Copper rod continuous casting and rolling line
Aluminum(scrap) rod continuous casting and rolling line
Lead alloy plate continuous casting and rolling line.
This line is designed to produce 8mm low oxygen and bright copper rods by means of continuous casting and rolling. The raw material is cathode copper or red copper scraps. This line is composed of one or two 6-100 ton stationary reverberatory furnace(s), five-wheel casting machine, pulling machine, rolling shearer, straightener & angle shaver, cast bar brushing machine, rolling machine, bright rod orbital coiler, electrical control system, etc. The 12t/h melting shaft furnace and 12t holding furnace are provided when copper cathode are used. 4. Main technical data 1) Outlet copper rod dia. 8mm 2) Production capacity around 16t/h 3) Coil’s weight 3.0-5.0 ton 4) Main equipment total size: 42x7.8x5.1m (melting furnace and recycling cooler & filter excluded) 5) Main equipment total weight( melting furnace excluded) 82 ton 6) Main equipment total power(melting furnace excluded) 600kw 5. Line composition 1) Five-wheel continuous casting machine (patent no. Zl00244512.3) 1 set 2) Automatic shearer 1 set 3) Straightening & shaving machine 1 set 4) Cast bar brushing machine 1 set 5) Automatic feeding continuous rolling mill 1 set 6) Continuous rolling mill emulsion lubrication system 1 set 7) Rolling mill oil lubrication system 1 set 8) Coiler 1 set 9) Electrical control system 1 set Nude packing in container
Aluminum alloy rod continuous casting and rolling line by foshan metech aluminum technology co., ltd Aluminum and alloy rod continuous casting&rolling line; aluminum alloy rod&wire, al or wire rod manufacturers The aluminum rod continuous casting and rolling line equipment is used to produce aluminum rod and al-mg-si etc. Alloy rod with a high intensity and heat resistance in diameter 9.5mm, 12mm, 15mm by means of continuous casting and rolling. The line is competitive with the relative international products. Main components of aluminum alloy ccr lines Furnace with magnetic mixer or tilting furnace, in-line degassing & filtering system with launder, refining feeding device, five- wheel casting machineand pouring ladle, roller shearer, motorized straightener, multi-frequency induction heater, cast bar feed-in device, rolling mill, alloy rod quenching system, alloy rod cooling systems, dual-position coiler, electrical control system, rolling mill lubrication system and emulsion system, etc Brief flow chart Raw material¡úmelting furnace¡úholding furnace¡úflow channel¡úcasting ladle¡úcasting machine¡úoil hydraulic shearer¡úinitiative material feeding device¡úcontinuous rolling mill¡úquenching device¡úpulling device¡úcontinuous take-up (predeformation)¡úcoiler.
1. Current overload or line surge shutdown 2. High temperature compressor shutdown. 3. High pressure alarm shutdown. 4. Low pressure alarm shutdown. 5. Low oxygen cocentrator alarm. Oxygen concentrator: 0.5-5L/min Purity: 95%+_3% Working system Continuous Power Supply AC230V.50Hz/AC220V.60HZ AC120V.60Hz Power: 390VA Net Weight: 16kg( Gross weight: 18.5kgs) Warranty: Long-life compressor designed for 1000 hours of maintenance-free use. Size: 33*26*54cm
Technical code 1. Melting furnace Upright cupola 2. Melting speed of copper plate 8-16t/h 3. Time of starting melt 2h 4. Material feeding mode Skip bucket style 5. Capacity of material feeding lifter 3t 6. type of heat retaining furnace hydraulic incline and action type 7. Effective volume of heat retaining furnace 6-10t 8. Max. incline and action angle of heat retaining furnace ¬â70 íµ 9. Oxygen consumed amount of copper furnace (copper bar per ton at normal production NG:50-70m3 LPG:40-60kg 10. shaft furnace and inner line of holding furnace All use sic molding brick 11. up and low flow slot Closed style integrated flow slot 12. fuel to be used NG/LPG 13. Diameter of gas supply NG:DN100-150/LPG:DN80-100.
Soft Roll (Cast Padding) Specifications: 10 cm.X 3m 15 cm.X 3 m 20 cm X3M Description Soft Roll Cast Padding are available in low adherent gauze cover and is applied over dressing to provide low adherent wound interface. They are made to have excellent absorbency, which promotes healing healing and also protects the wound. The white cast padding is non- woven and is made using viscose fibers, which brings comfort to the patient while plastered. These cast padding are used before any type of bandage to protect the skin or where swelling is expected. Specially used for sensitive or tender skin, these cast padding can also be used as Leg Roll, Long sponges etc. Cast Paddings give excellent skin tolerance, Perfectly conforms to your body contours, allowing easy body movements. It acts as a cushion between the skin and the plaster. Prevents skin maceration. There are less chances of pressures sores occurring in your body. The padding allows normal breathing of the skin. Absorbs exudates and sweat. The paddings has low moisture retention, hence reducing the risk of skin maceration and minimizes the formation of ridges. Orthopedic Padding protects bony prominences, and can be used under all types of casting materials. Its is a economical, user-friendly, and safe product. Made from 100% polyester fibers. They have no optical brighteners. Available in various sizes in roll form with paper wrapper.
Supplier: Copper cathode shaft melting furnace, copper scrap stationary reverberate furnace, aluminum melting & holding furnace, alloy auxiliary equipment, environment protection system, low oxygen copper rod continuous casting and rolling production line, oxygen free copper rod continuous up-casting line and cold rolling mill, aluminum rod continuous casting and rolling line, aluminum alloy rod continuous casting and rolling line, wheel &, lead extruder, continuous extrusion (conform) machine, spare parts of above machines, material granulation, drying, cooling equipment, precise forging, metallurgical machinery
Supplier: Rebar Rolling Production Line, Continuous Casting And Rolling Production Line, Intermediate Frequency Induction Melting Furnace
Our products 57mm*48mm thermal paper rolls are a common paper roll size for credit card terminal printers. It is widely used for every market. Below is detail information for this product. MODEL # T574801 Product Description: Type: Single White Thermal Paper Roll Width: 57mm Roll Diameter: 48mm Weight: 55gsm Length:25meters Core size:13mm*19mm paper core Package: 10rolls shrink-wrapped ,100rolls per carton Carton size: 246mm*246mm*234mm Duration: 3years End of paper roll with red warning line 100% lint free paper reduces printer jams Specifications for Thermal Sensitive paper: