Richrui Full Automatic Rhinestone Machine

Ultrasonic Rhinestones Hot Fixing Machine/Rhinestones machine/ Hot-fix setting machine(Half-auto) Applications: women's wear, underwear, children wear, chiffon, velour, jean, knitted sweater, leather, silk, garment factory, hats, jeans, ties, bags, shoes, curtains Operation Mechanism The control mechanism can make the machine fix rhinestones on the material by using Power Transducer, Ultrasonic generator and Vacuum generator. Positioning the red/ infrared light spot on the right point manually, ultrasonic will come out automatically and produces a high frequency vibration over the rhinestones and then is transformed to the heat energy instantly. Therefore the rhinestone is fixed on the material surface permanently. Stone diameter available: Size 6#-30# (diameter 2mm-6mm)Glass Octagon Stone, Aluminum Octagon Stone, Round Aluminum Stone & Plastic Piece with Adhesive. Main Features: l Humanized large screen Chinese/English display l Safe operation, no damaging to the material l SANWO cylinder made in Korea l ARK Two-position Three-way Solenoid valves made in Korea l CKD Direct Solenoid made in Japan l Accurate infrared positioning l Heating system: Ultrasonic without press again l Environment protection and noiseless; Low power consumption, smaller size l High efficient production with 24 hours operation l Suitable for both thin & thick fabrics. l Instruction book: Chinese, English, Arabic. Technical Data: l Max Speed: 130-150 pcs/min (more than 5 workers with manual way) l Power Supply : 220V / 50HZ, 110V/60HZ l Gas power: 0.3-0.5MPA l Air Pressure : 5-6kg/cm l Ultrasonic Power: 200W l Ultrasonic Frequency : 28KHz l Static Capacitance: 2300-2700PF l Five size air nozzle for various size rhinestones: 6#(¦µ1mm),10#(¦µ1.5mm),16#(¦µ2mm),20#(¦µ2.5mm),30#(¦µ3.5mm) l Double head working table size: 1100*800mm, single head:400*350mm l Color available: blue & green & white available l Double head :Gross/Net Weight : 85KG /65K l Single head: Gross/Net Weight:66KG/56KG l Wooden package size:Double head: 0.81*0.655*1.13m, 0.6CBM; single head: 0.67*0.67*1.13m,0.51CBM l Warranty: electricity system parts for 1 year ,air system half year l Packing:Carton / wooden packing with desiccant material. Wooden case is under Fumigation, ventilation treatment available.

(Single Head Computerized Cap, T-shirt, Flat Embroidery Machine) Flat embroidery area :450*350mm; Cap embroidery:270¡ã; T-shirt embroidery area: 450*290mm; Speed :200-850RPM; Stitch Length:0.1--12.7mm; Memory :1 million stitches. Max 2 million; Total Machine package size:1.0 CBM; Total Gross Weight :160KGS; Memery Format :read files in Tajima(DST); Input:USB port £» Power Source :Single Phase: 110V/60Hz or 220V/50Hz available ; Power Consumption :0.5-1KW ; Warranty: one year (we give you good quality parts for machine. so it is not easy to be broken for them. we will send you new spare parts for free if any broken; online service of solving your trouble if any, solve ways for the common questions on the User's Instruction Book); Specification : Dahao computer system ; 3.8" color LCD monitor with USB port; with automatical thread cutting and color changing; Motor :Brushless DC Motors, BLDC. Portable table and stand with wheels for easy moving around; standard spare parts and accessories, Tool kit; wooden /carton package. Cap attachment included: 2 x cap rings per head that snap into cap station for preparation then embroidery. 1 xhoop station per machine for easy snap in and snap out preparations of caps. 1 x cap driver per head that snaps into embroidery machine¡¯s bracket holder for hoops. Hoops/frames included: ¡ñ 2 x Shirt Front Round Hoop 9 cm (3.5") ¡ñ 2 x Shirt Front Round Hoop 12 cm (4.7") ¡ñ 2 x Shirt Front Round Hoop 15 cm (5.9") ¡ñ 2 x Shirt Front Round Hoop 20 cm (7.87") ¡ñ 2 x Jacket Back Square Hoop 29 x 29 cm (11.4" x 11.4") ¡ñ 2 x Jacket Back Square Hoop 45.5cm x 29.5cm (18" x 12") ¡ñ 1 x Flat-bed Sash frame Operation: English, Spanish, Portuguese, Turkish, Chinese available on the Display Screen; ENGLISH Users¡¯ Manual E-Book to show how to use it. Application£ºcan do logo, letter and other designs embroidery on Cap/hat, Cloth,Finished garments, bedspread, curtain etc. Lead Time :within 15 days for 2 sets, within 20 days for 5 sets after confirming the down payment Minimum Order Quantity£¨MOQ£©: 1 set. Payment term£ºaccording to our company rule, 30% should be paid by T/T in advance as down payment, 70% should be paid by T/T before machine delivery. Wooden /carton package.

