Gl35 Series Cds Photoresistor

Supplier: PIR sensor, CDS photoresistor, light sensor, analog optoisolator, PIR motion detector module, fresnel lens, light dependent resistor

All-Purpose Dual Element Pyroelectric Infrared Radial Sensor D204S The pyroelectric infrared sensor detects infrared radiation on the basis of the characteristics that the polarization of pyroelectric material changes with temperature. Dual compensated sensing elements are applied to suppress the interference resulting from temperature variation. As a result, the operating stability of the sensor is greatly improved Our products can be used in many applications. 1. Security systems 2. Burglar alarms 3. Light switch control 4 intellectualized toy 5. Visitor acknowledgement Standards and specifications: Recommended Model: D204S small window Encapsulation Type: TO-5 IR Receiving Electrode: 21mm, 2 elements Window Size: 3*4mm Wavelength: 514m Transmittance: 75% Output Signal[Vp-p]: 3500mV Sensitivity: 3300V/W Detectivity (D*): 1.4 108 cmHz1/2/W Noise[Vp-p]:

D203S Pyroelectric infrared radial sensor The pyroelectric infrared sensor detects infrared radiation on the basis of the characteristics that the polarization of pyroelectric material changes with temperature. Dual compensated sensing elements are applied to suppress the interference resulting from temperature variation. As a result, the operating stability of the sensor is greatly improved Our products can be used in many applications. 1. Security systems 2. Burglar alarms 3. Visitor acknowledgement 4. Light switch control 5. Intellectualized toy Standards and specifications Recommended Model: D203S small window Encapsulation Type: TO-5 IR Receiving Electrode: 2,1mm, 2 elements Window Size: 4,3mm Spectral Response: 514m Transmittance: 75% Output Signal[Vp-p]: 3500mV Sensitivity: 3300V/W Detectivity (D*):1.4 ,108 cmHz1/2/W Noise[Vp-p]:

5mm Photoresistor/LDR sensor Photoresistor is a resistor which made of semi-conductor material, and the conductance changes with luminance variation. The photoresistor can be manufactured with different figures and illuminated area based on this characteristic. Photoresistor is widely used in many industries, such as toys, lamps, camera, etc. Tipycal Applications for cds photoresistor 1. Camera automatic photometry 2. Photoelectric control 3. Indoor ray control 4. Annunciator 5. Industrial control 6. Light control switch 7. Light control lamp 8. Electronic toy. Cheap 5mm LDR photocell Fast response to daylight Great spectrum characteristics High reliability, good price Direct supply. 100pcs/small package, 1000pcs/ big package.

Typical applications: * Replacement of Photoresistor (CdS). * Control of backlight brightness for LCD Monitors,TV sets, PDA ,Cameras and Mobile Phones. * Switch for lighting equipments and Toys. * Testing for daylight. Features: * Linear output conforming to illuminance. * Built-in optical filter for spectral response similar to that of the human eye. * High Gain Photocurrent Amplifiers IC * Temperature Stable. * Low dark current and Low working Lux. * RoHS Compliant / Pb-free / Cd-free. 1000pcs/package.

We develop and produce various kinds of remote controllers, including universal remote controllers. Ordinary and special remote controllers for VCD/DVD. And special-purpose FBTfor black-and-white colorful TV. These series of our products are applied to TV, VCD, DVD, MP3, combined acoustics, network system, set-top-box, home theater, sound appliances in the car, air conditioner, satellite reciever, karaoke disc system, power amplifier, portable CD/VCD/DVD and etc. 250pcs/carton, carton meas :69*43*23cm ,G/W:20kgs/ctn.N/w:19kgs/ctn.

Please pay a visit to the VR tour of our production department. https://displaybly.com/vr/ https://displaybly.com/VR/LCD-COG-Binding-Workshop-VR-Tour/ Item Symbol Min Typ MAX Unit Condition Forward Voltage Vf(G) 2.9 3.1 V IF=20mA WL WD 572-592 nm IF=20mA Luminous Uniformity Pe 75 % IF=20mA Luminance Lv(G) 15 20 Cd/m² IF=20mA DISPLAYBLY (SZ) TECHNOLOGY CO., LIMITED was established in 2003 in Shenzhen, China. The group has integrated with R&D, production, marketing opto-electronics products and display devices. Our company has obtained TUV entity factory certificaties and implemented the ISO quality system management. Our products past ROHS, CE, REACH, UL certificates and so on. Our civil business partners are excellent companies in their industries and Chinese listed companies. Our international partners are all over the world, particularly in Japan, Europe and Middle East countries. We are capable of supplying LED backlight series products, LED series products, LCD series products and touch panel series products for long term productive relationships .

