Stainless Steel Knitted Wire Mesh Product Description: Knitted wire mesh is typically made from a single or double wire that is knitted to form a spring like & flexible wire mesh of interlocking loops much like hockey socks or sweaters are made. Mono-filament knitted mesh is the simplest type, which can be used in the common applications and the multi-filament knitted mesh has higher strength, which can be used in the heavy duty applications.Knitted Wire Mesh is a high strength and flexible material that has unlimited uses and applications in many industries. Stainless steel knitted wire mesh is produced by special weaving machines, use stainlesss steel wire as raw material, knitting monofilament or multifilament wire into a tubular form. Then the wire mesh be flattened to mesh rolls, and can be also supplied in corrugated (crimped) form. Stainless steel knitted wire mesh are most commonly used in the filtration,separation industries and EMI & RFI shielding industries. Materials: 200 series: Grade 201 (1.4372), Grade 202 (1.4373) 300 series: Grade 304 (1.4301), Grade 316 (1.4401), Grade 321 (1.4541) 400 series: Grade 410 (1.4006), Grade 420 (1.4021 ), Grade 430 (1.4016) Advantages and benefit of stainless steel knitted mesh: Corrosion resistance. Alkali and acid resistance. Rust resistance. High temperature resistance. Excellent shielding performance. Outstanding filtering efficiency. Durable and long service life. Feature: Stainless steel knitted wire mesh offers excellent property such as corrosion resistance, alkali and acid resistance, long service life, rust resistance and heat resistance. Application: Stainless steel knitted mesh has excellent shielding performance. It can be used in the cable shields as a chassis grounding and electrostatic discharge. Stainless steel knitted mesh can be installed onto the machine frames for EMI shielding in military electronic system. It can be made into knitted mesh mist eliminator for gas and liquid filtration. Stainless steel knitted mesh has outstanding filtering efficiency in various filtration device for air, liquid and gas filtration.
This type woven mesh grill for car front grilles is made out of stainless steel wire 304(extremely resistant to rust, corrosion, and stain) with crimped woven style or not crimped style, diamond opening and regular opening. The crimp style is evenly crimped in warp and weft, providing a rigid construction. The wires are under crimped and sprung together thus giving a tight mesh. High quality stainless steel wire mesh is the perfect solution for automotive car grilles. They are beautiful and protect your car radiator from flying rocks and debris. Specification: Raw materials: stainless steel wire. Finish: powder-coate d or chrome. Color: bright, black. Woven style: not crimped or crimped. Grill mesh size: 6 inch 36 inch, 6 inch 24 inch, 16 inch 36 inch, 16 inch 48 inch, 24 inch 24 inch, 12 inch 12 inch, 12 inch 48 inch, 12 inch 40 inch, 12 inch 42 inch, 18 inch 24 inch, 18 inch 48 inch, 48 inch 72 inch , 24 inch 72 inch, 24 inch 72 inch, 36 inch 48 inch, other sizes also can be cut. Shipped in flat sheet or rolled.
Our Quality IBC liner steel cage WIRE MESH FOR IBC TANK FRAME are great steel cage mesh for IBC Frame for use in Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Other, Advertising Company. The Core Components Includes PLC, Engine, Bearing, Gearbox, Motor, Pressure vessel, Gear, Pump
Aluminum woven wire mesh Aluminum is largely considered the most popular non-ferrous metal in the world, and as such, aluminum alloys are commonly used in the wire mesh industry. Aluminum alloys are composed primarily of aluminum, and also contain other elements like copper, magnesium, manganese, or silicon. Aluminum woven wire mesh is lightweight; in fact, a good rule of thumb is that, when compared to its stainless steel counterpart, aluminum mesh is approximately 1/3rd the weight of stainless. Aluminum wire mesh is also corrosion resistant in most normal environments but will corrode quickly in the presence of alkaline solutions and hydrochloric and hydrofluoric acids. With an estimated melting point of 1218, aluminum has many benefits, including a relatively low cost compared to other meshes. Aluminum woven wire mesh is a popular choice for a wide array of industries including aerospace and automotive, as well as marine and electrical conductivity applications.
