The RuiDa technology the RDC6332G controller most remarkable characteristic:
1st, the ethernet (10/100M) and the USB2.0 transmission (the transmission speed is above RDLC320-A product 3 times.);
2nd, the real color TFT screen, can demonstrate the real color on the kneading board the processing graph, simultaneously can on the kneading board the accurate learning laser processing coordinates position;
3rd, can in advance look at the document graph on the kneading board which in the memory preserves, it brushes the screen speed, domestic manufacturer nobody can and;
4th, dynamic demonstration path processing advancement and fiducial mark;
5th, can in operate on the kneading board to revise each chart level directly the processing parameter (for example: The speed, the power and so on), after simultaneously can preserve automatically the revision chart level parameter, prepare the following use (this function other manufacturers to be unable to realize.);
6th, formidable mouse operation support.(Can directly carry on the operation in ours operation kneading board with the mouse, this function other manufacturers are unable to realize, simultaneously this function overseas customer likes extremely.);
7th, the support power failure continues carves, the man-hour looks at in advance (as precisely as a millisecond level, the man-hour in advance looks at the value and the practical work consumes the time to be completely consistent, this function other manufacturers are unable to realize.£©¡£
8th, support feeding, fluctuation, revolving carving, about functions and so on push pedal.
9th, the RDC6332G system is the RuiDa technology the technical development the newest generation of laser carving/cutting control system, this control system has the better hardware stability, has a better anti-high-pressured, the anti-electrostatic disturbance characteristic.
10th, based on the LINUX platform development man-machine operating system, has the friendlier operation contact surface and a more formidable function.
11th, this controller use is more perfect the movement control algorithm which, optimizes, its processing speed and the efficiency are before the system is unable and.
Laser cutting (84561000)
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
Main features. 1) Extensive material processing, smooth cutting edge and burr-free, avoid polishing, Processing high speed, high precision, less waste, high efficiency. 2) Suitable for large and medium-sized enterprises in the mass production, and also suitable for small enterprises and individual processing. 3) Operational speed, laser energy real-time tunable, and very easy for customers to operate. 4) Exclusive water warning and automatic protection system, to protect the working life of laser tube effectively. The power control system has exclusive automatic protection equipment to ensure stability and safety of the machine to the best. 5) Import guide rail with high engraving precision 6) Offline control system which can not only work without computer, but also connect to U disk, USB communication 7) Imported metal mirrors, with good ability of reflection and focusing, long working life.
FST 6040-ruida Laser Engraving Machine Model: FST-6040 Laser type: sealed CO glass laser tube Laser power: 40W/50W/60W/80W/100W Engraving speed: 0-30000mm/min Cutting speed: 0-3600mm/min Cutting thickness: 0-20mm ( depends on materials) Resolution rate:0.05mm
Product Name Android MiniPOS Aisino A80 OS Android 7.1 Secure operating system Processor 32-bit, Quad-core, 1.1Ghz application processor High performance secure processor Memory RAM: 1GB (optional 2GB) ROM: 8GB (optional 16GB) Display 5 Color screen 1280 720 Touch Screen Capacitive touchscreen Keys 1 Power key 1 Function key 3 Touch keys WIFI 2.4GHz IEEE802.11b/g/n Communications 4G 3G 2G Bluetooth BT 4.X Card Readers IC card reader NFC reader Camera 2 MP Rear Camera 1D/2D barcode scan Optional: 5MP rear zoom camera GNSS GPS GLONASS BeiDou Indicator Lights 4 NFC LEDs 1 Charging indicator Audio Speaker Microphone Card Slots 1 SIM 2 PSAM Battery 3.85V/3000mAh Dimensions 150 75 16mm L W H Weight 220g Peripheral Port 1 USB OTG, Type-C, 5V Environmental Operating temperature: 0 ~ 50 Storage temperature-20 ~ 70 Relative humidity 5%~95%, Non-condensing Optional Configurations ASD18 Bluetooth Printer Docking Station
Supplier: Solar equipments, laser equipments, instruments and meters and so on
Applicable material: leather, wool fabric, paper, plastic, cloth, pvc, Organic glass, rubber, wooden product, bamboo product, crystal jade, etc. Pplicable industry: this model is suitable for garment, shoes, leather, Fabric toy, computer embroidery, advertising, handcraft, packaging print, model, etc. Dimension :1450*1100*1100mm, weight:about 195kg, processing area, 900*600mm
YH-G8050 laser engraving cutting machine adopts professional moving control design with high speed, high precision and epilog appearance. Technical parameter: Laser type: co2 glass laser tube Laser power: 50w Engraving area: 720x500mm Cutting area: 750x500mm Appearance size: 1170x1160x885mm Engraving speed: 0 - 1200mm/s Cutting speed: 0 - 300mm/s Cutting thickness: 0 - 8mm Positioning precision: plus or minus0.01mm Characters: 1.5mm english letter Format support: ai, bmp, plt, dxf, dst etc Power supply: ac220vplus or minus5% / 50hz - 60hz Power of machine: less or equal 900w Applicable industries: Packing printing: paper carton, knitting bag, handbag, rubber board for printing. Advertisement: acrylic cutting, label making, double-colored board engraving. Art and gift: wood, bamboo, image, ornament, prize's engraving. Leather and garment: leather, leatheroid, garment embroidery and sample. Others: sample, marking, model-making, surface drawing, decoration etc. Applicable material: Acrylic, wood, bamboo, paper, leather, cloth, double-colored board, marble, jade, rubber, glass, crystal, plastic and other non-metal materials. Features: 1. Professional design with elegant appearance customized for the users in different industries. 2. Various file formats (ai, bmp: 1bit, plt, dxf, dst etc) are supported by software for all graphs and words. 3. Unique no-water warning and automatic protection system protecting the lifetime of the laser tube effectively. 4. Precise red light positioning shows laser position. 5. Automatic up-down platform is easy and flexible motorized up and down the table, better for engraving material with different height. Size of packing: 135x107x134cm G.W.: 255 Packing: plywood
Laser power: 70w. Cutting size: 700mmx500mm. 1450x1000x1100mm.
