Features
Complies with 802.3u 10/100base-tx and 100base-fx standard
Provide one fiber connector and one utp connector
Auto-detection of half/full duplex transfer mode for tx port
Auto-negotiation of 10/100mbpa rate and auto-mdix for tx port
Provide switch configuration of half/full duplex transfer mode for fx port
Led indicators provides status to easily monitor network activity
External or internal power supply
Compact size
Can be used in 2u rack
Parameters :
Standards: ieee802.3 , ieee802.3u , ieee802.3x
Data rate : 10/100mbps
Operating wavelength: multi mode: 850nm, 1300nm, 1310nm &
Single mode: 1310nm, 1550nm
Transmit distance: multi-mode: 2km5km & single mode: 20-120km
Fiber interface: sc, st and fc are available
Fiber type: multi-mode: 50/125um, 62.5/125um single mode: 9/125 um
Rj45 port utp cable -100ohm up to 100m
Power supply: input-220vac, -48vdc
Power consumption:5w
Operation temperature: 0~70
Storage temperature: -40~85
Humidity: 5%~95%(non-condensing).
Kington packing.
Fiber optic media converter 10M/100M media converters and 1000M media converters Products capability: According with the protocals: IEEE 802.3 IEEE 802.3u Fast Ethernet and IEEE802.3ab Support long data packet Easily for setting and debugging Technology specification: Wavelength:1310nm and 1550nm LAN port speed:10M/100M and 1000M Transimission distance:20km 40km 60km 80km 120km
Stand alone Managed 10/100/1000Base-Tx to 10/100/1000Base-Fx Media Converter SUN Telecoms stand alone Ethernet Media Converter is offers a cost-effective product to transmit distances up to 120km (Single-mode fiber). It makes it easy to incorporate the advantages of fiber-based connection technology in a managed Ethernet/Fast Ethernet network. Integrated Auto Cross-over MDI/MDI-X and NWay capabilities make it simple to deploy within a network. Also, the í¦hot-swappableí¦ design is ideal for scaling the system up or down quickly. Features: Web, SNMP, Console management Hot-swappable module Available with ST, SC, or WDM Simplex SC single-fiber connectors Auto MDI/MDI-X on copper port Auto-negotiation on copper port LED status for Link/Activity, LFS, 100, Loopback, and Full Duplex/Collision Link-Fault Signaling illuminates to indicate link failure Link-Fault Signaling function can boot up redundant link if network is installed with primary and redundant link Local and remote loopback
Technical parameter 1.Standards:ieee802.3u fast ethernet 10/100base-tx and 100base-fx 2.Connectors:(rj45-utp and fiber sc) 3.Led:power.Fdx/col, fx-link/act, txlink/act, fx100.Tx100 4.Data tranfer mode: 10/100mbps 5.Duplex mode :full or half duplex mode 6.Power requirement:ac 100-260v dc1a +5v 7.Ambient temperature:0 - 70degree 8.Humidity:5% - 90%(noncondensing) 9.Dimenstons:26*71*97mm 10.Cable:cat.5 utp cable 11.Fiber: multi-mode Specification Connector type: sc Typical distance: 60km Fiber type: singlemode Wavelength: 1310nm Min tx pwr: -5.0dbm Max tx pwr: -1.0dbm Sensitivity: -35.0dbm Link budget: 29.0dbm
The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is an economical solution to achieve long distance transmission base on current status. Technical parameters: 1. Standard Protocol: IEEE802.3 10 Base-T standard IEEE 802.3u 100Base-TX/FX standard IEEE 802.3z 1000Base-TX/FX standard 2.Connector:oneUTPRJ-45connector,oneSC/STconnector 3. Operation mode: full duplex mode or half duplex mode 4. Power supply parameter: outside: 5V DC 2A; built-in: 110-265V AC 48VDC 5. Environmental temperature: -40C~+85C. 6. Relative humidity: 5%-90% 7. TP cable: Cat5 UTP cable 8. Transfer fiber: multi-mode: 50/125, 62.5/125 or 100/140m single mode:: 8.3/125, 8.7/125, 9/125 or 10/125m.