Anping Tenglu Metal Wire Mesh Co.,LTD 310 Stainless Steel Wire Mesh Screen Product Description: Often referred to as 25-20 stainless, 310 SS wire mesh is suited for applications requiring high strength and excellent oxidation resistance. The maximum safe temperature is about 2000 F, but is successfully used up to 2100 F under certain conditions. Preforms well under intermittent heating and cooling. Type 310 also referred to as T-310 or T310 is nonmagnetic when annealed or cold worked. Well suited where a combination of strength, toughness, corrosion and oxidation-resistance is essential. 310 stainless steel wire mesh/screen is austenitic material used for high-temperature applications. The high chromium and nickel contents give the steel excellent oxidation resistance as well as high strength at high temperatures. This grade is also very ductile, and has good weldability enabling its widespread usage in many applications. Grade 310S stainless steel wire mesh/screen is the low carbon version of Grade 310 and is suggested for applications where sensitization, and subsequent corrosion by high temperature gases or condensates during shutdown may become problem. Materials:Stainless Steel 310/310S Feature: 310S stainless steel(2520), due to high content of Ni and Cr, it is with good oxidation resistance, corrosion resistance, acid and alkali resistance, high temperature resistance Application: 310 stainless steel wire mesh screen is often used for welding rod, furnace parts, aircraft and jet engine parts, oil refinery and chemical processing equipment, heat exchangers and strainers.
Material : Stainless Steel Wire Type : Welded Mesh Application : Woven Wire Mesh Weave Style : Plain Weave Wire Diameter : 0.5-8mm Technique : Welded Mesh Brand Name : SAKAGUCHI Surface : Smooth Color : Bright & Shiny Characteristics : Corrosion resistance Certification : ISO 9001:2008
High Carbon Steel Wire Mesh The diameter range of them is from 0.25mm to 16mm. Features: High tensile strength Light weight Highly resistant to abrasions and wear & tear Portability Rigid construction sion Ability to withstand extreme temperature High Carbon Steel Wire Mesh is extensively used in industry for various applications such as separation, filtration, grading, sizing, crushing and shifting. It is applicable for a variety of materials, ranging from minerals, stones, construction materials, ceramic and food items. Due to its rigid design and excellent protection against abrasions, it is highly suitable for processing heavy abrasive materials like ores, crushed stones, sand and gravel coal. High Carbon Steel Screen Mesh Weaving style: Plain weave/Double crimped/Intermediate crimped/Flat top crimped Mesh type: Square /Rectangular slot/Long slot Screens feature : \Wire:0.71mm - 12.5mm Mesh aperture:1mm - 100mm
Anping Tenglu Metal Wire Mesh Co.,LTD Stainless Steel 304 Heavy Gauge Welded Mesh Product Description: Heavy gauge stainless 304 welded wire mesh can be used across many industries, for example, in health care, pharmaceutical, food and catering industries etc. Heavy wire stainless 304 mesh can be used in as hand railing and balustrade infills, racking and storing, rearing cages and pet enclosures etc. Heavy wire of 2.5mm or less is available Materials:ss304 Packaging :Wooden box Our Service: Materials certification Customized size Specifications: 1/2" x 1/2" x 10g (13 x 13 x 3.0mm) 1/2" x 1/2" x 12g (13 x 13 x 2.5mm) 1" x 1" x 10g (25 x 25 x 3.0mm) 1" x 1" x 12g (25 x 25 x 2.5mm) 1 1/2" x 1 1/2" x 10g (38 x 38 x 3.0mm) 2" x 2" x 10g (50 x 50 x 3.0mm) 2" x 2" x 12g (50 x 50 x 2.5mm) 3" x 1/2" x 10g (75 x 25 x 3.0mm) 3" x 1/2" x 12g (75 x 12 x 2.5mm) 3" x 1" x 10g (75 x 50 x 3.0mm) 3" x 3" x 10g (75 x 75 x 3.0mm) 1 1/2" x 1 1/2" x 12g (38 x 38 x 2.5mm) 3" x 3" x 12g (75 x 75 x 2.5mm)
Materials: carbon steel and stainless steel (302,304,304L,316,316L etc). Characteristics:The welded stainless steel water well screen is made up of rods and warp. The rod can be round wire, triangular wire or trapezoid wire. The warp is triangular wire (V-shaped wire). Water well screens have a structure and high open area, as well as accurate slot dimension. At the same time, water well screen have heat-resisting, anti-corrosive, good machine capability, last long, safety and reliability and so on characteristics. It can be used in many kinds of medium filtering. Uses: The strainer is a kind of filtered water tubing with the perforation .it can use with the deep well pump, dive the water pump, also may use in the water-treating equipment, the environmental protection, the sea water transforms into the industrial water and life use water desalination treatment, running water treatment, water softening treatment, the petroleum industry: The petroleum product terminal filters and the chemical acid, the alkali liquid filters, the ethyl alcohol and so on the organic solution recycling filters. Continuous slots significantly increase discharge area,thus providing greater access to water-bearing zone . We can produce this pipe with diameter 80mm-550mm ,slot size 0.1mm-10mm,length 50mm-5850mm .
