Home Gsm Alarm System S110

The GSM Alarm System S110 with multi-functions. It integrated GSM Module inside, and almost all useful functions and features of the alarm systems in the worldwide markets. Also it with innovative and experienced functions and features to meet the required and potential demands.

The GSM Alarm System S110 is a new security protection solution. It is special for home, house and office and other applications. It based on Wireless GSM Communication network; it can alert you by SMS and calling.

The GSM Alarm System S110 supports two way voice communication and wiretap by intelligent technology. It can answer the incoming call as well as dial out to the others. It is very useful for user to create voice communication or listen in the houses.
The GSM Alarm System S110 supports Watchdog, once the sensor in this zone triggered in the preset time, will not alarm, if the sensor hasn’t been triggered in the preset time, will alarm. It is useful for monitoring elders, children, and the person on-duty.

The GSM Alarm System S110 equips with two output relay, one is link-output relay, special for switch on or off appliance while the system alarm, another is independent output relay, it can be switched on or off by SMS commands..

The GSM Alarm System S110 equips with LCD display entire operation menu, all operations and settings are visual and intuitive!

The GSM Alarm System S110 supports GSM Jammer interference!

The GSM Alarm System S110 with user friendly design idea, all operations and settings are visual and intuitive!

What you need is a SIMCard which supports Call ID function.

What advantages of the S110?
1. Two-way Voice communication or wiretap are available;
2. LCD displays the entire setup menu;
3. Armed, Partial Armed(At House or Stay), Disarmed, SOS are available;
4. Armed delay, alarm delay, siren work or not, more other functions are Programmable by user;
5. Watchdog,24Hours Zone, SOS zone are available;
6. Using ICON to display armed, Partial Armed, Disarmed, Power status, Siren status and GSM Signal status.
7. Auto-detect and report, GSM Signal Jammer alarm, SMS Switch is available.

Functions & Features of the GSM Alarm System:
Ø GSM Frequency: Dual-Band(900/1800MHz), Quad-Band is optional(850/900/1800/1900Mhz) ;
Ø Supports armed, Partial armed(At House or Stay) or disarmed, SOS by remote control or mainframe keyboard;
Ø Supports armed, disarmed, inquiry mainframe status, switch on or off relay output by SMS Commands;
Ø Automatically send SMS Alert and dial to the pre-set cell phone when any sensor had been triggered;
Ø Equips with 8 Wired zones, the attribute (Normal/At House or Stay mode) and Zone Name is editable, NC NO EOL is programmable;
Ø Equips with 16 Wireless Zones, zone attribute (Normal/At House or Stay mode) and Zone Name is editable;
Ø 3 X 24-Hour zones for smoke and gas leakage sensor,1XWatchdog zone for monitoring elder or child, 1XSOS zone for emergency help;
Ø Supports 3 SMS Alert Numbers and 5 Calling alert numbers and 20 Alarm Records for owner review;
Ø Supports Timer for automatically arm or disarm the system;
Ø Supports armed delay to give enough time to you go out the home, the delay time is editable by user;
Ø Equips with 1 Alarm-Link output relay, once the system triggered, the output will switch on for 4minutes;
Ø Equips with 1 independent output relay, it can be switch on or off by SMS Commands. This is very useful for remote switch on light or off while you’re in another city in the night;
Ø The Keypad can use as a dialer, the functions like the Cell phone;
Ø The external power failure & recovery alert function is optional ;
Ø Supports wiretap through the internal microphone;
Ø Supports internal Speaker to special user for two-way voice communication;
Ø It is Compatible with PT2262/2264 and PT2242 wireless IC;
Ø Standby internal rechargeable battery which can last 12 hours;
Ø Based on the GSM communication network and Operation Menu Display technology, apply to wide range situations.
Ø More programmable functions and features are available.



Mainframe X1
Remote control X2
Wireless PIR Motion Sensor X1
Wireless Door magnetic Sensor X1
Wired Siren X1
GSM Antenna X1
AC/DC AdaptorX1.

User Manual


Optional Accessories (Wireless):

Combined Light and Siren PIR Motion Sensor Glass Break Sensor

Magnetic Window Sensor Magnetic Steel Scrolling Door Sensor

Infrared Photoelectric Beam Fence Wireless Strobe Siren

Our Other Wireless Sensors

Operating voltage: dc 12v
Static current: ¡ü20ma
Alarm current: ¡ü400ma
Wireless receiving frequency: 315mhz¡à0.5mhz
Wireless receiving sensitivity: 315mhz¡à0.5mhz
Anti-interference: 1v/m£¨frequency:20-1000 mhz£©
Gsm frequency: 900/1800mhz
Outer alarm siren volume: 110db
Working condition: temperature: -10¡æ¡«40¡æ
Humidity: ¡ü90%


