E1 Fiber Optical Modem

Overview: contact: amily[at]veecom dot com dot cn FME-2 provides two interfaces of E1(g.703) or V.35, and the rate to every transmitting channel of E1 or V.35 can be up to 2Mbps. It was made by ASIC circuitry technology, we can also call it " PDH" Feaures: FME-2 is high-speed fiber optic modem with two E1/V.35 interface optional. The two interfaces of FME-2 can be V.35 or E1 (G.703), and also one can be V.35, another is E1 (g.703). The data transmitting rate is from N*64K (N=1-31) to 2048 Kbps. The clock is optional internal, external and slave. To achieve point to point testing, FME-2 can process the diagnosis of some troubles though the switch AL, DL and RL. There are many indicators LEDs on the panel to display work state, such as PWR, RXD,TXD, SYNC, TEST... E1 (G.703) interface comply with ITU-T G.823, G.703 and G.742, it can be impedance balance120ohm (RJ45) or unbalance 75ohm (BNC) The requirements to the fiber can be single mode/multi mode, single core/double core, SC/FC/ST, 2km/20km/40km/60km Power supply: AC 220V or DC -48V. DIMENSIONS: 240mm*215mm*50mm (L*w*H)

Fme(fiber optic modem) Detailed selling lead description Fme is high-speed fiber optic modem with remote configuration based on asic circuitry technology. It supports user-selectable rates between n*64kbps (n=1--31) and 2048 kbps. The fiber interface is sc (single module).Transmission distance is up to 60km. The product fully conforms to part 15 of fcc regulation. With remote configuration, the fme rate of user terminal follows the configuration of the fme of master terminal automatically without any other setup. Data interface of fme can be v.35/v.24/rs232 or g.703. E1 rate supports framed mode and unframed mode, which are known as n*64 kbps (n=1--31) and transparent 2048 kbps. External clock, internal clock, and slave clock are supported. With the function of integrated diagnosis, it can perform tests of local analog loop back and remote digital loop back to achieve end-to-end integrity test. Detailed product description Feature: 1) fiber optic modes: 8.3/125mum, 8.7/125mum, 9/125mum, 10/125mum, single module 2) transmission distance: 0-60km 3) fiber optic interface: sc 4) length of working wave: options: 1, 310nm, 1, 550nm 5) transmitting electrical level: 0~6dbm 6) receiving sensitivity: -36dbm 7) decaying: 1, 310nm window0.4db/km, 1, 550nm window 0.25db/km 8) data interface: v.35 mode: fmve, g.703 mode: fmge 9) data rate: n*64kbps (n=1 - 31); 2, 048kbps 10) transmission mode: synchronous 11) line interface: bnc; rj45 12) transmission features: conforms to g.703 13) clock: line clock, external clock, internal clock 14) test methods: local analog loop back test and remote digital loop back test 15) dce interface v.35 or v.24/rs232c 1) power supply: 220vacf+10%, 50hz; 48vdc(optional) 2) power consumption: 5w; 3) dimension (l x w x h): 225 x 145x 40mm, 9" x 5.8" x 1.6" 4) temperature: 0 - 40fpc 5) humidity: 0~95%

Supplier: Networking lan cables, coaxial cables, fiber optic, routers, modems, switches

