These flairs, made in gray and white colors, are used in wall, ceiling, steel construction and concrete installations.
Being halogen-free, in the event that these flairs burn, the gas released is not harmful to humans.
Code Diameter Inch Packaging Quantity Packaging Form
EK-0327 16 mm 1/4 3.000 ad. Sack
EK-0328 20 mm 1/2 2.000 ad. Sack
EK-0329 25 mm 3/4 1.000 ad. Sack
EK-0330 32 mm 1 750 ad. Sack .
Foam-based waterproof double-coated adhesive tapes For applications where waterproofing and strong adhesion are required Using a highly-flexible foam base, provides an excellent adherence to uneven surfaces. Excellent for waterproofing properties as well as strong adhesion performance. Based on flexible thin-layer foam backing. Exhibits good followability to substrate undulations and excellent adhesion and waterproofness. Adheres strongly to metals and plastics. Excellent adhesion to polypropylene and other plastic materials. Halogen-free (*Chlorine compounds are purposely not blended.) Contains none of the six hazardous materials restricted by the RoHS Directive
PA6+GF+MF+CF, PA6+GF+FR, PA6 FR Halogen free, PA6+GF Red phosphorus FR, PA6+ABS alloy, for all colours AIE PA6 GRADES PA6 GP 5010 0 HB General purpose GF 50G3 15 HB Glassfiber reinforced 15%, 20%, 25%, 30%, High rigidity, Heat resistance, Dimension stability 50G4 20 HB 50G6 30 HB FR 5010N 0 V2 Flame retardance, High rigidity 5010F 0 V0 Flame retardance, High flowability 5010FGN 0 V0 Non-halogen flame retardance, good electrical property FR & GF 50G3F 15 V0 Glassfiber reinforced 15%, 20%, 25%, 30%, Flame retardance, High rigidity, Heat resistance 50G6F 30 V0 ST 5010ST 0 HB High impact, Dimension stability, Cold resistance 50G6ST 30 HB WR 5010WR 5 HB Wear resisatnce PA6/ABS Alloy 5210F 0 V0 Weatherability, Chemical resistance. Note: GF--Glassfiber, FR--Flame Retardant, ST--Super Tough, HR--Heat Resistance, WR--Wear Resisatnce, CF-Carbon Fiber, MF-Mineral Fiber 25kg/bag .
Non-flame resistant halogen-free rigid and coil pipes are manufactured in any color desired and can be used problem-free and with confidence in concrete and sub plaster electrical installations. Being halogen-free, in the event that these rigid and coil pipes burn, the gas released is not harmful to humans. Manufactured with Ø 16 - Ø 90 mm nominal diameters.
These elbows, made in gray and white colors, are used in wall, ceiling, steel construction and concrete installations. Being halogen-free, in the event that these elbows burn, the gas released is not harmful to humans. Code Diameter Inch Packaging Quantity Packaging Form EK-0321 16 mm 1/4 1.000 ad. Sack EK-0322 20 mm 1/2 500 ad. Sack EK-0323 25 mm 3/4" 500 ad. Sack EK-0324 32 mm 1 300 ad. Sack .
Design Name ôfireguardö bs Typemulticore, armoured, zhls sheathed, fire retardant. Part no.Ac zh bs 01 (001 to 064) Standardsbs: 6724 Iec 332 part 3a, Iec 60754, Bs en 50267, Bsen 50268, Applicationintended for use in interunit and interpanel connections of electrical & electronic equipments for commercial & residential buildings, mass rapid trasportation systems, underground metro rails & stations. Drum length of 250-500-1000 meters
Halogen free pcb Base material: fr4, fr1, fr2, ceramics, aluminum, rogers, f4b, f4bk, f4bt, tp, pf, cem-1, cem-3, etc. Board thickness: 0.30 to 3.20mm (12 to 26mil) Copper thickness: 0.50 to 5 ounce Solder mask: lpi solder mask, conventional solder mask, peelable solder mask, uv solder mask Minimum line width: 0.1mm (4mil) Minimum line space: 0.1mm (4mil) Minimum hole diameter: 0.25mm (10mil) Pth hole diameter tolerance: +/-0.076mm (+/-3mil) Npth hole diameter tolerance: +/-0.03mm (+/-1.2mil) Maximum board size: 460 x 620mm (18 x 24) Board finishing type: hot air leveling, soft gold, hard gold, immersion gold, gold fingers Vacuum packing in carton
SteriMed Powderfree Latex Examination Gloves provide yet another complimentary alternative to meet the stringent demands of diverse users Ideal for medical use these gloves undergo an advanced halogenation washing process which minimizes sensitivity to allergic reactions * These lowprotein gloves also feature a specially textured surface to improve grip Pigment free with no fillers or waxes they offer better protection as they are less likely to absorb body fluids * Natural Rubber Latex * Ambidextrous * Manufactured in accordance with ASTM D3578 EN 455 FDA specifications * Low levels of soluble protein to further reduce incidences of skin sensitivity reactions * Micro roughened nonslip surface for optimal sensitivity * Fitting Beaded Cuff for easy donning * Continuous polymer coating buffers wearer from direct contact with latex to further reduce the risk of skin irritation
7/8³ Halogen-free RF Cable FEATURES / BENEFITS Low Attenuation The low attenuation of CELLFLEX coaxial cable results in highly efficient signal transferin your RF system. Complete Shielding The solid outer conductor of CELLFLEX coaxial cable creates a continuous RFI/EMI shield that minimizes system interference. Low VSWR Special low VSWR versions of CELLFLEX coaxial cables contribute to low system noise. Outstanding Intermodulation Performance CELLFLEX coaxial cable's solid inner and outer conductors virtually eliminate intermods. Intermodulation performance is also confirmed with state-of-the-art equipment at the RFS factory. High Power Rating Due to their low attenuation, outstanding heat transfer properties and temperature stabilized dielectric materials, CELLFLEX cable provides safe long term operating life at high transmit power levels. Wide Range of Application Typical areas of application are: feedlines for broadcast and terrestrial microwave antennas, wireless cellular, PCS and ESMR base stations, cabling of antenna arrays, and radio equipment interconnects. Meets or Exceeds: IEC 60754-1, -2; IEC 60332-1-1, -2;IEC 61034-1, -2; IEC 60332-3-24 (formerly IEC 60332-3-C)
- Product Name: Halogen-Free Polyolefin Flame Retardant /MH-HF800 - Advantages MH-HF800, is a halogen free environment-friendly flame retardant with N and P, non-APP based FR system. MH-HF800 has higher thermal stability and decomposition temperature. Test past: --UL94 V0 (0.75mm) --70 168hrs water-immersion (UL746C) --GWIT 750 --GWFI 960 --Free from the restrictions of RoHS Directive 2002/95/EC approved by the EU and the Council Besides, wires and cables with MH-HF800B can reach the standard of UL1581 VW-1. - Characteristics: Low density, Lower smoke generation, Less mold corrosion. Polyolefin with MH-HF800 have not the phenomenon of water-sliding surface during extrusion, and sieves can be added during the process. - Applications: PP, PP with GF, TPE, PE, XLPE wires and cables. - Specifications: Appearance: White Powder Density: 1.8±0.2 g/cm3 Phosphorous Content: 20.0-22.0% Nitrogen Content: 23.0-25.0% Water: 0.5% max Water Solubility: 0.5 g/100ml max PH: 3.0-4.5 Average Particle Size: 10 (D50) �¼m Decomposition Temperature: 270 min - Package and Storage 25kgs kraft bag with plastic lining or by customer requirements. Handle with care, keep air-tight and dry.