Capacity for wireless device: 10pcs

WAVECOME GSM module.
10 wireless zones(1 wireless SOS zone, 1 wireless fire alarm zone, the other 8 wireless zones can be defined by user) and 1 external power failure alarm zone.
You can connect wireless emergency button, wireless PIR sensor, wireless door/window contact, wireless smoke detector, wireless gas leakage detector, wireless glass break sensor etc. Each wireless zone can match numberless wireless sensors.
With LCD display and Control keyboard on the mainframe.
Send SMS to 3 preset mobile phone numbers and Auto-dial 3 preset phone numbers while alarming.
You can listen what happened in the alarm area while alarming.
With AC power status monitor function and password protection function
With fixed time arming/partial arming/disarming function
Control the alarm system by Control keyboard ,remote control or SMS.
Modify 8 wireless zones¡¯ name and check the system status by SMS.
Define the 8 wireless zones as arm/partial arm by control keyboard on the mainframe.
Switch to Backup rechargeable battery when the power is failure or cut by intruder and send SMS.
Wireless Emergency function(24 hours zone):you can press the button to alarm immediately in order to get help if in emergencies.
Wireless signal transmission,and don't fear for cutting wire by the intruders.
Can send alarm signals to monitoring center through GSM network, such as the police station.
GSM frequency:
GSM900/1800MHZ
GSM850/900/1800/1900MHZ.

Size:290(L)*270(W)* 85(H) mm
G.W.:1.1kgs.

Name: gsm home alarm system-g60
Landline and gsm dual network communication, ( cdma netowk optional )
Ademco contact id through gsm

Main features:


6 group sms, landline and gsm dual network communication
Ademco contact id through gsm, ( cdma for optional )
Program the phone numbers directly on the panel
Lcd and blue back-up light
85 event log, interphone function
6 groups timed auto arm/disarm, away/stay arm optional
Every zone can be programmed seperately
Every detector can be set to doorbell when disarmed
Every remote can be set to request assistance siren on/off
Siren could be set to sound when away arming
Unique watchdog function, monitor the old, patient or important place.
Built in rechargable battery;built-in siren, and timer.

Technical parameter:
Working voltage£º100~240vac
Operating power: 9-15vdc
Gsm frequency:900/1800mhz, 850/900/1800/1900mhz
Wireless frequency:433mhz
Static current: ¡Ü 80ma
Alarm current: ¡Ü 500ma
Gsm transmission power: 2w
Operating environment: temperature: -10-50; humidity:90%
Wired zone : 4
Wireless zone: 8(totally:51 sensor)

- power adpater 1pc.
- user manual 1pc.


Standard package:
- security alarm system (control unit) 1 pc.
- wireless pir detector 1 pc.
- wireless door (gap) sensor 1 pc.
- remote controller 2 pcs.
- antenna 1pc.

good quality GSM security home alarm system
Main Features:
1. Indicate lights show GSM signal status to find the best control panel place position.
2. control panel is compatible 1527&2262 chip detectors(2262 chip remote controller, 1527 chip PIR, etc) in the same zone.
3. SMS program without any keypad.
4. Anti attack zone, the system auto dial and sms alert to preset phone numbers without active the siren.
5. Record 10 seconds voice message. The voice message can be the alarm address, etc
6. Auto-dial six phone numbers and send text messages when system is activated.
7. Listen in what happens in the spot remotely.
8. Two way intercom function remotely via phone.
9. 8 intelligent wireless zones, which can code 160pcs wireless detectors in total. And the quantity of wireless detectors coded to each zone is unlimited.
10. 4 intelligent wired zones automatically recognize the wired detectors.
11. Each zone include the wired zones can set be the independent zone: Internal zone, the whole defensive zone, 24-hour emergency zone, Delay zone, Closed zone, Anti attack zone.
12. Use telephone or mobile phone remote control the system via input password to listen in, intercom, arm, disarm, switch on/off, etc.
13. Four-button wireless remote controller to Away arm, Home arm, Disarm, Emergency help. Users also can use our wireless intelligent keypad to control the system if the family has members or do not like taking remote controllers.
14. Build in one output relay, which can set be alarm linkage(can connect with another siren or siren with flash/strobe). The relay also can control home appliance: lights, airconditioner, cooker, etc.
15. Wired zone4 port can connect with wireless siren or horn.
16. SMS program. Users send their sms commands to the control panel then the panel will confirm the password and save the commands automatically. The LED light show you the commands whether are correct. If not, need try again.
17. Delay arm function: allow people have enough time to go out without activating the system.
18. Delay alarm function: allow people have enough time to enter the house without activating the system.
19. SMS informs users when electricity is off/on.
20. SMS informs users when the control panel is low voltage.
21. the control panel build in recharageable battery, so it will still work when electricity is off.
22. the control panel can support several sirens.
Technical parameters:
GSM control panel:
Operating voltage: DC12V
Average power: AC/DC
Wireless receiving sensitivity: -108db
Available wireless Frequency: 315/433MHz
Working Condition: Temperature ¨C25¡æ¡«+ 45¡æ
Humidity ¡Ü 90%Rh
Capacity for Wireless Device: 160pcs

