* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
T-pav903 serie: valve body:stainless steel, valve connection:screwed, valve way:2/2 and actuator double acting or single acting types.
Da:actuator double acting , sr:actuator single acting .
Application:water, air, hot water, steam, oil, aggresive media, gas, foot industry, chemical industry,
Tork actuator features body extruted.Aluminium, hard anodized
Caps die cast aluminium, electrostatic painted
Pistons die cast aluminium
Supp.Air 4-6 bar
Ball valve body full borei, aisi 316 stainless steel and 3 parts body
Way: two way.
O-ring ptfe
Pressure suitable low and high pressure.
Temperature -20....140 c degree
Working pres. Pn 40 bar(1/2"..11/4") , 16 bar(11/2"...3")
Test bntnall valves are tested 48 hour, at 20 barda
Electric Actuated Gate valve Manufacturer in Germany
Are you looking for the best Electric Actuated Gate Valve Manufacturer? Valvesonly Europe is one of the leading Electric Actuated Gate Valve Manufacturer in Germany. An electric actuated gate valve is a type of gate valve that is powered by an electric motor to control the flow of fluid. The electric motor is connected to the valve stem, which controls the movement of the gate or wedge in the valve.
The electric actuator can be controlled by a control signal to open or close the valve as needed. The valve position can be monitored by a feedback device, such as a limit switch or positioner, which sends a signal to the control system indicating the valve's current position.
Valvesonly Europe is the leading Electric Actuated Gate Valve Manufacturer in Germany and are available in a variety of materials, including cast iron, stainless steel, and alloy steels, and can be used in a wide range of pressure and temperature applications.
Advantages of Electric Actuated Gate Valve:
It is suitable for both above ground and underground installation.
The closing feature of this valve is exceptionally good.
These valves can be used in a circuit both ways.
Pressure loss is minimum
Industries of electric actuated gate valve:
Petrochemical
Refineries
Process plants
Oil and gas
Description:
Body Material: Cast Iron, Ductile Iron, 316L, SS304, SS316, CF8M, SS316L, SS904L,WCB, WCC, WC9, WC6
Size: DN15 to DN700
Pressure: PN10 to PN450,150 to 2500
End: Flanged, Socket weld, Butt weld.
Operation: Electric actuated.
Electric actuator details-
Torque 3 9 nm
Operating pressure- 8 Bar
Port Connection-NPT1.4
Mounting Base-ISO5211
Temperature--20 C - +80 C
Electric Actuated Gate valve Manufacturer in Germany
Are you looking for the best Electric Actuated Gate Valve Manufacturer? Valvesonly Europe is one of the leading Electric Actuated Gate Valve Manufacturer in Germany. An electric actuated gate valve is a type of gate valve that is powered by an electric motor to control the flow of fluid. The electric motor is connected to the valve stem, which controls the movement of the gate or wedge in the valve.
The electric actuator can be controlled by a control signal to open or close the valve as needed. The valve position can be monitored by a feedback device, such as a limit switch or positioner, which sends a signal to the control system indicating the valve's current position.
Valvesonly Europe is the leading Electric Actuated Gate Valve Manufacturer in Germany and are available in a variety of materials, including cast iron, stainless steel, and alloy steels, and can be used in a wide range of pressure and temperature applications.
Advantages of Electric Actuated Gate Valve:
It is suitable for both above ground and underground installation.
The closing feature of this valve is exceptionally good.
These valves can be used in a circuit both ways.
Pressure loss is minimum
Industries of electric actuated gate valve:
Petrochemical
Refineries
Process plants
Oil and gas
Description:
Body Material: Cast Iron, Ductile Iron, 316L, SS304, SS316, CF8M, SS316L, SS904L,WCB, WCC, WC9, WC6
Size: DN15 to DN700
Pressure: PN10 to PN450,150 to 2500
End: Flanged, Socket weld, Butt weld.
Operation: Electric actuated.
Electric actuator details-
Torque 3 9 nm
Operating pressure- 8 Bar
Port Connection-NPT1.4