Visible light sensor IC Rohs compliant Replacement of cds The gb5a series is a low cost visible light sensor, with a Current output which is directly proportional to the light Level. It has a built in optical filter to provide a Response which is close to the human eye, or f¼photopicf¼. The output current can be converted to a voltage by Connecting it in series with a resistor. The dynamic range Is determined by the external resistor and power supply (10k and 5v gives a range of 0 up to 250 lux, but this can Be over 900 lux with a 1k resistor). The internal dark Current cancellation enables high accuracy over the full Temperature range, even at low light levels. Features Near human eye photopic response High ir rejection +c integrated optical filter Current output highly linear vs light level Temperature stable Integrated high gain photocurrent amplifier Darkcurrent cancellation Applications Dawn/dusk sensing Night view surveillance camera Display backlighting in laptops, mobile phones, lcd tvs Nightlights . Moq 1, 000pcs

Remote Control IR Repeater/ IR Extender with 1 Receiver & 2 Emitters ( for 2 AV Devices ) and USB 5V adaptor U102-P This unit U102-P can be used to extend the IR signal up to 2 Devices. Remote Control IR Repeater/ IR Extender can be used with weak IR Remote control signal from players such as IPTV. CD/VCD/DVD/ Blu-ray, Home System, Television, Setup box, recorder, CATV, Karaoke system, etc. It is also recommended for Players/ Equipments which are concealed in console or cabinet. Operating at 34KHz ~ 60KHz, This IR Repeater is the smallest yet powerful IR repeater with high speed transmission without delay. Series available as follows : U Series powered by USB 5V and D series powered by DC12V U101, U101A, D101 --- 1 Receiver 1 Emitter ( for 1 AV Equipments ) U102, U102A, D102 ---1 Receiver 2 Emitters ( for 2 AV Equipments ) U104, U104A, D104 ---1 Receiver 4 Emitters ( for 4 AV Equipments ) U101-P. U101A-P, U102-P, U102A-P, U104-P, U104-AP etc. – USB 5V Adaptor Included U101, U101A, U102, U102A, U104, U104A etc. – USB Power Adaptor not included PACKAGES : 1. USB Adaptor 5V 500mA Our U series which is powered by USB adaptor ( Included ) can also be powered by connecting the USB cable to the USB port on your AV Equipment. 2. IR Emitter Cable ( 2 IR Emitter heads ) to DC3.5mm Male 1m IR Emitter Cable is one which to be stuck the Emitters on the IR Point of your respective AV equipments and DC3.5mm is to connect with Item 3. 3. USB to IR Receiver Length 2m. IR Receiver to DC3.5mm 2m USB is to be connected to USB adaptor or your AV device for power. INSTALLATION : 1. Clean the surface of your AV equipments. Stick the IR Emitter on each the IR point of your AV Equipments. Connect the ends of two DC3.5mm cable. 2. Place the IR Receiver such a way that it is facing your remote control. 3. Connect the USB to USB Adaptor/ USB port of AV Equipment for power 4. Power up & all is ready to go. TECHNICAL SPECIFICATION : Receiving Frequency ( Broadband ) : 34KHz ~ 60KHz Emitting Frequency ( Broadband ) : 38 KHz & 56KHz Receiving Distance : 8 meter Emitting Distance 10-20 cm Power Consumption < 30mA Dimension for Receiver & Emitter : 31 (L) ×17 (W) ×13 (H) mm, 13 (L) ×8 (W) ×5. 5 (H) mm Input AC 100-240V/ Output DC 5V : USB 5V 500mA FREQUENTLY ASKED QUESTIONS : 1. How to locate the IR Point of the AV Equipment? A. Set up as per the installation procedures without step one. With the help of an assistant controlling the AV equipment Remote Control, move the IR Emitter around on the window of AV equipment until signal sent is received. 2. Remote Control doesn't work after installation ? A. Check the power status of your AV equipment B. Check the connection of USB to AV Equipment/ Power adaptor C. Ensure that remote control is facing the IR receiver ( Flashes red when a signal is sent ) D. Check the position of IR Emitter. E. Place IR Receiver away from Plasma or CCFL screen as it may affect the remote control signal. F. Contact your dealer if the situation does not improve after the above alteration. Box, 310g