Standard Package list of the GSM Alarm System:
Control panel X1
Remote contoller X2
Wireless PIR Motion Sensor X1
Wireless Door magnetic Sensor X1
Wired Mini Siren X1
GSM Antenna X1
AC/DC Adapter X1
User Manual X1
The users can add other sensors such as wireless password keypad, PIR, siren with flash/strobe, etc.




1.4kg per set
10 sets per carton
carton size:34cmx34cmx54cm.

6. Built-in speaker and microphone

7. Remote two-way intercom

8. Extra sms phone number for system''s status

9. Alarm memo, entry delay, exit delay

10. Hybrid alarm, 30 wireless zones, 4 hardwired zones

11. Advanced zone attribute, user-friendly zone names

12. Temperature display and relay signal output

13. Support wireless lcd/led keypad and wireless siren

14. Support user code and installer code

15. 100 alarm log

16. Sms alert, when system: arm/disarmed, sensor''s low battery, ac power failure, phone line disconnect

17. Reset factory design

18. Built-in siren

19. Alarm communication via ademco contact id protocol

20. Backup rechargeable battery, last more than 24 hours

21. Work with ip camera

Color box:19*14.5*9cm, 22units/ctn

1. Touch keypad; big lcd displays (capacitive touch screen times, new experience )
2. Gsm+pstn dual network. If pstn is disable, it will switch to gsm automatically

3. Calendar+5 alarm call(sms) no.+1 alarm center call no.+ 1 sms number to upload system status+ 10s record+ arm delay + alarm delay + alarm beep setting+ call-in time setting+ wireless program+ zone attribute setting+ user password + program password + reset +100 alarm history and status history

4. 30 wireless zones + 8 wired zones, every zone attribute, name, bypass, alarm delay, intelligent door sensor function, beep indication could do free setting.

5. Alarm inform mode: pstn call, gsm call, gsm sms

6. Alarm sms include alarm zone and sensors name

7. Work with contact id protocol(alarm information, status information, ac power off and recover, low voltage, test)

8. Support wireless ¡¡ãding-dong¡¡à doorbell function

Color box:34.5*23*7.8cm, 10units/ctn

e, name, bypass, alarm delay, intelligent door sensor function, beep indication could do free setting.

5. Alarm inform mode: pstn call, gsm call, gsm sms

6. Alarm sms include alarm zone and sensors name

7. Work with contact id protocol(alarm information, status information, ac power off and recover, low voltage, test)

8. Support wireless ¡¡ãding-dong¡¡à doorbell function

Color box:34.5*23*7.8cm, 10units/ctn

Product Features

1. Multi-language words menu WIFI + 3G/GSM+GPRS+SMS home alarm system

2.Android + IOS APP application easily control, Easy to give authorization.

3.Free charges through WiFi network. When there is no WIFI, the host will work with GPRS network. If there is neither WiFi nor GPRS network ,then the alarm host will send alarm SMS and make alarm call.

4.Work with IP camera, The IP camera APP embeds in the host APP.
Users can monitor what happen at home wherever and whenever.

5.Workable with 100pcs smart socket/wireless relay output to control simple home appliances. Relay outputs name and sockets name can be revised by users

6. 8 scene settings and 20 ifttt settings.
Advanced home automation functions for perfect smart home life.

7.Workable with RFID wireless keypad

8.10-20s Leaving message remotely in APP. Alarm speed is low 10s so that can inform users promptly.

9.Information push promptly when AC power lost or recovered or detectors in low voltage

10.Smart zone function: self-checking windows/doors status and chime reminds if door open

11.30 wireless defense zones, Zone names can be revised by users

12.Support â?�ding dongâ?� doorbell function

13.Can store 6 alarm call phone No.+2 alarm SMS phone No.

14.Support Three zone types: 24H line, 1st line, 2st line.

15.Arm/alarm Delay for each defense zone. Timed arm/disarm function

16.Built-in rechargeable battery

17.The host support Monitoring and two-way intercom function

18. Support external wireless siren(internal wireless siren optional)

19.Built-In powerful performance MCU master based on 32-bit Cortex-M3 core.

Product parameter

Product dimension:185mm*125mm*14.7mm(L*H*T)
Input voltage:DC5V2A(mico USB)
Standby current