers in commercial and industrial environments. Key Specifications: Chemical Name: Dichlorofluoromethane (CFC-11) Class: 1 (Chlorofluorocarbon) Applications: Air Conditioning Systems: Historically used in large, industrial air conditioning systems. Refrigeration Systems: Utilized in refrigeration systems that required large cooling capacities. Centrifugal Chillers: Most commonly found in older centrifugal chiller systems.

MAP Pro Gas (Propylene) Specifications: Purity: 99.5% Propylene Total Gas Content: 400g (14oz) per cylinder Cartridge Pressure: 1.85 MPA Burning Temperature: 1327C (base temperature) Maximum Burning Temperature: 1368C Burning Time: 200 minutes per cylinder Combustion Residue: Low, with a residue value of 2 Applications: Brazing and Soldering: Commonly used for HVAC, plumbing, and automotive applications. The high flame temperature allows for quick and efficient metal bonding. DIY and Professional Use: Excellent for home projects or professional work requiring high-heat applications, including light welding, brazing, and copper pipe soldering. Metalwork: Can be used for joining copper, steel, brass, and other metals, making it a versatile choice for small to medium-scale projects. Benefits: Higher Heat Output: With a maximum temperature of 1368�°C, MAP Pro gas is hotter than standard propane, making it suitable for tasks that require intense heat. Quick and Efficient: Burns hotter and faster, reducing brazing time and ensuring quicker project completion compared to standard propane. Portable and Convenient: Lightweight cylinders that are easy to carry and store, making it ideal for on-site work. Safe and Reliable: Colorless and non-turbid gas for clean and reliable combustion. It also provides consistent pressure for steady performance. Packaging: Cylinders: Each cylinder contains 400g (14oz) of gas. Cartons: Typically packed in 12 cylinders per carton. Container Capacity: 17,088 cylinders per 20ft container.

Product Name: BLUEFIRE Modern MAPP Gas Original MAPP Substitute Product Description: BLUEFIRE Modern MAPP Gas is the only true substitute for the original MAPP gas, offering a hotter burn compared to standard propane with lower gas pressure. Our product features a patented formula that provides superior performance in brazing, welding, and other high-temperature applications. With 14% more fuel content per cylinder (16.1 oz) compared to other popular fuel gas products on the market, you can expect longer burning times and better efficiency. Key Features: Patented Formula: Closest performance to original MAPP gas, with a higher burning temperature and lower gas pressure than standard propane and 99.5-100% propylene products. 14% More Fuel: Each cylinder contains 16.1 oz of fuel, providing up to 30-45 minutes of extra working time. Longer Burn Time: Proven in lab tests to offer extra working time compared to other fuel gases. Certified Safe: All gas containers are manufactured under USA DOT and Canada TC Certification, ensuring compliance with North American safety regulations. Versatile Use: Ideal for brazing, welding, HVAC, plumbing, and automotive projects that require high temperatures. Applications: Brazing and Welding: Perfect for HVAC, plumbing, automotive, and DIY projects requiring high temperatures. Food Processing: Ideal for chefs who want to avoid the residual odor left by propane in food applications. HVAC and Plumbing: Suitable for heat-intensive applications, providing high performance with precise temperature control. Buying Guide: Fuel Content: Butane: Low temperature and pressure, suitable for lighters and stoves. Propane: Medium temperature and high pressure, used in small-scale projects like soldering and cooking. Camping Gas: Mixture of butane and propane, designed for outdoor use, especially in high-altitude environments. MAP/PRO: High temperature and pressure, suitable for brazing and welding, typically comes in yellow bottles. BLUEFIRE Modern MAPP: Offers similar or higher temperatures than MAP/PRO, with lower gas pressure and more fuel content per bottle, making it the best choice for temperature-critical projects. Why Choose BLUEFIRE Modern MAPP Gas? Hotter and Longer Burn: Outperforms standard propane and other substitutes with a higher burn temperature and longer usage per bottle. Environmentally Conscious: Our patented formula provides superior performance with lower gas pressure, making it safer and more efficient. Certified and Safe: One of the only two products that comply with federal regulations for safe transportation and distribution in North America. Packaging Options: 16.1 oz Cylinder: The most fuel content per bottle in the market. Available in single units or bulk for larger projects.