Shanghai Sanden Behr Compressor

Brand name: denair Model: dacy-12/10 Cooling system: wind cooled Compressor temperature: £¼32¡æ Pressure: 0.1033mpa Altitude: £¼1000m Working pressure: 1.0mpa Air deliveyr: 12.0m3/min Air end compression stage: single stage Compression Rotor material: sae1141 (special Carbon steel) Gear type: the 3rd generation type ¦á asymmetric gear (gear ratio 5:6) Powe method: coupling direct Driven/diesel driven Oil-gas tank capacity: 90l Lube capacity: 50l Safety valve pressure: 1.1mpa Lube class: no.46 Engine model: yc6b150z-k20 Manufacture: yuchai Type: water cooled/4 stroke/direct Injection Cylinder no.: 6 Cylinder diameter: 108mm Stroke range: 125mm Rated power: 110kw Rated rotation speed: 2200rpm Non-load speed: 1400rpm Oil-gas tank capacity: 125l All unit l*w*h: 2800*1910*1600mm N.W: 2050kg L*w*h: 2800*1910*1600mm N.W: 2050kg

7.5kw double screw air compressor Quick details Brand nameDream ConditionNew Power sourceAc power TypeDouble screw ConfigurationStationary Motor power7.5kw Driving modeBelt driven Lubrication styleLubricated

Quick details Brand nameDream ConditionNew Power sourceAc power TypeDouble screw ConfigurationStationary Motor power11 kw Driving modeBelt driven Lubrication styleLubricated

He intelligent controller with multiple functions inspects the changeable pressure constantly and changes the rotating speed accurately to ensure the consistency of displacement and air demand in the user¡¡¥s system.The response speed of the intelligent controller is calculated in millisecond and the modification on speed is finished within 3ms to control the air pressure at the outlet within the minimum scope precisely.

1. Original imported airend from Germany, the most advance airend in the world 2. Original imported key components 3. Low Engergy Consumption, Low runing, maintenance cost. 4. Aptitude and intelligent Control, PLC control, LCD displayer. 5. Unique safe units make whole compressor more safty, more stable, lest noise, lest energry Loss. 6. Easy to install, operate, maintent. Model SCR10I-7 SCR10I-8 SCR10I-10 SCR10I-13 Capacity/Pressure (m3/min.Mpa-1) 1.2/0.7 1.1/0.8 0.9/1.0 0.8/1.3 Motor Power(KW) 7.5KW(10H.P) Speed(r/min) 2878 Starting way Directly startup Volt(V) 380(440/220) Motor safety grade IP54 Motor isolation grade F Electrical Supply 380V/50HZ/3Phase or 440(220)V/60HZ/3Phase Outlet Temperature( ¿¼C ) í- Enviroment Temperature í+ 8¿¼C Driven way Belt Driven Noise level at 1 meter 68 í+ 3dB(A) Cooled method Air cooling Oil content 1 ~ 3 ppm Outlet Connection Rc 1/2 " Dimension Length(mm) 1050 Width(mm) 600 Height(mm) 950 Weight(kg) 250

Configuration characteristics 1. A precisely-made central bracket is used to keep the motor aligned permanently with the air end. 2. A highly resilient coupling is adopted to make the compressor operate smoothly, and the elastomeric is long in useful life. 3. The discharge pipe is double-wall corrugated pipe, and the oil way uses a special high-pressure hose which is resistant to temperature up to 125¡ãc. 4. For the extremely high temperature conditions in some districts, the large-area plate heat exchanger and high- efficiency water chiller are used. 640kg

7.5kw permanent magnet vsd screw air compressor #aircompressor Air capacity: 1.3m3/min @ 7bar; 1.2m3/min@8bar Power: 7.5kw 10hp Voltage: 380v/50hz 3phase Outlet connect: G3/4" Weight: 190kg Diemension: 890*590*570mm We offer full range screw type air compressors, welcome to contact us.

Note: A represents air-cooling type, w represents water-cooling type; Working environment temperature: - 5 degree ~ 45 degree; The exhaust temperature is less than environment temperature about + 10degree ~ 15 degree Driving mode: belt transmission; Startup mode: direct start under 11kw, and y-delt start above 11kw; Work power: 380v / 50hz, 460v / 230v / 6kv and 10kv voltages can be made for customers; F.A.D volume flow test is according to asmc ptc9 or iso1217 standard (gb/t3853). When our products improve, material may change without notice! Accept customer special request type, and less than 1.5 map models orders. Startup mode: direct start under 11kw, and y-delta start above 11kw; Work power: 380v / 50hz, 460v / 230v / 6kv and 10kv voltages can be made for customers; F.A.D volume flow test is according to asmc ptc9 or iso1217 standard (gb/t3853). When our products improve, material may change without notice! Accept customer special request type, and less than 1.5 map models orders. Ps: we also supply portable screw compressor and direct screw compressor for customers! 1100*8000*980mm, 380kg

Note: A represents air-cooling type, w represents water-cooling type; Working environment temperature: - 5 ¡ãc ~ 45 ¡ãc; The exhaust temperature is less than environment temperature about + 10 ¡ãc ~ 15 ¡ãc. Driving mode: belt transmission; Startup mode: direct start under 11kw, and y-¦¤ start above 11kw; Work power: 380v / 50hz, 460v / 230v / 6kv and 10kv voltages can be made for customers; F.A.D volume flow test is according to asmc ptc9 or iso1217 standard (gb/t3853). When our products improve, material may change without notice! Accept customer¡¯s special request type, and less than 1.5 map models orders. Startup mode: direct start under 11kw, and y-¦¤ start above 11kw; Work power: 380v / 50hz, 460v / 230v / 6kv and 10kv voltages can be made for customers; F.A.D volume flow test is according to asmc ptc9 or iso1217 standard (gb/t3853). When our products improve, material may change without notice! Accept customer¡¯s special request type, and less than 1.5 map models orders. Ps: we also supply portable screw compressor and direct screw compressor for customers! 1100*8000*980mm, 380kg