Sell Grinding Steel Ball

Dia 20mm --- dia 150mm; the high, medium and low chrome alloyed casting iron balls: dia17mm --- dia 190mm. By steel drum

Shandong Huamin Steel Ball Joint-stock Co., Ltd. is the largest manufacturer and exporter of grinding balls and grinding rods, it was established in 1986, and it already have 36 years grinding media experience. Our annual production capacity is 200,000tons, and products are mainly exported to America, Canada, Chile, South Africa, Australia, Guinea, Mali, Mongolia and so on. We hold the only automatic roll forging machine for grinding steel ball in China which developed by ourselves. The raw materials that we use are high quality alloy steel. The hardness of grinding steel ball is high and steady; the toughness is good controlled by equipment. The quality of our products can meet different requirements of clients in different countries and regions. 1. Forged grinding steel balls Want higher grinding efficiency? For gold mining or cement industry? Then you can choose forged grinding steel balls, which are available in all stages of milling. Huamin forged steel ball can be divided into low carbon, medium carbon, high carbon steel ball based on the carbon percentage. The carbon content is below 1.2%. The chromium content is 0.1%-1.3%. 2. Cast grinding steel balls As another type of grinding media, cast grinding steel balls can provide Cr (1%-28%), hardness (HRC40-66), and Diameter (10mm-150mm) alloy cast steel balls. They can be divided into low chromium, medium chromium, high chromium, super high chromium grinding ball (CR20%-28%). The forged steel grinding ball is excellent in surface quality, toughness, and resistance to impact and abrasion. It won't crack and lose circularity easily. 1) In general, forged grinding steel ball has high hardness: Surface hardness to 55-67 HRC, volume hardness of 56-64 HRC 2) impact toughness high: Impact toughness more than 12 J / cm2. 3) broken rate is low: Peel fragmentation resistance property of over 20000 times. The actual breakage rate not greater than 1% and close to 0.

Introduction: Dry mill casting steel balls for grinding in power plant Size: diameter 17-150mm Description: High hardness, good wear resistance, good toughness, even wearing, no breakage. Product category: Low chromium casting grinding steel ball Hardness: hrc45-55

(1) Product Superior raw materials, advanced automated equipment, unique heat treatment technique and strict quality control system contribute to better performance for the general hardness of shandong iraeta grinding steel ball. 1) production standard Yb/t091-2005 2) size: 25-150 mm 3) surface hardness Hrc57-67 hrc 4) volume hardness Hrc56-64 5) breakage rate

Our product has precise size, high hardness, high roundness and mechanical properties. It won't deform and crack during its service life. The surface hardness of our product can reach up to 57HRC to 67HRC, and volume hardness can reach up to 56HRC to 64HRC, the difference between the hardness of surface and center are no more than 2HRC. Besides, the impact toughness of our product is greater than 12J/cm2. Further more, the breakage rate of our product is no more than 1% and are close to 0. Our product are widely used in processing facilities such as the iron&steel plant, mineral processing plant, refractory material plant and phosphate fertilizer plant, etc. Above all, all of our products can be customized according to customers’ requirements.

1. Company name: shandong huamin steel ball joint-stock co., ltd. 2. Year of established: 1986 3. Productforged steel ball, rolling forged steel balls, grinding steel balls used in the ball mill and sag 4. Diameter: 20mm to 160mm(1) 5. Material: c: 0.47-1.05 si:0.17-0.37 mn:0.5-1.0 s:0.035max p:0.035max cr:1.2max mo: 0.15max 6. Production technology: huamin mainly have three kind of production technology for forged steel balls. 1) air hammer forged steel balls 2) rolling-forged automatic production line designed by our ourselves, this production line is controlled by automatic equipment, so the hardness is high and toughness is good. 3) rotary-cut automatic production line, this production line gets five national patent. Currently, we mainly use this production line to produce forged steel balls, so the product quality is quite steady and good. 7. Inspection Huamin have a full set of inspection equipment.We can test hardness, hadness distribution, chemical composition, impact value, micro-structure, dropping test and so on. 8. Packing Huamin have two kinds of packing method: steel drums or container bags, this two kind of packing can both meet the requirement of repeated shipping and storage, customers can choose any one.

Application: Mines, cement plants, power stations Process: .Raw material .Cutting .Heated .Forged .Quenching .Tempering .Testing .Qualified products .Packing Unbreakable 0.5max Place of origin hebei, china (mainland) Brand name goldpro Model number gn-2 Application powder station, cement, mining.. Material steel Dimensions 130mm Density 7.80-7.85g/cm3 Impact to broken (times) 20, 000 Izod impact strength 12-35j/cm2 Hardness surface58-61hrc , core 56-63hrc Breakage rate real 0.3% Material b2/b4/b6/bu/65mn/60mn meet client's specical needs Standard yb/t091-2005 Packing weave bag 1000kg/bag*steel drum/850kg/drum Productive technology forging /hot-rolling Certification iso 9001-2008 ;iso14001:2004;gb/t28001-2001 1, container bag:gw 1000kg (1.5 kg/per bag) 2, iron drum: Gw 1000kg to 20mm-40mm, Gw 960kgs to 40mm-60mm, Gw 930kgs to 60mm-80mm, Gw 900kgs to 80mm-100mm, Gw 850kgs to 100mm-150mm, (18kgs/per drug)