Contact: amily[at]veecom dot com dot cn GPRS200 MODEM as a standard RS232c interface, result in widely extending the applicable fields of GPRS. It can be applied in the desk computer, notebook computer and other control system terminal. It has a highly frequency stability. PRODUCT FEATURES: Always on-lined and high-speed connection. Easily installation: Neednf+t any driving program. It can be dialed-up using RS 232 interface with common modem. DualBand GSM/GPRS modem (EGSM900/1800MHZ,900/1900MHZ) designed for gprs Networkf=Data faxf= SMS and voice application. Transmitting speed: 115.2K BPS (theoretical), 30f¼50K BPS (under the CHINA Mobile network) Channel spaces: 200Kpbs Stability of frequency: 0.1ppm Operating temperature:-20ºC--+60ºC Storage temperature: -30ºC--+85ºC Humidity: 98% Vibration(non working): 25g. Operating power: 15mA INTERFACES RS-232C and audio through mini sub-D 9-pin connector supporting: Remote control by AT commands(GSM07.07 And 07.05) Audio use a stereo earphone connecter antenna interface 50 ohm MMCX connecter LED indecter SMA Sliding SIM holder(3V/5V SIM interface) Antenna vonnector 6V-15V DC POWER SUPORT OPERATION SYSTEM DOS,WINDWS 9X,ME,NT,2000,XPf=LINUXf=UNIXf=POCKET PCf=MAC APPLICATION: Remote controller, Integrating system. DIMENSIONS: 100x54x25mm WEIGHT: 200g.

Supplier: Fiber optic products such as media conveter, video converter, fiber cable, patch cord, pigtail, connector, adapter, attenuator, pdh multiplexer, optical modem, video converter
Services: Oem

Adsl modem Overview The adsl ld-4202 is a high speed adsl2+ modem, combined an all-in-one adsl switch, usb, ethernet. The adsl ld-4202 supports adsl, adsl2 and adsl2+ over the existing copper lines, with downstream transmission rate up to 24mbps (adsl2+) and upstream transmission rate up to 1.024 mbps. They can support pppoa (rfc 2364 - ppp over aal5), pppoe (rfc 2516 - ppp over ethernet) and rfc 1483 encapsulation over atm (bridged or routed). The adsl ld-4202 is capable of establish 2 connections at the same time with ethernet interface and usb interface respectively. It can provide the users over its usb or ethernet interface to share broadband access to the internet. Visual indicators: 1 status leds: power, adsl, lan, rxd, txd Environment: Operating temperature: 0ª~40ªc Storage temperature: -40ª~85ªc Humidity: 10%~90% Certification: Ce, fcc

Supplier: Industrial communication products, products mainly include industrial wireless router, industrial switch, industrial wireless access point, 4g\5g router and other equipment
Services: Oem & odm

Msdsl(2wire g.Shdsl modem adsl) Detailed selling lead description Features: 1) msdsl is fpga-based 2-wire 2304kbps modem 2) according with itu g.Shdsl standard, with best concocting technology and very good frequency spectrum compatibility 3) has 3.5 - 9.7km transmission distance in special lines with 24awg (0.5mm) and 26 awg (0.4mm) 4) can be used in every high-grade and high-speed telecoms operation such as transmitting voice, data and images 5) also supports n x 64kbps rate (n=1~32) of interface of v.35, e1(g.703) and ethernet. Msdsl has strong supervisory control function Detailed product description Features: 1) line interface 2) fully conforms to standard of ydn 056-1997 3) transmission rate: n x 64kbps + 8kbps (n=3~36) 4) code: pam16 5) line impedance: 135 ohm 6) signal electrical level: +13.5 +/- 0.5 dbm 7) line wire interface: a pair of passive twisted-line, rj45 8) code error rate: f_10 - 9 9) transmission distance without linkup: 3.5~9.7km (0.4~0.8mm wire size) 10) data interface 1 (e1 interface) feature 11) transmission rate: n x 64kbps (n=1~32) 12) line coding: hdb3 13) line impedance: 75 ohm/120 ohm 14) interface standard: conforms to ccitt g.703 standard 15) data interface: (v.35 / v.24) 16) transmission rate: n x 64kbps (n=3~36); v24 (64k; 128k) 17) work mode: dce 18) work circumstances 1) power supply: 220vacf+10%, 50hz; 48v dc (optional) 2) power consumption:

Length: 50cm Connector 1: Slimline SFF-8654 8i 74pin Connector 2: Dual SFF-8643 Mini SAS HD Applications for Servers, Data Storage, Workstations Meet PCI-e Gen3 4 and SAS4.0 specification