Fiber Optic media converter can transform the transmission media of Ethernet signal from CAT5 to optical fiber. It can extend the transmission distance to several kilometers or hundred kilometers. Using media converter is a economical solution to achieve long distance transmission base on current status. SC,FC,ST fiber ports available. Expand aple poly ephylene, carton.
Features: -Broadcast filtering, address auto learning and auto-update feature and th operating mechanism of store and forward. -Cache size: 256KB, address table size: 4KB -Ethernet 10Base-T or 100Base-TX or 1000Base-T to 1000Base-LX fiber optic media converters -Support IEEE 802.3, IEEE 802.3U, IEEE 802.3X, IEEE 802.3z/AB, IEEE802.1d -Supports full-duplex or half-duplex backpressure flow control flow control, and with Auto-Negotiation function -Interface supports 1000Mbps, 100Mbps, 10Mbps, can use with notthe same rate. -TX/RX dual-header Standard SC interface -Electronical interface supports 10Mbps, 100Mbps, 1000Mbps -Automatically adapt , optical interface work rate 1000Mbps port -Integration of high-quality photovoltaic modules to provide good optical properties and electrical properties to ensure reliable data transmission -Status LEDs on link/connection status, dynamic data transfer/ full duplex / half duplex/rate status. -Provides one RJ-45 interface supports auto-electrical cross connect switches, hubs -Power Consumption: 4.5 W (Power adapter input AC-85V~ 265V) -Over 50,000 hours consistent working period. Transmission fiber: Multi-mode: 50/125, 62.5/125 or 100/140166;204;m Single-mode: 8.3/125, 8.7/125, 9 / 125 or 10/125166;204;m Operating temperature :0-50 161;227; C Storage temperature: -40-70 161;227; C Humidity: 5% -90% non condensing.
â?¢ 1 Port 10/100M Media Converter, Single Mode Dual Fiber â?¢ Half or full duplex auto-negotiation â?¢ 10/100 Mbps auto-negotiation for copper port â?¢ Auto MDI/MDI-X for copper port â?¢ Complies with IEEE 802.3u, IEEE 802.3X, IEEE 802.3 â?¢ Support Link Fault Pass Through function â?¢ Plug-and-play installation â?¢ Extend network distance up to 100 km â?¢ SC/FC/ST fiber port optional, WDM â?¢ Can be build in 2U 14 slot media converter chassis
ForTronix 10G Managed Fiber Optical Media Converter Open SFP+ Slot converts and extends a 10G connection over fiber optical cables. And it extends the network transmission distance from 100m via copper cables to 100 km via fiber optical cable. Moreover, this Fiber to Ethernet converter has a durable all-steel chassis and offers simple plug-and-play installation. At the meantime, it supports for full-duplex operation, and its Jumbo Frame support provides efficient network operation. In addition, this versatile 10G Managed Fiber Optical Media Converter Open SFP+ Slot is compatible with most 3COMâ?¢, Ciscoâ?¢, Lucentâ?¢ and Nortelâ?¢ networks and fully complies with applicable IEEE 802.3 standards. Furthermore, its design widely applied to home, office and private sectors applications.
APT-103M22CC Optical media module 1.According with ieee802.3 ieee802.3u ieee802.3x Ieee802.1q 100base-tx 100base-tx 100base-fx standard. 2.Afford tcp/ip, pppoe, dhcp, icmp, nat protocol. 3.Flow control:full-duplex adopt ieee802.3x, half-duplex adopt backpressure standard. 4.Electric port support auto-negotiation function, autoconditioning transmit mode and transmit speed. 5.Port supply auto-mdi/mdix automatic reverse. 6.Support storage transmit mode. 7.Support electric port's 10m 100m mode and self-adapt mode to switch. 8.Afford the state indicator, external power(output 5v~50hz 1a) 9.Interface:electric port:rj-45 fiber port:sc 10.Twisted-pair:cat5 cat6 11.Multimode fiber: 50/125, 62.5/125um 12.Working temperature:0~50 degree 13.Storage temperature:-20~70 degree 14.Humidity:5%~90%(noncondensing) Connect type: sc Fiber type: multimode Wavelength: 1300nm Typical distance: 2km Min tx pwr: -19.0dbm Max tx pwr:-14.0dbm Sensitivity:-31.0dbm Link budget:12.0dbm