Protein based foaming agent for cellular lightweight concrete clc
Specifications:
Particulars Addage clc fa
Appearance Brown liquid
Sp. Gravity 1. 15-1. 20
Ph at 20c 6. 5 - 7. 5
Foaming agent (dry density 750 kg/m3) 1. 1.25 ltr (diluted in 40 parts of water)
2. Dilution ratio vary 1:30 to 40.
25kg, 50kg, 250kg
Supplier: Chemical products fluid division & plant engineering division refrigerant, agent foam, propellent, HFC mixture, DME, R600A, R290, cyclopentane, pentane, extrusion plastic material, refrigerant, aerosol, PU, XPS, PE
Supplier: Building material, construction material, foam concrete machine, mixer, foaming agent
Supplier: Waterproof material, high pressure injection machine, grouting pump, pu foaming agent, epoxy resin
Supplier: Construction chemicals, foaming agent, curing compound, shuttering oil, es, wall putty, admixture and plasticizers, tile fixing solutions, water proofing, industrial products, high tech coatings
Coverage: 3.5 to 5 m²/kg depends on concrete Specific gravity at 30°c :- 1.75 Application temperature :- 5 °c to 45°c Drying time :- approx 2 hrs at 30°c 250ltr
Supplier: Adhesives, pu adhesive, water base adhesive, solvent base adhesive, contact adhesive, anti foaming agent , silicone oil base, mineral oil base, silicone & mineral oil base, dispersing agent, anti freeze coolant, anti scallant, amine catalyst polyurethane, polyurethane dispersion water proofing mambrane, styrene acrylic, two component sealants
Buyer: Butyl acrylate, 2eha, ethyl acrylate, vam styrene monomer
Supplier: Tile glue, tile grout, sealer, color hardener, bonding agent, release agent, clear coat, foam fix, color plaster, water proof grout, water proof marble glue antique plaster
The products produced by the DHC to meet minimum standards for the Bloc lightweight concrete is made from a mixture of cement, fine aggregate, or foaming agent used for the gas bearing structure, bearing the thermal insulation in buildings under TCXDVN 316-2004 and are checked by TCXDVN 317-2004 (for foam concrete) and ISO 7959:2008 - applied to the blocks air, solidifying the general conditions apply (referred to as AAC), used for construction.
The FOAMCEM light weight cellular concrete is obtained mixing liquid cement grout, or sandcement grout, with the foam made from our foaming agent foamcem.By this system a structure of closed air bubbles is formed into the mix and this fact takes an high insulating power and lightness to the material.Foamcem technology allows, varying the foam-cement-sand ratio, to obtain light weight cellular concrete with a density from 300 to 1.600 kg/m3 according to requirements. Packaging: metal drums 230 kg net weight. Consumption: kg 1, 5-2 cubic meter of cellular concrete depending on the density produced.