Control 5inch Keypad LCD screen Frame driving :Stepping Motor Embroidery area :350x350mm Max Speed :70-80 beads/min Ultrasonic power :450W Ultrasonic frequency :35KHZ Static capacitance :2700-3100PF Vacuum Packaging (in a wooden case)

Item code:15984-CS Item Name:Mesh Tape Embroidery 51"/52" Design:very assorted Quantity:About 5,000M Quality:Grade"A" and Full Roll Price:$1.06/M

HEMMER Automatic Panel Hemming Machine One of the most time consuming part of mattress production is flanging the quilted panel. With the higher demand on thicker mattress panels, overlocking of the panels became inevitable, because it becomes impossible to sew the thick panel by the tape edging. However, the conventional flanging process brings a lot of labor and inaccurate end sizes of the panel. Full automatic process Two Working Modes: Synchronized with your existing quilting machine Feeding the roll of quilt Side and Length Cutting and Sewing 4 needle double chain-stitch heavy duty sewing unit (right and left sew ing head) 4 needle double chain-stitch heavy duty sewing unit (cross sewing head) Adjustable width and length of the quilt Adjustable distance between left and right head with motor Wide range of quilt thicknesses Material exit with conveyor Automatic thread cutting Accurate finishe measures of the quilts Automatic side-waste removal system to the reserve High safety systems Servo driven system User-friendly software Easy tape edging of the quilt after closing Online maintenance and training service One HEMMER has the capacity of 5 flangers. There is no panel cutter needed The finish size of panel after flanging may end up with high tolerances while it is always accurate with the HEMMER Ability to use as panel cutter only Unlike conventional panel cutters; with the new HEMMER, there is no possibility of skipped stitches at the cutting edge, since the hemming is before the cutting Your tape edging is more fluffy with the HEMMER. The overlocking completely closes the edge of the material while hemming keeps your panel edge open to make the tape fluffy Ability to adapt the HEMMER with any existing multineedle quilter. High quality chainstitch sewing heads Max. Speed: 20-22 seconds per panel (may change according to the filling) Max. Material thickness: 7.5 cm (may change according to the compressibility of the material) Number of sewing heads: 3 Max. Quilt width: 2.50 m Min. Quilt width: 1.40 m Min. Quilt length: 75 cm Automatic thread cutting Automatic side waste removal system Full automatic process with 4 sides cutting and hemming 4 needle chain-stitch sewing head for the transversal cutting and sewing Ability to adapt any multineedle quilter Ability to work with pre-quilted material Ability to set up timing of the looper-needle adjustment without any mechanical setting Reliable OMRON Sysmac Controller Ability to use as panel cutter only Durable FESTO pneumatic system with low air consumption Product video link : https://www.youtube.com/watch?v=aD9dB_5UONA Product video link : https://www.youtube.com/watch?v=KaPEo4Dl2U4

KYK-S is the one of the highest speed tape edge machine in the market with heavy duty, smooth PFAFF 5625 sewing head which is simply the strongest in the world. The reduced training time and operator fatigue makes the tape edging operation much easier with the day long performance stability. The motorized belt and the synchronized mattress rotating arm makes the operator stands stationary and brings easy cornering. Even the heavy premium mattresses are flipped within seconds thanks to heavy duty flipping system. The adaptable continuous mattress flow system brings the mattress to the machine and takes it out to the next stations after tape edging is done. The continuous flow system lets the operator sew all the time and reduce a great deal of labor cost. - Easily produces 200-250 mattresses in 8 hours (190cm x 90cm) - Standard PFAFF 5625 chainstitch sewing head - Ergonomic design that allows high capacity even for heavy mattresses - Comfortable cornering thanks to slippery conveyor metarial - Full automatic proccess with a single foot pedal (All the speeds are auto - adjusted according to pressing amount) - Automatic head lowering at the corners - Minimum operator fatigue - Full automatic parametric corner turning system - Automatic foot lift - Interpolated driven 90° mattress turning arm - No deformation on the conveyors thanks to the arm load hanger system

Supplier: Embroidered appliques, bridal sash, wedding sash, rhinestones appliques, crystal sash, beaded sash, beaded appliques, appliques, motifs , patches, embroidery, hand embroidery ,bracelets, sash, embroidered sash, bridal bracelets, crystal bracelets, crystal vintage, necklaces, bridal necklaces, crystal necklaces, appliques, crystal embellishment, rhinestones embellishment, crystal belts, rhinestones belt, embroidered sash, embroidered bracelets, embroidered necklaces, accessories, wedding, sewing trim, sewing appliques, bridal crystal belt, bridal rhinestones sash, handicrafts, appliques, motifs, beaded patches, beaded fabrics, sweatshirts embroidery, evening dress embroidery, bridal dress embroidery, dress embroidery, bridal embroidery, beaded patches, embroidery patches, custom embroidery patches, costume embroidery patches,
Services: Manufacturer & exporter, distributor

Supplier: Women's block printed, and solid hand embroidered, machine embroidered tunics, dresses, shirts, tops, blouses, skirts and pants. fabrics: cotton, rayon, cotton flax, linen, polycottons, crepe, georgettes and many more